Capillary pressure contribution in fabrics as a function of fibre volume fraction for Liquid Composite Moulding processes

2021 ◽  
pp. 128120
Author(s):  
H.N. Vo ◽  
M.F. Pucci ◽  
S. Drapier ◽  
P.J. Liotier
Keyword(s):  
Capillary Pressure ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Liquid Composite Moulding

Modelling Liquid Composite Moulding Processes Employing Wood Fibre Mat Reinforcements

2007 ◽  
Vol 334-335 ◽  
pp. 113-116 ◽  
Author(s):  
R. Umer ◽  
S. Bickerton ◽  
Alan Fernyhough
Keyword(s):  
Composite Structures ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Test Fluid ◽  
Response Data ◽  
Advanced Composite ◽  
Fluid Permeability ◽  
Liquid Composite Moulding ◽  
Wood Fibres

Liquid Composite Moulding (LCM) processes are commonly used techniques for the manufacture of advanced composite structures. This study explores the potential of wood fibres as reinforcement for LCM preforms, considering mats produced using dry and wet methods. The compaction response of these mats has been investigated with and without the presence of a test fluid. Permeability of these mats was also measured as a function of fibre volume fraction. Reinforcement permeability and compaction response data were used to model two different LCM processes. The simulation results have been compared with experiments.

scholarly journals A Numerical Analysis of Resin Flow in Woven Fabrics: Effect of Local Tow Curvature on Dual-Scale Permeability

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 405
Author(s):  
Hatim Alotaibi ◽  
Masoud Jabbari ◽  
Constantinos Soutis
Keyword(s):  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Void Formation ◽  
Fibre Volume ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Resin Flow ◽  
Liquid Composite Moulding ◽  
Proposed Model ◽  
Dual Scale

Permeability is a crucial flow parameter in liquid composite moulding (LCM), which is required to predict fibre impregnation, void formation and resin back flow. This work investigates the dual-scale (micro- and meso-) nature of permeability during resin infusion into woven fabric by incorporating the intra tow flow where the degree of local tow curvature (tow/yarn undulation) is taken into account. The mesoscopic permeability of a dual-scale porous media in a unit cell is estimated using Darcy’s law, where the Gebart analytical model is applied for the intra tow flow in longitudinal and transverse directions with respect to distinct fibre packing arrangements. The results suggest that for a low fibre volume fraction (≤42%), the degree of local curvature at the mesoscale can be neglected. However, for a high fibre volume fraction (>42%) and a higher fibre bundle curvature, the proposed model should be adopted, since the resin flow is affected by a mesoscopic tow curvature that could result in around 14% error in predicting permeability. It is shown that the permeability results of the current study are in good agreement with and in the range of the retrieved available experimental data from the literature.

Effect of fibre content on the mechanical properties of hemp fibre woven fabrics/polypropylene composite laminates

2021 ◽  
pp. 096739112110239
Author(s):  
Sheedev Antony ◽  
Abel Cherouat ◽  
Guillaume Montay
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Composite Laminates ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Woven Fabrics ◽  
Fibre Content ◽  
Viscoelastic Behaviour ◽  
Hemp Fibre

Nowadays natural fibre composites have gained great significance as reinforcements in polymer matrix composites. Composite material based on a polymer matrix reinforced with natural fibres is extensively used in industry due to their biodegradability, recyclability, low density and high specific properties. A study has been carried out here to investigate the fibre volume fraction effect of hemp fibre woven fabrics/PolyPropylene (PP) composite laminates on the tensile properties and impact hammer impact test. Initially, composite sheets were fabricated by the thermal-compression process with desired number of fabric layers to obtain composite laminates with different fibre volume fraction. Uniaxial, shear and biaxial tensile tests were performed and mechanical properties were calculated. Impact hammer test was also carried out to estimate the frequency and damping parameters of stratified composite plates. Scanning Electron Microscope (SEM) analysis was performed to observe the matrix and fibre constituent defects. Hemp fabrics/PP composite laminates exhibits viscoelastic behaviour and as the fibre volume fraction increases, the viscoelastic behaviour decreases to elastic behaviour. Due to this, the tensile strength increases as the fibre content increases. On the other hand, the natural frequency increases and damping ratio decrease as the fibre volume fraction increases.

