A waterborne polyurethane–based leather finishing agent with excellent room temperature self-healing properties and wear-resistance

2021 ◽  
Author(s):  
Chao Liu ◽  
Qing Yin ◽  
Xi Li ◽  
Lifen Hao ◽  
Wenbo Zhang ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Room Temperature ◽  
Waterborne Polyurethane ◽  
Self Healing ◽  
Finishing Agent ◽  
Leather Finishing

Mechanically robust and tough waterborne polyurethane films based on diselenide bonds and dual H-bonding interactions with fast visible-light-triggered room-temperature self-healability

2020 ◽  
Vol 11 (34) ◽  
pp. 5463-5474 ◽  
Author(s):  
Wuhou Fan ◽  
Yong Jin ◽  
Liangjie Shi
Keyword(s):  
Visible Light ◽  
Room Temperature ◽  
Polymer Network ◽  
Waterborne Polyurethane ◽  
Self Healing

A dynamic but mechanically robust and tough polymer network was proposed, in which the fast room-temperature self-healing of our target polymer with mechanically robust and tough features is achieved under visible light.

Autonomous self-healing polyisoprene elastomers with high modulus and good toughness based on the synergy of dynamic ionic crosslinks and highly disordered crystals

2020 ◽  
Vol 11 (41) ◽  
pp. 6549-6558
Author(s):  
Yohei Miwa ◽  
Mayu Yamada ◽  
Yu Shinke ◽  
Shoichi Kutsumizu
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Self Healing ◽  
High Modulus ◽  
Disordered Crystals ◽  
Ionic Crosslinks

We designed a novel polyisoprene elastomer with high mechanical properties and autonomous self-healing capability at room temperature facilitated by the coexistence of dynamic ionic crosslinks and crystalline components that slowly reassembled.

DILLIDUR 450V

Alloy Digest ◽  
2011 ◽  
Vol 60 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Room Temperature ◽  
Surface Hardness ◽  
Heat Treating ◽  
Hot Working ◽  
Resistant Steel ◽  
Bend Strength

Abstract Dillidur 450V is a water hardened wear-resistant steel with surface hardness at room temperature of 420-480 HB. The steel is easy to weld and bend. Hot working is not recommended. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-638. Producer or source: Dillinger Hütte GTS.

scholarly journals Research on Thermal Stability and Properties of Ca3ZrSi2O9 as Potential T/EBC Materials

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 583
Author(s):  
Yangyang Pan ◽  
Bo Liang ◽  
Yaran Niu ◽  
Dijuan Han ◽  
Dongdong Liu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Stability ◽  
Fracture Toughness ◽  
Room Temperature ◽  
Coefficient Of Thermal Expansion ◽  
Atmospheric Plasma ◽  
Thermal Barrier ◽  
Mechanical And Thermal Properties ◽  
Self Healing ◽  
Barrier Coating

In this study, a new coating material for thermal barrier coating (TBC) or environment barrier coating (EBC) application, Ca3ZrSi2O9 (CZSO), was synthesized and prepared by atmospheric plasma spray (APS) technology. The evolution of the phases and microstructures of the coatings with different thermal-aged were characterized by XRD, XRF, EDS and SEM, respectively. The thermal stability was measured by TG-DTA and DSC. The mechanical and thermal properties, including Vickers hardness (HV), fracture toughness (KIC), thermal conductivity () and coefficient of thermal expansion (CTE) were focused on. It was found that the as-sprayed CZSO coating contained amorphous phase. Crystalline transformation happened at 900–960 ∘C and no mass changes took place from room temperature (RT) to 1300 ∘C. The phenomena of microcrack self-healing and composition uniformity were observed during thermal aging. The of coating was very low at about 0.57–0.80 Wm−1K−1 in 200–1200 ∘C. The combined properties indicated that the CZSO coating might be a potential T/EBC material.

Stretchable dual cross-linked silicon elastomer with superhydrophobic surface and fast triple self-healing ability at room temperature

Soft Matter ◽  
2021 ◽  
Author(s):  
Yuxing Shan ◽  
shuai liang ◽  
Xiangkai Mao ◽  
Jie Lu ◽  
Lili Liu ◽  
...  
Keyword(s):  
Superhydrophobic Surface ◽  
Room Temperature ◽  
Superhydrophobic Surfaces ◽  
Self Healing ◽  
Wearable Electronics ◽  
Actual Application ◽  
Potential Applications

Abstract. Stretchable elastomers with superhydrophobic surfaces have potential applications in wearable electronics. However, various types of damage inevitably occur on these elastomers in actual application, resulting in deterioration of the...

scholarly journals Recyclable Self-Healing Polyurethane Cross-Linked by Alkyl Diselenide with Enhanced Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 773 ◽  
Author(s):  
Yuqing Qian ◽  
Xiaowei An ◽  
Xiaofei Huang ◽  
Xiangqiang Pan ◽  
Jian Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Room Temperature ◽  
Amide Bond ◽  
Self Healing ◽  
Healing Efficiency ◽  
Polyurethane Networks ◽  
Combined Action ◽  
Cross Linker ◽  
Dynamic Structures ◽  
External Interventions

Dynamic structures containing polymers can behave as thermosets at room temperature while maintaining good mechanical properties, showing good reprocessability, repairability, and recyclability. In this work, alkyl diselenide is effectively used as a dynamic cross-linker for the design of self-healing poly(urea–urethane) elastomers, which show quantitative healing efficiency at room temperature, without the need for any catalysts or external interventions. Due to the combined action of the urea bond and amide bond, the material has better mechanical properties. We also compared the self-healing effect of alkyl diselenide-based polyurethanes and alkyl disulfide-based polyurethanes. The alkyl diselenide has been incorporated into polyurethane networks using a para-substituted amine diphenyl alkyl diselenide. The resulting materials not only exhibit faster self-healing properties than the corresponding disulfide-based materials, but also show the ability to be processed at temperatures as low as 60 °C.

Microstructure and wear resistance of Cuss-toughened Cr5Si3/CrSi metal silicide alloys

2005 ◽  
Vol 20 (5) ◽  
pp. 1122-1130 ◽  
Author(s):  
Y.X. Yin ◽  
H.M. Wang
Keyword(s):  
Solid Solution ◽  
Wear Resistance ◽  
Sliding Wear ◽  
Room Temperature ◽  
Wear Test ◽  
Melting Process ◽  
Dry Sliding Wear ◽  
Metal Silicide ◽  
X Ray Diffraction ◽  
X Ray

Wear-resistant Cu-based solid-solution-toughened Cr5Si3/CrSi metal silicide alloy with a microstructure consisting of predominantly the dual-phase primary dendrites with a Cr5Si3 core encapsulated by CrSi phase and a small amount of interdendritic Cu-based solid solution (Cuss) was designed and fabricated by the laser melting process using Cr–Si–Cu elemental powder blends as the precursor materials. The microstructure of the Cuss-toughened Cr5Si3/CrSi metal silicide alloy was characterized by optical microscopy, powder x-ray diffraction, and energy dispersive spectroscopy. The Cuss-toughened silicide alloys have excellent wear resistance and low coefficient of friction under room temperature dry sliding wear test conditions with hardened 0.45% C carbon steel as the sliding–mating counterpart.

Sign in / Sign up

Export Citation Format

Share Document