Heuristic algorithm-based semi-empirical formulas for estimating the compressive strength of the normal and high performance concrete

2021 ◽  
Vol 304 ◽  
pp. 124467
Author(s):  
Ngoc-Hien Nguyen ◽  
Thuc P. Vo ◽  
Seunghye Lee ◽  
Panagiotis G. Asteris
Keyword(s):  
Compressive Strength ◽  
Heuristic Algorithm ◽  
High Performance ◽  
High Performance Concrete ◽  
Empirical Formulas ◽  
Semi Empirical

scholarly journals The Impact of Traffic-Induced Bridge Vibration on Rapid Repairing High-Performance Concrete for Bridge Deck Pavement Repairs

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Wei Wang ◽  
Shuo Liu ◽  
Qizhi Wang ◽  
Wei Yuan ◽  
Mingzhang Chen ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Bridge Deck ◽  
High Performance Concrete ◽  
Reduction Rate ◽  
Harmonic Vibration ◽  
Hydration Reaction ◽  
Self Healing ◽  
The Impact ◽  
Bridge Deck Pavement

Based on forced vibration tests for high-performance concrete (HPC), the influence of bridge vibration induced by traveling vehicle on compressive strength and durability of HPC has been studied. It is concluded that 1 d and 2 d compressive strength of HPC decreased significantly, and the maximum reduction rate is 9.1%, while 28 d compressive strength of HPC had a slight lower with a 3% maximal drop under the action of two simple harmonic vibrations with 2 Hz, 3 mm amplitude, and 4 Hz, 3 mm amplitude. Moreover, the vibration had a slight effect on the compressive strength of HPC when the simple harmonic vibration had 4 Hz and 1 mm amplitude; it is indicated that the amplitude exerts a more prominent influence on the earlier compressive strength with the comparison of the frequency. In addition, the impact of simple harmonic vibration on durability of HPC can be ignored; this shows the self-healing function of concrete resulting from later hydration reaction. Thus, the research achievements mentioned above can contribute to learning the laws by which bridge vibration affects the properties of concrete and provide technical support for the design and construction of the bridge deck pavement maintenance.

Study on corrosion effect of high-performance concrete under the action of sulfate and chlorine

2019 ◽  
Vol 33 (01n03) ◽  
pp. 1940054 ◽  
Author(s):  
Rongrong Yin ◽  
Jie Hu ◽  
Yu Liu ◽  
Qing Wu ◽  
Chenchen Zhang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
Growth Stage ◽  
High Performance Concrete ◽  
Slow Growth ◽  
Concrete Strength ◽  
Corrosion Damage ◽  
Chloride Salt ◽  
Single Action ◽  
Two Stages

The thickness of corroded concrete layer and the compressive strength of prisms under the action of sulfate and chloride salt were investigated by ultrasonic test and compression test, respectively. The results show that under the single action of sulfate, the strength of concrete experienced two stages: a slow growth stage and a rapid descent stage. Correspondingly, under the combined action of sulfate and chloride, the concrete strength experienced another two stages: a slow growth stage and a slow degradation stage. The existence of chloride inhibited the corrosion damage of concrete in a certain extent. It was found that higher concentration of chlorine salt would lead to a stronger inhibition effect. A good consistency was observed among corrosion layer thickness, compressive strength and X-ray diffraction results. The inhabitation of chloride to the sulfate corrosion of concrete was proved.

scholarly journals Ultra-high-performance concrete with local high unburned carbon fly ash

DYNA ◽  
2021 ◽  
Vol 88 (216) ◽  
pp. 38-47
Author(s):  
Joaquín Abellán García ◽  
Nancy Torres Castellanos ◽  
Jaime Antonio Fernandez Gomez ◽  
Andres Mauricio Nuñez Lopez
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Unburned Carbon ◽  
High Tech ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Cost

Ultra-high-performance concrete (UHPC) is a kind of high-tech cementitious material with superb mechanical and durability properties compared to other types of concrete. However, due to the high content of cement and silica fume used, the cost and environmental impact of UHPC is considerably higher than conventional concrete. For this reason, several efforts around the world have been made to develop UHPC with greener and less expensive local pozzolans. This study aimed to design and produce UHPC using local fly ash available in Colombia. A numerical optimization, based on Design of Experiments (DoE) and multi-objective criteria, was performed to obtain a mixture with the proper flow and highest compressive strength, while simultaneously having the minimum content of cement. The results showed that, despite the low quality of local fly ashes in Colombia, compressive strength values of 150 MPa without any heat treatment can be achieved.

