The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete

2019 ◽  
Vol 197 ◽  
pp. 99-106 ◽  
Author(s):  
Xiao Huang ◽  
Shuguang Hu ◽  
Fazhou Wang ◽  
Lu Yang ◽  
Meijuan Rao ◽  
...  
Keyword(s):  
Portland Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Portland Cement Concrete ◽  
Cement Concrete

scholarly journals Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates

2021 ◽  
Author(s):  
Gilson Lomboy ◽  
Douglas Cleary ◽  
Seth Wagner ◽  
Yusef Mehta ◽  
Danielle Kennedy ◽  
...  
Keyword(s):  
Portland Cement ◽  
Cementitious Materials ◽  
Recycled Concrete ◽  
Supplementary Cementitious Materials ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Concrete Aggregates ◽  
Concrete Mixtures

Dwindling supplies of natural concrete aggregates, the cost of landfilling construction waste, and interest in sustainable design have increased the demand for recycled concrete aggregates (RCA) in new portland cement concrete mixtures. RCA repurposes waste material to provide useful ingredients for new construction applications. However, RCA can reduce the performance of the concrete. This study investigated the effectiveness of ternary blended binders, mixtures containing portland cement and two different supplementary cementitious materials, at mitigating performance losses of concrete mixtures with RCA materials. Concrete mixtures with different ternary binder combinations were batched with four recycled concrete aggregate materials. For the materials used, the study found that a blend of portland cement, Class C fly ash, and blast furnace slag produced the highest strength of ternary binder. At 50% replacement of virgin aggregates and ternary blended binder, some specimens showed comparable mechanical performance to a control mix of only portland cement as a binder and no RCA substitution. This study demonstrates that even at 50% RCA replacement, using the appropriate ternary binder can create a concrete mixture that performs similarly to a plain portland cement concrete without RCA, with the added benefit of being environmentally beneficial.

Evaluation of strength of concrete on different initial exposure condition

2020 ◽  
Vol 13 ◽  
Author(s):  
Sri Ram Krishna Mishra ◽  
Pradeep Kumar Ghosh ◽  
Manoj Kulshreshtha
Keyword(s):  
Portland Cement ◽  
High Strength ◽  
Cementitious Materials ◽  
General Purpose ◽  
Supplementary Cementitious Materials ◽  
Exposure Condition ◽  
Portland Cement Concrete ◽  
Initial Exposure ◽  
Skilled Manpower ◽  
Standard Practices

Background: The previous studies have focused curing effect of mainly on high strength concrete, where strict supervision is maintained. This study is based upon general purpose concreting work for commercial and residential construction in absence of skilled manpower and supervision. Objective: The objective of this study is to establish a thumb rule to provide 7 days initial curing for maintaining quality for unsupervised concreting irrelevant to type of cement and grading. Methods: In this study concrete samples made with locally available commercial cements were cured for various initial exposure. Results: The results shows that concrete cured after a gap of 4 days from the time of de-moulding have given lowest strength as compared to concrete cured in standard practices i.e. where proper curing protocol had been followed. Conclusion: Initial curing is most important aspect of gaining desired strength. The findings after this study shows that curing affects the strength of concrete in variable grading. Initial curing has great importance for concrete with all types of Portland cement. Concrete with supplementary cementitious materials gives lowest strength initially but results higher strength after 28 days as compared to Portland cement.

Crack Growth Resistance in Fibre Reinforced Geopolymer Concrete Exposed to Sustained Extreme Temperatures

2016 ◽  
Vol 711 ◽  
pp. 511-518 ◽  
Author(s):  
Vivek Bindiganavile ◽  
Jose R.A. Goncalves ◽  
Yaman Boluk
Keyword(s):  
Portland Cement ◽  
Crack Growth ◽  
Volume Fraction ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Geopolymer Concrete ◽  
Extreme Temperatures ◽  
Portland Cement Concrete ◽  
Promising Alternative ◽  
Cement Binder

Portland cement concrete (PCC) is now second only to potable water in per capita consumption. And notwithstanding its numerous benefits, Portland cement itself is responsible for between 4 to 5% of the world’s manmade greenhouse gas emissions. In this context, geopolymer concrete is a promising alternative, wherein the Portland cement binder is replaced entirely by supplementary cementitious materials triggered by alkaline activators. Relatively little is known on the fracture response of this system, especially when exposed to extreme temperatures. The study reported here focused on the crack growth response of such a system prepared with Class F fly ash and reinforced with steel and polymeric fibres up to 1% volume fraction. The geopolymerization was effected with a blend of sodium hydroxide and sodium silicate to achieve a compressive strength of 30 MPa at 28 days. The resulting geopolymer concrete was subjected to temperatures between-30 oC to 300 oC, sustained for 2 hours. A fibre blend of steel to polypropylene in the mass ratio of 4:1 was incorporated. Based on the results, four different stages for fracture behaviour were identified with superior fibre efficiency seen at sub-zero temperatures.

scholarly journals Utilization of Iraqi Metakaolin in Special Types of Concrete: A Review Based on National Researches

2021 ◽  
Vol 27 (8) ◽  
pp. 80-98
Author(s):  
Mahmood Fawzi Ahmed
Keyword(s):  
Construction Material ◽  
Cementitious Materials ◽  
Pozzolanic Reaction ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Concrete Technology ◽  
Natural Pozzolans ◽  
Sustainability Issue

