Selective Adsorption of Flavonoids on Cerium-doped Ferroferric Oxide Magnetic Particles

2021 ◽  
pp. 462189
Author(s):  
Jing Liang ◽  
Ke Min ◽  
Piao Long ◽  
Xuqian Weng ◽  
Qun Huang ◽  
...  
Keyword(s):  
Magnetic Particles ◽  
Selective Adsorption ◽  
Ferroferric Oxide

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

A magnetic super lattice

1987 ◽  
Vol 45 ◽  
pp. 360-361 ◽  
Author(s):  
M.D. Bentzon ◽  
J. v. Wonterghem ◽  
A. Thölén
Keyword(s):  
Thermal Decomposition ◽  
Oleic Acid ◽  
Magnetic Fluid ◽  
Magnetic Particles ◽  
Carbon Film ◽  
Thick Layer ◽  
Amorphous Iron ◽  
Super Lattice ◽  
Carrier Liquid ◽  
Median Diameter

We report on the oxidation of a magnetic fluid. The oxidation results in magnetic super lattice crystals. The “atoms” are hematite (α-Fe2O3) particles with a diameter ø = 6.9 nm and they are covered with a 1-2 nm thick layer of surfactant molecules.Magnetic fluids are homogeneous suspensions of small magnetic particles in a carrier liquid. To prevent agglomeration, the particles are coated with surfactant molecules. The magnetic fluid studied in this work was produced by thermal decomposition of Fe(CO)5 in Declin (carrier liquid) in the presence of oleic acid (surfactant). The magnetic particles consist of an amorphous iron-carbon alloy. For TEM investigation a droplet of the fluid was added to benzine and a carbon film on a copper net was immersed. When exposed to air the sample starts burning. The oxidation and electron irradiation transform the magnetic particles into hematite (α-Fe2O3) particles with a median diameter ø = 6.9 nm.

EFFECT OF APPLICATION OF FIELDS ON THE DOMAIN STRUCTURE IN SMALL REGULARLY SHAPED MAGNETIC PARTICLES

1988 ◽  
Vol 49 (C8) ◽  
pp. C8-1817-C8-1818 ◽  
Author(s):  
S. McVitie ◽  
J. N. Chapman ◽  
S. J. Hefferman ◽  
W. A. P. Nicholson
Keyword(s):  
Domain Structure ◽  
Magnetic Particles

Analysis of magneto rheological elastomers for energy harvesting systems

2020 ◽  
Vol 64 (1-4) ◽  
pp. 439-446
Author(s):  
Gildas Diguet ◽  
Gael Sebald ◽  
Masami Nakano ◽  
Mickaël Lallart ◽  
Jean-Yves Cavaillé
Keyword(s):  
Magnetic Field ◽  
Energy Harvesting ◽  
Shear Strain ◽  
Magnetic Induction ◽  
Magnetic Particles ◽  
Homogeneous Magnetic Field ◽  
Electrical Signal ◽  
Harvesting Systems ◽  
Dc Bias ◽  
Magneto Rheological

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.

Tuning the Magnetic Vortex State in Magnetite Nanodiscs for Remote Control of Biological Signalling

2019 ◽  
Author(s):  
Danijela Gregurec ◽  
Alexander W. Senko ◽  
Andrey Chuvilin ◽  
Pooja Reddy ◽  
Ashwin Sankararaman ◽  
...  
Keyword(s):  
Remote Control ◽  
Ion Channels ◽  
Ground State ◽  
Magnetic Particles ◽  
Colloidal Stability ◽  
Vortex State ◽  
Magnetic Vortex ◽  
Electron Holography ◽  
Dipole Interactions ◽  
Magnetite Particles

In this work, we demonstrate the application of anisotropic magnetite nanodiscs (MNDs) as transducers of torque to mechanosensory cells under weak, slowly varying magnetic fields (MFs). These MNDs possess a ground state vortex configuration of magnetic spins which affords greater colloidal stability due to eliminated dipole-dipole interactions characteristic of isotropic magnetic particles of similar size. We first predict vortex magnetization using micromagnetic stimulations in sub-micron anisotropic magnetite particles and then use electron holography to experimentally investigate the magnetization of MNDs 98–226 nm in diameter. When MNDs are coupled to MFs, they transition between vortex and in-plane magnetization allowing for the exertion of the torque on the pN scale, which is sufficient to activate mechanosensitive ion channels in cell membranes.<br>

Preparation and Properties of Arrays of Very Small Magnetic Particles.

