Combustion properties and road performance of asphalt mixtures containing alumina trihydrate/organic montmorillonite composites

2022 ◽  
Vol 317 ◽  
pp. 125981
Author(s):  
Xiaolong Yang ◽  
Aiqin Shen ◽  
Guiyong Liu ◽  
Hongliu Rong ◽  
Yongjun Meng ◽  
...  
Keyword(s):  
Asphalt Mixtures ◽  
Organic Montmorillonite ◽  
Combustion Properties ◽  
Road Performance ◽  
Alumina Trihydrate

scholarly journals Microwave Absorption Ability of Steel Slag and Road Performance of Asphalt Mixtures Incorporating Steel Slag

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 663 ◽  
Author(s):  
Baowen Lou ◽  
Zhuangzhuang Liu ◽  
Aimin Sha ◽  
Meng Jia ◽  
Yupeng Li
Keyword(s):  
Microwave Absorption ◽  
Steel Slag ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Microwave Absorber ◽  
Self Healing ◽  
High Temperature Stability ◽  
Road Performance ◽  
On The Road

Excessive usage of non-renewable natural resources and massive construction wastes put pressure on the environment. Steel slags, the main waste material from the metal industry, are normally added in asphalt concrete to replace traditional aggregate. In addition, as a typical microwave absorber, steel slag has the potential to transfer microwave energy into heat, thus increasing the limited self-healing ability of asphalt mixture. This paper aims to investigate the microwave absorption potentials of steel slag and the effect of its addition on road performance. The magnetic parameters obtained from a microwave vector network analyzer were used to estimate the potential use of steel slag as microwave absorber to heal cracks. Meanwhile, the initial self-healing temperature was further discussed according to the frequency sweeping results. The obvious porous structure of steel slag observed using scanning electron microscopy (SEM) had important impacts on the road performance of asphalt mixtures. Steel slag presented a worse effect on low-temperature crack resistance and water stability, while high-temperature stability can be remarkably enhanced when the substitution of steel slag was 60% by volume with the particle size of 4.75–9.5 mm. Overall, the sustainability of asphalt mixtures incorporating steel slag can be promoted due to its excellent mechanical and microwave absorption properties.

Research on the Road Performance of the AC-25 Asphalt Mixtures

2012 ◽  
Vol 204-208 ◽  
pp. 1593-1598
Author(s):  
Hong Mei Li ◽  
Wen Fang Liu
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Central Layer ◽  
The Road ◽  
Road Performance ◽  
On The Road

In this paper, firstly, based on asphalt pavement central layer, the comparison with the foreign related gradation of asphalt mixtures, one typical kinds of gradations are decided; Secondly, the asphalt aggregate ratio is predicted based on professor Lin’s Theory , and five asphalt aggregate ratio are selected. Finally, the road performance of asphalt mixture is experimented, and the road performance of five asphalt aggregate ratio is analyzed. As a result, we can predict the range of the optimum asphalt aggregate ratio based on the road performance.

Experimental Research on Road Performance of Natural Asphalt Modified Asphalt Mixtures

2011 ◽  
Vol 287-290 ◽  
pp. 762-766
Author(s):  
Liang Fan ◽  
Xiao Jin Song ◽  
Yu Zhen Zhang
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Cost Effective ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Pavement Performance ◽  
Modified Asphalt ◽  
Modification Technique ◽  
Road Performance ◽  
Natural Asphalt

This report mainly evaluated the pavement performance of natural asphalt from Albania. Firstly, base asphalts were processed with natural asphalt by “wet method” modification technique to obtain modified asphalt; and mixture are produced with these modified asphalt binders, and then high temperature performance and moisture stability properties are evaluated by some standard methods. Analysis shows that this natural asphalt can remarkably improve the high temperature and moisture stabilities of asphalt mixture, and own cost-effective advantage.

scholarly journals Morphological Discrepancy of Various Basic Oxygen Furnace Steel Slags and Road Performance of Corresponding Asphalt Mixtures

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2322 ◽  
Author(s):  
Yong Ye ◽  
Shaopeng Wu ◽  
Chao Li ◽  
Dezhi Kong ◽  
Benan Shu
Keyword(s):  
Steel Slag ◽  
Asphalt Mixture ◽  
Basic Oxygen Furnace ◽  
Asphalt Mixtures ◽  
Basic Oxygen ◽  
The Road ◽  
Treatment Processes ◽  
Road Performance ◽  
The Difference ◽  
The Stability

