The effect of cement paste volume and w/c ratio on shrinkage strain, water absorption and compressive strength of high performance concrete

2017 ◽  
Vol 140 ◽  
pp. 395-402 ◽  
Author(s):  
Wojciech Piasta ◽  
Bartlomiej Zarzycki
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Cement Paste ◽  
High Performance ◽  
High Performance Concrete ◽  
Shrinkage Strain

scholarly journals Influence of Rapid Heat Treatment on the Shrinkage and Strength of High-Performance Concrete

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4102
Author(s):  
Jan Stindt ◽  
Patrick Forman ◽  
Peter Mark
Keyword(s):  
Heat Treatment ◽  
High Performance ◽  
High Performance Concrete ◽  
Treatment Time ◽  
Precast Concrete ◽  
Concrete Strength ◽  
Shrinkage Strain ◽  
Temperature Treatment ◽  
Production Flow ◽  
Steel Fibres

Resource-efficient precast concrete elements can be produced using high-performance concrete (HPC). A heat treatment accelerates hardening and thus enables early stripping. To minimise damages to the concrete structure, treatment time and temperature are regulated. This leads to temperature treatment times of more than 24 h, what seems too long for quick serial production (flow production) of HPC. To overcome this shortcoming and to accelerate production speed, the heat treatment is started here immediately after concreting. This in turn influences the shrinkage behaviour and the concrete strength. Therefore, shrinkage is investigated on prisms made from HPC with and without steel fibres, as well as on short beams with reinforcement ratios of 1.8% and 3.1%. Furthermore, the flexural and compressive strengths of the prisms are measured directly after heating and later on after 28 d. The specimens are heat-treated between 1 and 24 h at 80 °C and a relative humidity of 60%. Specimens without heating serve for reference. The results show that the shrinkage strain is pronouncedly reduced with increasing temperature duration and rebar ratio. Moreover, the compressive and flexural strength decrease with decreasing temperature duration, whereby the loss of strength can be compensated by adding steel fibres.

scholarly journals The Impact of Traffic-Induced Bridge Vibration on Rapid Repairing High-Performance Concrete for Bridge Deck Pavement Repairs

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Wei Wang ◽  
Shuo Liu ◽  
Qizhi Wang ◽  
Wei Yuan ◽  
Mingzhang Chen ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Bridge Deck ◽  
High Performance Concrete ◽  
Reduction Rate ◽  
Harmonic Vibration ◽  
Hydration Reaction ◽  
Self Healing ◽  
The Impact ◽  
Bridge Deck Pavement

Based on forced vibration tests for high-performance concrete (HPC), the influence of bridge vibration induced by traveling vehicle on compressive strength and durability of HPC has been studied. It is concluded that 1 d and 2 d compressive strength of HPC decreased significantly, and the maximum reduction rate is 9.1%, while 28 d compressive strength of HPC had a slight lower with a 3% maximal drop under the action of two simple harmonic vibrations with 2 Hz, 3 mm amplitude, and 4 Hz, 3 mm amplitude. Moreover, the vibration had a slight effect on the compressive strength of HPC when the simple harmonic vibration had 4 Hz and 1 mm amplitude; it is indicated that the amplitude exerts a more prominent influence on the earlier compressive strength with the comparison of the frequency. In addition, the impact of simple harmonic vibration on durability of HPC can be ignored; this shows the self-healing function of concrete resulting from later hydration reaction. Thus, the research achievements mentioned above can contribute to learning the laws by which bridge vibration affects the properties of concrete and provide technical support for the design and construction of the bridge deck pavement maintenance.

Influence of Lightweight Aggregate on Durability of High Performance Concrete

2009 ◽  
Vol 405-406 ◽  
pp. 197-203
Author(s):  
Bao Sheng Zhang ◽  
Li Juan Kong ◽  
Yong Ge
Keyword(s):  
Pore Structure ◽  
Cement Paste ◽  
Frost Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
Bound Water ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete

High performance concrete (HPC) with a water/cement ratio (w/c) of 0.32 and different lightweight aggregate (LWA) contents (0%, 25%, 50%, 75%, 100%) were prepared, and the influence of LWA on concrete frost-resistance and impermeability at different ages were studied, as well as the hydration degree, hydrated product, pattern and pore structure of the paste around aggregate. The results show that, by replacing normal weight aggregate (NWA) with 50% and 100% volume contents of pre-wetted LWA respectively, the chemical bound water of the cement paste surrounding aggregate are increased 12.1% and 22.7% as compared to concrete mixed without LWA. And at 28 days, lightweight aggregate concrete has the highest Ca(OH)2 content, whereas the 90-day Ca(OH)2 content of normal weight concrete is the highest. This proves that, with the increase of LWA content in concrete, both of the internal curing effect of pre-wetted LWA and secondary hydration effect of fly ash (FA) are strengthened, this can also be verified by the SEM study. Furthermore, the pore structure of the cement paste around aggregate can be improved consequently. The performance of frost-resistance of HPC can be improved by mixing LWA, the 90 day-frost-resistance of lightweight aggregate concrete is about 2.5 times of that of concrete mixed without LWA. The influence of LWA on the impermeability of HPC is different from normal concrete. When LWA content is more than 50%, the HPC impermeability decreased obviously, however at later age the difference between them becomes minor.

Study on corrosion effect of high-performance concrete under the action of sulfate and chlorine

2019 ◽  
Vol 33 (01n03) ◽  
pp. 1940054 ◽  
Author(s):  
Rongrong Yin ◽  
Jie Hu ◽  
Yu Liu ◽  
Qing Wu ◽  
Chenchen Zhang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Growth Stage ◽  
High Performance Concrete ◽  
Slow Growth ◽  
Concrete Strength ◽  
Corrosion Damage ◽  
Chloride Salt ◽  
Single Action ◽  
Two Stages

The thickness of corroded concrete layer and the compressive strength of prisms under the action of sulfate and chloride salt were investigated by ultrasonic test and compression test, respectively. The results show that under the single action of sulfate, the strength of concrete experienced two stages: a slow growth stage and a rapid descent stage. Correspondingly, under the combined action of sulfate and chloride, the concrete strength experienced another two stages: a slow growth stage and a slow degradation stage. The existence of chloride inhibited the corrosion damage of concrete in a certain extent. It was found that higher concentration of chlorine salt would lead to a stronger inhibition effect. A good consistency was observed among corrosion layer thickness, compressive strength and X-ray diffraction results. The inhabitation of chloride to the sulfate corrosion of concrete was proved.

scholarly journals Ultra-high-performance concrete with local high unburned carbon fly ash

DYNA ◽  
2021 ◽  
Vol 88 (216) ◽  
pp. 38-47
Author(s):  
Joaquín Abellán García ◽  
Nancy Torres Castellanos ◽  
Jaime Antonio Fernandez Gomez ◽  
Andres Mauricio Nuñez Lopez
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Unburned Carbon ◽  
High Tech ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Cost

Ultra-high-performance concrete (UHPC) is a kind of high-tech cementitious material with superb mechanical and durability properties compared to other types of concrete. However, due to the high content of cement and silica fume used, the cost and environmental impact of UHPC is considerably higher than conventional concrete. For this reason, several efforts around the world have been made to develop UHPC with greener and less expensive local pozzolans. This study aimed to design and produce UHPC using local fly ash available in Colombia. A numerical optimization, based on Design of Experiments (DoE) and multi-objective criteria, was performed to obtain a mixture with the proper flow and highest compressive strength, while simultaneously having the minimum content of cement. The results showed that, despite the low quality of local fly ashes in Colombia, compressive strength values of 150 MPa without any heat treatment can be achieved.

scholarly journals Optimised Mix Design for Normal Strength and High Performance Concrete Using Particle Packing Method

2011 ◽  
Vol 57 (4) ◽  
pp. 357-371 ◽  
Author(s):  
S. Gopinath ◽  
A. Ramachandra Murthy ◽  
D. Ramya ◽  
Nagesh R. Iyer
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
American Concrete Institute ◽  
Particle Packing ◽  
Mix Design ◽  
Concrete Compressive Strength ◽  
Normal Strength Concrete ◽  
Normal Strength ◽  
Packing Method

Abstract This paper presents the details of optimized mix design for normal strength and high performance concrete using particle packing method. A critical review of mix design methods have been carried out for normal strength concrete using American Concrete Institute (ACI) and Bureau of Indian Standards (BIS) methods highlighting the similarities and differences towards attaining a particular design compressive strength. Mix design for M30 and M40 grades of concrete have been carried out using ACI, BIS and particle packing methods. Optimization of concrete mix has been carried out by means of particle packing method using EMMA software, which employs modified Anderson curve to adjust the main proportions. Compressive strength is evaluated for the adjusted proportions and it is observed that the mixes designed by particle packing method estimates compressive strength closer to design compressive strength. Further, particle packing method has been employed to optimize the ingredients of high performance concrete and experiments have been carried out to check the design adequacy of the desired concrete compressive strength.

Sign in / Sign up

Export Citation Format

Share Document