Laboratory evaluation of electromagnetic density gauges for hot-mix asphalt mixture density measurement

2018 ◽  
Vol 158 ◽  
pp. 1055-1064 ◽  
Author(s):  
Zhen Leng ◽  
Zeyu Zhang ◽  
Yuan Zhang ◽  
Yangyang Wang ◽  
Huayang Yu ◽  
...  
Keyword(s):  
Hot Mix Asphalt ◽  
Asphalt Mixture ◽  
Density Measurement ◽  
Laboratory Evaluation ◽  
Mixture Density

Effects of Mixture and Aggregate Type on Over-Compaction in Hot Mix Asphalt in Tennessee

2021 ◽  
pp. 036119812110615
Author(s):  
Pawel Polaczyk ◽  
Yuetan Ma ◽  
Wei Hu ◽  
Rui Xiao ◽  
Xi Jiang ◽  
...  
Keyword(s):  
Service Life ◽  
Hot Mix Asphalt ◽  
Asphalt Mixture ◽  
Aggregate Structure ◽  
Mixture Density ◽  
Coarse Aggregates ◽  
Mastic Asphalt ◽  
Stone Mastic Asphalt ◽  
Compaction Energy ◽  
The Moment

Correct compaction is vital for asphalt mixture service life. An adequately compacted mixture with inferior properties can achieve better performance than a mixture with excellent properties but poorly compacted. This study investigated resistance to damage caused by over-compaction by utilizing the locking point concept. Over-compaction might cause damage to the aggregate structure and decrease service life. The locking point is defined as the moment during mixture compaction at which an aggregate skeleton is developed and becomes stable. Beyond the locking point, more compaction energy does not significantly increase mixture density and can damage aggregate particles. A total of 15 mixtures was utilized and evaluated using the gyratory compactor. Among them, five dense-graded plant mixtures contained different aggregates and binders, and 10 laboratory mixtures (three types: the surface, the base, and stone mastic asphalt [SMA]) were designed with the most popular coarse aggregates in Tennessee: hard limestone, soft limestone, gravel, and granite. The results of this study show that the highest locking point was reached by the mixtures containing gravel. The SMA mixtures have, on average, lower locking points than the dense-graded mixtures. Most of the dense-graded mixtures made with crushed stones failed in the range of +20 to +30 gyrations, whereas the samples made with gravels failed in the range of +30 to +40 gyrations, indicating that gravel seems to be the most resistant to damage.

Assessing Reliability and Potentiality of Nonnuclear Portable Devices for Asphalt Mixture Density Measurement

2010 ◽  
Vol 22 (9) ◽  
pp. 874-886 ◽  
Author(s):  
G. Megali ◽  
M. Cacciola ◽  
R. Ammendola ◽  
A. Moro ◽  
F. G. Praticò ◽  
...  
Keyword(s):  
Asphalt Mixture ◽  
Density Measurement ◽  
Portable Devices ◽  
Mixture Density

scholarly journals Rejuvenation Mechanism of Asphalt Mixtures Modified with Crumb Rubber

CivilEng ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 370-384
Author(s):  
Hossein Noorvand ◽  
Kamil Kaloush ◽  
Jose Medina ◽  
Shane Underwood
Keyword(s):  
Tensile Strength ◽  
Dynamic Loading ◽  
Creep Compliance ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Strength Testing ◽  
Noise Mitigation ◽  
Indirect Tensile

Asphalt aging is one of the main factors causing asphalt pavements deterioration. Previous studies reported on some aging benefits of asphalt rubber mixtures through laboratory evaluation. A field observation of various pavement sections of crumb rubber modified asphalt friction courses (ARFC) in the Phoenix, Arizona area indicated an interesting pattern of transverse/reflective cracking. These ARFC courses were placed several years ago on existing jointed plain concrete pavements for highway noise mitigation. Over the years, the shoulders had very noticeable and extensive cracking over the joints; however, the driving lanes of the pavement showed less cracking formation in severity and extent. The issue with this phenomenon is that widely adopted theories that stem from continuum mechanics of materials and layered mechanics of pavement systems cannot directly explain this phenomenon. One hypothesis could be that traffic loads continually manipulate the pavement over time, which causes some maltenes (oils and resins) compounds absorbed in the crumb rubber particles to migrate out leading to rejuvenation of the mastic in the asphalt mixture. To investigate the validity of such a hypothesis, an experimental laboratory testing was undertaken to condition samples with and without dynamic loads at high temperatures. This was followed by creep compliance and indirect tensile strength testing. The results showed the higher creep for samples aged with dynamic loading compared to those aged without loading. Higher creep compliance was attributed to higher flexibility of samples due to the rejuvenation of the maltenes. This was also supported by the higher fracture energy results obtained for samples conditioned with dynamic loading from indirect tensile strength testing.

scholarly journals Laboratory Investigation of Compaction Characteristics of Plant Recycled Hot-Mix Asphalt Mixture

2021 ◽  
Vol 13 (6) ◽  
pp. 3005
Author(s):  
Jiangang Yang ◽  
Chen Sun ◽  
Wenjie Tao ◽  
Jie Gao ◽  
Bocheng Huang ◽  
...  
Keyword(s):  
Regression Model ◽  
Hot Mix Asphalt ◽  
Orthogonal Experiment ◽  
Asphalt Mixture ◽  
Material Design ◽  
Void Content ◽  
Range Analysis ◽  
Aggregate Gradation ◽  
Compaction Characteristics ◽  
Compaction Energy