A new heuristic algorithm for mix design of high-performance concrete

2012 ◽  
Vol 16 (6) ◽  
pp. 974-979 ◽  
Author(s):  
Joo-Ha Lee ◽  
Young-Soo Yoon ◽  
Joong-Hoon Kim
Keyword(s):  
Heuristic Algorithm ◽  
High Performance ◽  
High Performance Concrete ◽  
Mix Design

scholarly journals Optimised Mix Design for Normal Strength and High Performance Concrete Using Particle Packing Method

2011 ◽  
Vol 57 (4) ◽  
pp. 357-371 ◽  
Author(s):  
S. Gopinath ◽  
A. Ramachandra Murthy ◽  
D. Ramya ◽  
Nagesh R. Iyer
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
American Concrete Institute ◽  
Particle Packing ◽  
Mix Design ◽  
Concrete Compressive Strength ◽  
Normal Strength Concrete ◽  
Normal Strength ◽  
Packing Method

Abstract This paper presents the details of optimized mix design for normal strength and high performance concrete using particle packing method. A critical review of mix design methods have been carried out for normal strength concrete using American Concrete Institute (ACI) and Bureau of Indian Standards (BIS) methods highlighting the similarities and differences towards attaining a particular design compressive strength. Mix design for M30 and M40 grades of concrete have been carried out using ACI, BIS and particle packing methods. Optimization of concrete mix has been carried out by means of particle packing method using EMMA software, which employs modified Anderson curve to adjust the main proportions. Compressive strength is evaluated for the adjusted proportions and it is observed that the mixes designed by particle packing method estimates compressive strength closer to design compressive strength. Further, particle packing method has been employed to optimize the ingredients of high performance concrete and experiments have been carried out to check the design adequacy of the desired concrete compressive strength.

EXPERIMENTAL STUDY ON DURABILITY OF ROOM TEMPERATURE CURING UFC MORTAR

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Haruka Murakami ◽  
Hiromi Fujiwara ◽  
Masanori Maruoka ◽  
Takahumi Watanabe ◽  
Koji Satori
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
High Performance ◽  
Room Temperature ◽  
Bending Strength ◽  
High Performance Concrete ◽  
Drying Shrinkage ◽  
Concrete Repair ◽  
Repair Materials ◽  
Low Salt

In recent years, as structures become higher, larger, and more durable concrete whose compressive strength of the concrete is 150 N/mm 2 or more have been put to practical use. It is for this reason that it is necessary to develop strengthening materials with equal or better performance. Furthermore, the development of high-performance concrete repair materials is carried out because demand to seismic strengthening and repair increases. In this study, considering these circumstances, it was conducted an experimental study with the aim of developing a repair material using room temperature curing UFC (R-UFC). A binder composition preparation of the R-UFC has excellent fluidity under pressure. It was achieved that high-grade thixotropy, high compressive strength, and high bending strength. It can also be sprayed continuously because of its high thixtoropy. It was confirmed that the sprayed thickness was reached to 20mm by one work. Durability of this R-UFC was investigated and it was confirmed the high sulfate resistance, small drying shrinkage and low salt permeability.

Macroscopic and Microscopic Properties of High Performance Concrete with Partial Replacement of Cement by Fly Ash

2019 ◽  
Vol 292 ◽  
pp. 108-113 ◽  
Author(s):  
Josef Fládr ◽  
Petr Bílý ◽  
Roman Chylík ◽  
Zdeněk Prošek
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Partial Replacement ◽  
Experimental Program ◽  
Second Phase ◽  
Depth Of Penetration ◽  
Cement Replacement

The paper describes an experimental program focused on the research of high performance concrete with partial replacement of cement by fly ash. Four mixtures were investigated: reference mixture and mixtures with 10 %, 20 % and 30 % cement weight replaced by fly ash. In the first stage, the effect of cement replacement was observed. The second phase aimed at the influence of homogenization process for the selected 30% replacement on concrete properties. The analysis of macroscopic properties followed compressive strength, elastic modulus and depth of penetration of water under pressure. Microscopic analysis concentrated on the study of elastic modulus, porosity and mineralogical composition of cement matrix using scanning electron microscopy, spectral analysis and nanoindentation. The macroscopic results showed that the replacement of cement by fly ash notably improved compressive strength of concrete and significantly decreased the depth of penetration of water under pressure, while the improvement rate increased with increasing cement replacement (strength improved by 18 %, depth of penetration by 95 % at 30% replacement). Static elastic modulus was practically unaffected. Microscopic investigation showed impact of fly ash on both structure and phase mechanical performance of the material.

Sign in / Sign up

Export Citation Format

Share Document