scholarly journals Insulation Characteristics of Sisal Fibre/Epoxy Composites

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
A. Shalwan ◽  
M. Alajmi ◽  
A. Alajmi
Keyword(s):  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Thermal Characteristics ◽  
Fibre Volume ◽  
Point Of View ◽  
Natural Fibres ◽  
Epoxy Composites ◽  
Ongoing Research ◽  
Sisal Fibre ◽  
The Impact

Using natural fibres in civil engineering is the aim of many industrial and academics sectors to overcome the impact of synthetic fibres on environments. One of the potential applications of natural fibres composites is to be implemented in insulation components. Thermal behaviour of polymer composites based on natural fibres is recent ongoing research. In this article, thermal characteristics of sisal fibre reinforced epoxy composites are evaluated for treated and untreated fibres considering different volume fractions of 0–30%. The results revealed that the increase in the fibre volume fraction increased the insulation performance of the composites for both treated and untreated fibres. More than 200% insulation rate was achieved at the volume fraction of 20% of treated sisal fibres. Untreated fibres showed about 400% insulation rate; however, it is not recommended to use untreated fibres from mechanical point of view. The results indicated that there is potential of using the developed composites for insulation purposes.

New Development of Cattail Fibre in Composite Uses

2013 ◽  
Vol 746 ◽  
pp. 385-389
Author(s):  
Li Yan Liu ◽  
Yu Ping Chen ◽  
Jing Zhu
Keyword(s):  
Mechanical Properties ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Environmental Benefits ◽  
Bending Properties ◽  
New Development ◽  
Original Plant ◽  
Reinforcing Material ◽  
Pp Composites

This paper is aiming to develop the cattail fibre as reinforcing material due to its environmental benefits and excellent physical and insulated characteristics. The current work is concerned with the development of the technical fibres from the original plant and research on their reinforcing properties in the innovative composites. Polypropylene (PP) fibre was used as matrix in this research which was fabricated into fibre mats with cattail fibre together with different fibre volume fractions. Cattail fibre reinforced PP laminates were manufactured and compared with jute/PP composites. The tensile and bending properties of laminates were tested. The SEM micrographs of fracture surface of the laminates were analyzed as well. The results reveal that the tensile and bending properties of cattail/PP laminates are closed to those of jute/PP composites. The mechanical properties of cattail/jute/PP laminates with fibre volume fraction of 20/35/45 is betther than those of laminate reinforced with cattail fibers.

scholarly journals The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)

2015 ◽  
Vol 773-774 ◽  
pp. 949-953 ◽  
Author(s):  
Izni Syahrizal Ibrahim ◽  
Wan Amizah Wan Jusoh ◽  
Abdul Rahman Mohd Sam ◽  
Nur Ain Mustapa ◽  
Sk Muiz Sk Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Concrete Strength ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Polypropylene Fibre ◽  
Experimental Results

This paper discusses the experimental results on the mechanical properties of hybrid fibre reinforced composite concrete (HyFRCC) containing different proportions of steel fibre (SF) and polypropylene fibre (PPF). The mechanical properties include compressive strength, tensile strength, and flexural strength. SF is known to enhance the flexural and tensile strengths, and at the same time is able to resist the formation of macro cracking. Meanwhile, PPF contributes to the tensile strain capacity and compressive strength, and also delay the formation of micro cracks. Hooked-end deformed type SF fibre with 60 mm length and fibrillated virgin type PPF fibre with 19 mm length are used in this study. Meanwhile, the concrete strength is maintained for grade C30. The percentage proportion of SF-PPF fibres are varied in the range of 100-0%, 75-25%, 50-50%, 25-75% and 0-100% of which the total fibre volume fraction (Vf) is fixed at 0.5%. The experimental results reveal that the percentage proportion of SF-PPF fibres with 75-25% produced the maximum performance of flexural strength, tensile strength and flexural toughness. Meanwhile, the percentage proportion of SF-PPF fibres with 100-0% contributes to the improvement of the compressive strength compared to that of plain concrete.