In this study, the compaction characteristics of recycled hot-mix asphalt (RHMA) were evaluated using the void content (VV), compaction energy index (CEI), slope of accumulated compaction energy (K), and lock point (LP). Then, the effects of the compaction parameters, including the gradation of the RHMA, reclaimed asphalt pavement (RAP) content, temperature of gyrations, and number of gyrations, on the compaction characteristics of RHMA were investigated. An orthogonal experiment was designed and the data collected were analyzed via range analysis; then, a regression model was generated relying on a quadratic polynomial. Furthermore, the regression model was used for the comparison and prediction of the mixture’s compactability during the material design. Finally, the compaction mechanism of RHMA was discussed from the perspective of the void content of RAP particles. The results showed that a finer aggregate gradation, a higher gyration temperature, a greater number of gyrations, and a higher RAP content were effective for increasing the compactability of RHMA. The range analysis results suggest that the gradation of RHMA has the greatest influence on compactability, followed by the RAP content. The RAP aggregate cannot diffuse to a new mixture completely, so the remained RAP particle reduces the void content of RHMA. Therefore, a higher RAP content up to 50% can help RHMA to achieve the designed void content with higher efficiency.

Performance-based mix design of unmodified and lime-modified hot mix asphalt

2012 ◽  
Vol 39 (7) ◽  
pp. 824-833 ◽  
Author(s):  
Sangyum Lee ◽  
Cheolmin Baek ◽  
Je-Jin Park
Keyword(s):  
Performance Test ◽  
Hot Mix Asphalt ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Mix Design ◽  
Direct Tension ◽  
Element Analysis ◽  
Asphalt Content ◽  
National Cooperative

This paper presents the performance evaluation of unmodified and lime-modified hot mix asphalt (HMA) mixtures at varying asphalt content using asphalt mixture performance test developed from National Cooperative Highway Research Program project 9-19 and 9-29 and the viscoelastic continuum damage finite element analysis. Test methods adopted in this study are the dynamic modulus test for stiffness, the triaxial repeated load permanent deformation test for rutting, and the direct tension test for fatigue cracking. The findings from this study support conventional understanding of the effects of asphalt content and lime modification on the fatigue cracking and rutting performance. Finally, the optimum asphalt content for both lime-modified and unmodified mixtures are proposed based on the knowledge gleaned from the performance-based mix design methodology. With additional validation and calibration, the comprehensive methodology described in this paper may serve as the foundation for a performance-based HMA mix design and performance-related HMA specifications.

scholarly journals Laboratory Evaluation of the Use of Florida Washed Shell in Open-Graded Asphalt Mixtures

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7060
Author(s):  
Mohammad Alharthai ◽  
Qing Lu ◽  
Ahmed Elnihum ◽  
Asad Elmagarhe
Keyword(s):  
Tensile Strength ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Void Content ◽  
Coarse Aggregates ◽  
Significant Difference ◽  
Indirect Tensile ◽  
Marshall Stability

This study investigates the substitution of conventional aggregate with a Florida washed shell in open-graded asphalt mixtures and evaluates the optimal substitution percentage in aggregate gradations of various nominal maximum aggregate sizes (NMASs) (i.e., 4.75, 9.5, and 12.5 mm). Laboratory experiments were performed on open-graded asphalt mixture specimens with the coarse aggregate of sizes between 2.36 and 12.5 mm being replaced by the Florida washed shell at various percentages (0, 15, 30, 45, and 100%). Specimen properties relevant to the performance of open-graded asphalt mixtures in the field were tested, evaluated, and compared. Specifically, a Marshall stability test, Cantabro test, indirect tensile strength test, air void content test, and permeability test were conducted to evaluate the strength, resistance to raveling, cracking resistance, void content, and permeability of open-graded asphalt mixtures. The results show that there is no significant difference in the Marshall stability and indirect tensile strength when the coarse aggregates are replaced with Florida washed shell. This study also found that the optimum percentages of Florida washed shell in open-graded asphalt mixture were 15, 30, and 45% for 12.5, 9.5, and 4.75 mm NMAS gradations, respectively.

scholarly journals Additive Percent Influence on “Warm Mix” Behavior

2014 ◽  
Vol 3 (1) ◽  
pp. 35-42
Author(s):  
Carmen Răcănel ◽  
Adrian Burlacu
Keyword(s):  
Sustainable Development ◽  
Working Conditions ◽  
Hot Mix Asphalt ◽  
New Technology ◽  
Asphalt Mixture ◽  
Master Curves ◽  
Stiffness Modulus ◽  
Chemical Additive ◽  
The Road ◽  
Field Compaction

Abstract The benefits of WMA technologies include reduced fuel usage and emissions in support of sustainable development, improved field compaction, which can facilitate longer haul distances and cool weather pavement, and better working conditions. Since this is a relatively new technology, it is necessary to determine the behavior and the performances of this type of asphalt mixture depending on additive percent. These technologies tend to reduce the viscosity of the asphalt and provide for the complete coating of aggregates at lower temperatures. WMA is produced at temperatures 20 to 30°C lower than typical hot-mix asphalt (HMA). The paper presents the results obtained in the Road Laboratory of Technical University of Civil Engineering Bucharest on an asphalt mixture with fibers (MASF16) prepared according to the “warm mix” technology with chemical additive. Different percent of additive are used in laboratory to draw up the “master curves” of asphalt mixture obtained by 4PB-PR stiffness modulus results.

Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture

2015 ◽  
Vol 66 ◽  
pp. 51-59 ◽  
Author(s):  
Qinglin Guo ◽  
Lili Li ◽  
Yongchun Cheng ◽  
Yubo Jiao ◽  
Chun Xu
Keyword(s):  
Glass Fiber ◽  
Asphalt Mixture ◽  
Laboratory Evaluation ◽  
Modified Asphalt
Sign in / Sign up

Export Citation Format

Share Document