Due to the difference of cooling and treatment processes (rolling method, hot braised method, layer pouring method), basic oxygen furnace (BOF) steel slag can be mainly classified as roller steel slag (RSS), hot braised steel slag (HBSS) and layer pouring steel slag (LPSS). Treatment difference directly results in the performance variations of different BOF steel slag and corresponding asphalt mixtures. The primary purpose of this research was to examine the effects of different cooling and treatment processes on the morphological discrepancy of different BOF steel slag. Also, the road performances of corresponding asphalt mixtures, and mechanism between steel slag performance and road performance were studied. The results show that LPSS owns the largest variability of angular index and texture index, and RSS has the most balanced morphological parameters. The structure of RSS asphalt mixture is advantageous for improving the ability of the asphalt mixture to resist the deformation and enhancing the stability of structure. Higher content of CaO and lower content of SiO2 make the acid-base reaction of RSS asphalt mixture most intense, which contribute to the best road performance of it.

scholarly journals Synthesis and Effect of Encapsulating Rejuvenator Fiber on the Performance of Asphalt Mixture

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1266 ◽  
Author(s):  
Benan Shu ◽  
Shiwen Bao ◽  
Shaopeng Wu ◽  
Lijie Dong ◽  
Chao Li ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
The Self ◽  
Self Healing ◽  
Excellent Thermal Stability ◽  
The Road ◽  
Water Sensitivity ◽  
Road Performance ◽  
Temperature Water

The idea of prolonging the service life of asphalt mixture by improving the self-healing ability of asphalt has received extensive attention in recent years. In view of this, this work synthesized three kinds of encapsulating rejuvenator fibers to improve self-healing properties of asphalt mixtures. A series of characterizations were performed to study the morphology, chemical structure and thermal stability of the three kinds of fibers. Subsequently, the road performance of asphalt mixture containing the fiber were investigated, which included high and low temperature, water sensitivity and fatigue performances. Finally, the self-healing performance of asphalt mixture containing the fiber was investigated by 3PB test. The results revealed that the three kinds of encapsulating rejuvenator fibers were successfully synthesized. The fibers had excellent thermal stability, which met temperature requirements in the mixing and compaction process of asphalt mixtures. Road performance of asphalt mixture containing the fiber met the requirements. Self-healing ability of asphalt mixture containing the fiber was improved. Synergistic action of temperature and rejuvenator could further significantly improve the self-healing ability of the asphalt mixture.

Flame-retarding effects and combustion properties of asphalt binder blended with organo montmorillonite and alumina trihydrate

2014 ◽  
Vol 72 ◽  
pp. 41-47 ◽  
Author(s):  
Jianzhong Pei ◽  
Yong Wen ◽  
Yanwei Li ◽  
Xin Shi ◽  
Jiupeng Zhang ◽  
...  
Keyword(s):  
Asphalt Binder ◽  
Combustion Properties ◽  
Alumina Trihydrate

Effect of Different Media Aqueous Solution on Road Performance of Asphalt Mixtures

2018 ◽  
Vol 913 ◽  
pp. 1070-1075 ◽  
Author(s):  
Xue Mei Zhang ◽  
Ling Pang ◽  
Shao Peng Wu ◽  
Guo Fu Zhang
Keyword(s):  
Aqueous Solution ◽  
Tensile Strength ◽  
Low Temperature ◽  
Salt Solution ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
Freeze Thaw ◽  
The Road ◽  
Road Performance ◽  
Sbs Modified Asphalt

Servicing in the natural environment, asphalt pavement is often exposed to the various aqueous solution, however, the effect of different media aqueous solution on road performance of asphalt mixtures remains ambiguous. In this study, the influences of water, acid, alkali and salt solution on volume of air voids (VV), tensile strength rate (TSR), low temperature performance of 70# asphalt mixtures and SBS modified asphalt mixtures were investigated through freeze-thaw cycles test, void ratio test, Lottman test and Three-point Bending Fracture (TBF) test. The results indicated that freeze–thaw cycles influenced the road performance of asphalt mixtures significantly, increased the air void of asphalt mixtures, and reduced tensile strength ratio and failure strain of asphalt mixtures. Compared with the distilled water, the damage of acid, alkali and salt solution on the road performances of asphalt mixtures were more serious, especially alkali solution to tensile strength rate and failure strains in low temperature, and salt solution to VV. The moisture corrosion resistance of SBS modified asphalt mixtures is better than that of 70# asphalt mixtures.

Sign in / Sign up

Export Citation Format

Share Document