scholarly journals Postheated Model of Confined High Strength Fibrous Concrete

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Kaleem A. Zaidi ◽  
Umesh K. Sharma ◽  
N. M. Bhandari ◽  
P. Bhargava
Keyword(s):  
High Temperature ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
High Strength ◽  
Fibre Volume ◽  
Experimental Results ◽  
Confined Concrete ◽  
Structural Safety ◽  
Stress Strain ◽  
Fibrous Concrete

HSC normally suffers from low stiffness and poor strain capacity after exposure to high temperature. High strength confined fibrous concrete (HSCFC) is being used in industrial structures and other high rise buildings that may be subjected to high temperature during operation or in case of an accidental fire. The proper understanding of the effect of elevated temperature on the stress-strain relationship of HSCFC is necessary for the assessment of structural safety. Further stress-strain model of HSCFC after exposure to high temperature is scarce in literature. Experimental results are used to generate the complete stress-strain curves of HSCFC after exposure to high temperature in compression. The variation in concrete mixes was achieved by varying the types of fibre, volume fraction of fibres, and temperature of exposure from ambient to 800°C. The degree of confinement was kept constant in all the specimens. A comparative assessment of different models on the high strength confined concrete was also conducted at different temperature for the accuracy of proposed model. The proposed empirical stress-strain equations are suitable for both high strength confined concrete and HSCFC after exposure to high temperature in compression. The predictions were found to be in good agreement and well fit with experimental results.

scholarly journals Manufacturing of E-Glass/Epoxy Composite LSU-03 Propeller Using Hand Lay-up Method

AVIA ◽  
2021 ◽  
Vol 2 (2) ◽  
Author(s):  
A Z Dwi ◽  
H Syamsudin
Keyword(s):  
Mass Balance ◽  
Volume Fraction ◽  
Epoxy Composite ◽  
Low Cost ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Small Companies ◽  
Balance Point ◽  
Product Compatibility

Hand lay-up method is frequently used by small companies. It is due to its flexibility and low-cost considerations. One of the qualities problems that normally arises is the product unevenness. This study was carried out to analyse this variation on manufacturing E-glass/epoxy plates specimen and propeller product. Void and fibre volume fraction of manufactured plates are measured based on ASTM-D2734. Propellers of LSU-03 aircraft were manufactured and analysed to find out the uniformity of the product in terms of its mass and size. To determine product compatibility with the design, the geometry and the thickness were measured at several points of propeller. In addition to this, a balancing process is carried out to find out the mass balance point.

scholarly journals Thermal conductivity of textile reinforcements for composites

2018 ◽  
Vol 1 ◽  
pp. 251522111775115 ◽  
Author(s):  
Yue El-Hage ◽  
Simon Hind ◽  
François Robitaille
Keyword(s):  
Thermal Conductivity ◽  
Carbon Fibre ◽  
Volume Fraction ◽  
Fibre Volume Fraction ◽  
Three Dimensional ◽  
Fibre Volume ◽  
Published Data ◽  
Manufacturing Processes ◽  
Composites Manufacturing ◽  
The Relationship

Thermal conductivity data for dry carbon fibre fabrics are required for modelling heat transfer during composites manufacturing processes; however, very few published data are available. This article reports in-plane and through-thickness thermal conductivities measured as a function of fibre volume fraction ( Vf) for non-crimp and twill carbon reinforcement fabrics, three-dimensional weaves and reinforcement stacks assembled with one-sided carbon stitch. Composites made from these reinforcements and glass fibre fabrics are also measured. Clear trends are observed and the effects of Vf, de-bulking and vacuum are quantified along with orthotropy ratios. Limited differences between the conductivity of dry glass and carbon fibre fabrics in the through-thickness direction are reported. An unexpected trend in the relationship between that quantity and Vf is explained summarily through simple simulations.

Sign in / Sign up

Export Citation Format

Share Document