1987 ◽  
Author(s):  
C. D. Graham ◽  
Kaatz Jr. ◽  
Forrest
Keyword(s):  
Magnetic Particles

Application of iron-coated sand on the treatment of toxic metals

2004 ◽  
Vol 4 (5-6) ◽  
pp. 335-341 ◽  
Author(s):  
Jae-Kyu Yang ◽  
Yoon-Young Chang ◽  
Sung-Il Lee ◽  
Hyung-Jin Choi ◽  
Seung-Mok Lee
Keyword(s):  
Heavy Metals ◽  
Selective Adsorption ◽  
Complete Removal ◽  
Batch Adsorption ◽  
Column Experiments ◽  
Adsorption Behaviour ◽  
Optimum Amount ◽  
Initial Ph ◽  
New Treatment ◽  
Coated Sand

Iron-coated sand (ICS) prepared by using FeCl3 and Joomoonjin sand widely used in Korea was used in this study. In batch adsorption kinetics, As(V) adsorption onto ICS was completed within 20 minutes, while adsorption of Pb(II), Cd(II), and Cu(II) onto ICS was slower than that of As(V) and strongly depended on initial pH. At pH 3.5, ICS showed a selective adsorption of Pb(II) compared to Cd( II) and Cu(II) . However, above pH 4.5, near complete removal of Pb(II), Cd(II), and Cu(II) was observed through adsorption or precipitation depending on pH. As(V) adsorption onto ICS occurred through an anionic-type and followed a Langmuir-type adsorption behaviour. In column experiments, pH was identified as an important parameter in the breakthrough of As(V). As(V) breakthrough at pH 4.5 was much slower than at pH 9 due to a strong chemical bonding between As(V) and ICS as similar with batch adsorption behaviour. With variation of ICS amounts, the optimum amount of ICS at pH 4.5 was identified as 5.0 grams in this research. At this condition, ICS could be used to treat 200 mg of As(V) with 1 kg of ICS until 50 ppb of As(V) appeared in the effluent. In this research, as a new treatment system, ICS can be potentially used to treat As(V) and cationic heavy metals.

Core-Shell Molecularly Imprinted Polymer Nanocomposites for Biomedical and Environmental Applications

2019 ◽  
Vol 25 (34) ◽  
pp. 3633-3644
Author(s):  
Nasrullah Shah ◽  
Saba Gul ◽  
Mazhar Ul-Islam
Keyword(s):  
Food Processing ◽  
Selective Adsorption ◽  
Environmental Applications ◽  
Core Shell ◽  
Template Molecule ◽  
Hollow Core ◽  
Imprinted Polymer ◽  
Adsorption Selectivity ◽  
Molecularly Imprinting Polymers ◽  
Relative Adsorption

: Core-shell polymers represent a class of composite particles comprising of minimum two dissimilar constituents, one at the center known as a core which is occupied by the other called shell. Core-shell molecularly imprinting polymers (CSMIPs) are composites prepared via printing a template molecule (analyte) in the coreshell assembly followed by their elimination to provide the everlasting cavities specific to the template molecules. Various other types of CSMIPs with a partial shell, hollow-core and empty-shell are also prepared. Numerous methods have been reported for synthesizing the CSMIPs. CSMIPs composites could develop the ability to identify template molecules, increase the relative adsorption selectivity and offer higher adsorption capacity. Keen features are measured that permits these polymers to be utilized in numerous applications. It has been developed as a modern technique with the probability for an extensive range of uses in selective adsorption, biomedical fields, food processing, environmental applications, in utilizing the plant's extracts for further applications, and sensors. This review covers the approaches of developing the CSMIPs synthetic schemes, and their application with special emphasis on uses in the biomedical field, food care subjects, plant extracts analysis and in environmental studies.

Sign in / Sign up

Export Citation Format

Share Document