Portland cement concrete is the most commonly used construction material in the world for decades. However, the searches in concrete technology are remaining growing to meet particular properties related to its strength, durability, and sustainability issue. Thus, several types of concrete have been developed to enhance concrete performance. Most of the modern concrete types have to contain supplementary cementitious materials (SCMs) as a partial replacement of cement. These materials are either by-products of waste such as fly ash, slag, rice husk ash, and silica fume or from a geological resource like natural pozzolans and metakaolin (MK). Ideally, the utilization of SCMs will enhance the concrete performance, minimize environmental pollution and mitigate the drawbacks of cement production attributed to the highly CO2 emission. In general, MK's ultra-fineness and high pozzolanic activity are exhibited a remarkable performance of concrete in terms of strength and durability. However, the filler effect, acceleration of cement hydration, and the pozzolanic reaction with calcium hydroxide (CH) are the main factors influencing the performance of metakaolin as a cementitious material. Therefore, numerous researches have been undertaken on inclusion MK in concrete and mortar and production of (free-cement concrete) geopolymer concrete. This paper reviews some of previous native researches on effect of using Iraqi metakaolin as a pozzolanic material in different types of concrete. The standpoint of this review will guide the researchers on the importance of utilization of local MK and highlight the missing researches toward completing a comprehensive understanding of incorporation Iraqi-metakaolin in concrete technology.

Strength Studies of High Performance Concrete with Fly-Ash and Gangue

2012 ◽  
Vol 446-449 ◽  
pp. 3544-3553
Author(s):  
Yun Fang Meng ◽  
Ya Yun Tan ◽  
Rui Li
Keyword(s):  
Fly Ash ◽  
Portland Cement ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Supplementary Cementitious Materials ◽  
Optimum Level ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
And Performance

The main purpose of this research was to enhance the strength and durability of concrete in both design and construction of high performance concrete. Particularly, the strength in high performance concrete is achieved by optimising the gangue, fly ash and silica fume replacement for cement. The gangue has been used as a cementitious material. Using data from tests on laboratory studies, comparisons are made of the properties and performance of the gangue, fly ash and silica fume concrete with conventional Portland cement concrete of similar and same mixture proportions. The many technical benefits available to high performance concrete user, such as reduced heat evolution, lower permeability and higher strength at later ages, at the same time, in order to increase resistance to sulphate attack and alkali silica reaction. A number of recommendations are given for the effective use of gangue and fly ash in high performance concrete. The results show that 10% gangue, 15% slag, 15% fly ash, 10% silica fume of replacement was found to be an optimum level and demonstrated excellent performance in strength. Literature review on the use of different supplementary cementitious materials in concrete to enhance strength was also reported. The paper is intended to provide guidance for those concerned with the design, application and performance of high properties concrete in practice where gangue and fly ash can also help to reduce costs and energy demands in the production of concrete compared with conventional Portland cement concrete.

Development of a Capacitor Probe to Detect Subsurface Deterioration in Concrete

1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi
Keyword(s):  
Dielectric Constant ◽  
Portland Cement ◽  
Electromagnetic Waves ◽  
Low Cost ◽  
Complex Dielectric Constant ◽  
Life Cycle Costs ◽  
Parallel Plates ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Set Up

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals A Review of the Mechanical Properties and Durability of Ecological Concretes in a Cold Climate in Comparison to Standard Ordinary Portland Cement-Based Concrete

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3467
Author(s):  
Ankit Kothari ◽  
Karin Habermehl-Cwirzen ◽  
Hans Hedlund ◽  
Andrzej Cwirzen
Keyword(s):  
Carbon Dioxide ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cementitious Materials ◽  
Cold Climate ◽  
Supplementary Cementitious Materials ◽  
Short Exposure ◽  
Chemical Admixtures ◽  
Composite Cements ◽  
Alkali Activated

Most of the currently used concretes are based on ordinary Portland cement (OPC) which results in a high carbon dioxide footprint and thus has a negative environmental impact. Replacing OPCs, partially or fully by ecological binders, i.e., supplementary cementitious materials (SCMs) or alternative binders, aims to decrease the carbon dioxide footprint. Both solutions introduced a number of technological problems, including their performance, when exposed to low, subfreezing temperatures during casting operations and the hardening stage. This review indicates that the present knowledge enables the production of OPC-based concretes at temperatures as low as −10 °C, without the need of any additional measures such as, e.g., heating. Conversely, composite cements containing SCMs or alkali-activated binders (AACs) showed mixed performances, ranging from inferior to superior in comparison with OPC. Most concretes based on composite cements require pre/post heat curing or only a short exposure to sub-zero temperatures. At the same time, certain alkali-activated systems performed very well even at −20 °C without the need for additional curing. Chemical admixtures developed for OPC do not always perform well in other binder systems. This review showed that there is only a limited knowledge on how chemical admixtures work in ecological concretes at low temperatures and how to accelerate the hydration rate of composite cements containing high amounts of SCMs or AACs, when these are cured at subfreezing temperatures.

Sign in / Sign up

Export Citation Format

Share Document