Room-temperature self-healing elastomer-graphene composite conducting wires with superior strength for stretchable electronics

Author(s):  
Pengying Niu ◽  
Nanbin Bao ◽  
Huhu Zhao ◽  
Shuang Yan ◽  
Beibei Liu ◽  
...  
Author(s):  
Luzhi Zhang ◽  
Jiahui Liang ◽  
Chenyu Jiang ◽  
Zenghe Liu ◽  
Lijie Sun ◽  
...  

Abstract Elastomers are essential for stretchable electronics, which have become more and more important in bio-integrated devices. To ensure high compliance with the application environment, elastomers are expected to resist, and even self-repair, mechanical damage, while being friendly to the human body. Herein, inspired by peptidoglycan, we designed the first room-temperature autonomous self-healing biodegradable and biocompatible elastomers, poly(sebacoyl 1,6-hexamethylenedicarbamate diglyceride) (PSeHCD) elastomers. The unique structure including alternating ester-urethane moieties and bionic hybrid crosslinking endowed PSeHCD elastomers superior properties including ultrafast self-healing, tunable biomimetic mechanical properties, facile reprocessability, as well as good biocompatibility and biodegradability. The potential of the PSeHCD elastomers was demonstrated as a super-fast self-healing stretchable conductor (21 s) and motion sensor (2 min). This work provides a new design and synthetic principle of elastomers for applications in bio-integrated electronics.


2020 ◽  
Vol 573 ◽  
pp. 105-114 ◽  
Author(s):  
Liwei Zhao ◽  
Yue Yin ◽  
Bo Jiang ◽  
Zhanhu Guo ◽  
Chunyan Qu ◽  
...  

2020 ◽  
Vol 11 (41) ◽  
pp. 6549-6558
Author(s):  
Yohei Miwa ◽  
Mayu Yamada ◽  
Yu Shinke ◽  
Shoichi Kutsumizu

We designed a novel polyisoprene elastomer with high mechanical properties and autonomous self-healing capability at room temperature facilitated by the coexistence of dynamic ionic crosslinks and crystalline components that slowly reassembled.


Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 583
Author(s):  
Yangyang Pan ◽  
Bo Liang ◽  
Yaran Niu ◽  
Dijuan Han ◽  
Dongdong Liu ◽  
...  

In this study, a new coating material for thermal barrier coating (TBC) or environment barrier coating (EBC) application, Ca3ZrSi2O9 (CZSO), was synthesized and prepared by atmospheric plasma spray (APS) technology. The evolution of the phases and microstructures of the coatings with different thermal-aged were characterized by XRD, XRF, EDS and SEM, respectively. The thermal stability was measured by TG-DTA and DSC. The mechanical and thermal properties, including Vickers hardness (HV), fracture toughness (KIC), thermal conductivity () and coefficient of thermal expansion (CTE) were focused on. It was found that the as-sprayed CZSO coating contained amorphous phase. Crystalline transformation happened at 900–960 ∘C and no mass changes took place from room temperature (RT) to 1300 ∘C. The phenomena of microcrack self-healing and composition uniformity were observed during thermal aging. The of coating was very low at about 0.57–0.80 Wm−1K−1 in 200–1200 ∘C. The combined properties indicated that the CZSO coating might be a potential T/EBC material.


Soft Matter ◽  
2021 ◽  
Author(s):  
Yuxing Shan ◽  
shuai liang ◽  
Xiangkai Mao ◽  
Jie Lu ◽  
Lili Liu ◽  
...  

Abstract. Stretchable elastomers with superhydrophobic surfaces have potential applications in wearable electronics. However, various types of damage inevitably occur on these elastomers in actual application, resulting in deterioration of the...


Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 773 ◽  
Author(s):  
Yuqing Qian ◽  
Xiaowei An ◽  
Xiaofei Huang ◽  
Xiangqiang Pan ◽  
Jian Zhu ◽  
...  

Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C.


2018 ◽  
Vol 105 ◽  
pp. 331-338 ◽  
Author(s):  
Lenny Voorhaar ◽  
Eddie Wai Chi Chan ◽  
Paul Baek ◽  
Min Wang ◽  
Andrew Nelson ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document