Origin and distribution of calcite concretions in Cretaceous Wall Creek Member, Wyoming: Reservoir-quality implication for shallow-marine deltaic strata

2014 ◽  
Vol 48 ◽  
pp. 139-152 ◽  
Author(s):  
Stephanie L. Nyman ◽  
M. Royhan Gani ◽  
Janok P. Bhattacharya ◽  
Keumsuk Lee
Geosciences ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 446
Author(s):  
Dinfa Vincent Barshep ◽  
Richard Henry Worden

The Upper Jurassic, shallow marine Corallian sandstones of the Weald Basin, UK, are significant onshore reservoirs due to their future potential for carbon capture and storage (CCS) and hydrogen storage. These reservoir rocks, buried to no deeper than 1700 m before uplift to 850 to 900 m at the present time, also provide an opportunity to study the pivotal role of shallow marine sandstone eodiagenesis. With little evidence of compaction, these rocks show low to moderate porosity for their relatively shallow burial depths. Their porosity ranges from 0.8 to 30% with an average of 12.6% and permeability range from 0.01 to 887 mD with an average of 31 mD. The Corallian sandstones of the Weald Basin are relatively poorly studied; consequently, there is a paucity of data on their reservoir quality which limits any ability to predict porosity and permeability away from wells. This study presents a potential first in the examination of diagenetic controls of reservoir quality of the Corallian sandstones, of the Weald Basin’s Palmers Wood and Bletchingley oil fields, using a combination of core analysis, sedimentary core logs, petrography, wireline analysis, SEM-EDS analysis and geochemical analysis to understand the extent of diagenetic evolution of the sandstones and its effects on reservoir quality. The analyses show a dominant quartz arenite lithology with minor feldspars, bioclasts, Fe-ooids and extra-basinal lithic grains. We conclude that little compactional porosity-loss occurred with cementation being the main process that caused porosity-loss. Early calcite cement, from neomorphism of contemporaneously deposited bioclasts, represents the majority of the early cement, which subsequently prevented mechanical compaction. Calcite cement is also interpreted to have formed during burial from decarboxylation-derived CO2 during source rock maturation. Other cements include the Fe-clay berthierine, apatite, pyrite, dolomite, siderite, quartz, illite and kaolinite. Reservoir quality in the Corallian sandstones show no significant depositional textural controls; it was reduced by dominant calcite cementation, locally preserved by berthierine grain coats that inhibited quartz cement and enhanced by detrital grain dissolution as well as cement dissolution. Reservoir quality in the Corallian sandstones can therefore be predicted by considering abundance of calcite cement from bioclasts, organically derived CO2 and Fe-clay coats.


Water ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2972
Author(s):  
Umar Ashraf ◽  
Hucai Zhang ◽  
Aqsa Anees ◽  
Muhammad Ali ◽  
Xiaonan Zhang ◽  
...  

The precise characterization of reservoir parameters is vital for future development and prospect evaluation of oil and gas fields. C-sand and B-sand intervals of the Lower Goru Formation (LGF) within the Lower Indus Basin (LIB) are proven reservoirs. Conventional seismic amplitude interpretation fails to delineate the heterogeneity of the sand-shale facies distribution due to limited seismic resolution in the Sawan gas field (SGF). The high heterogeneity and low resolution make it challenging to characterize the reservoir thickness, reservoir porosity, and the factors controlling the heterogeneity. Constrained sparse spike inversion (CSSI) is employed using 3D seismic and well log data to characterize and discriminate the lithofacies, impedance, porosity, and thickness (sand-ratio) of the C- and B-sand intervals of the LGF. The achieved results disclose that the CSSI delineated the extent of lithofacies, heterogeneity, and precise characterization of reservoir parameters within the zone of interest (ZOI). The sand facies of C- and B-sand intervals are characterized by low acoustic impedance (AI) values (8 × 106 kg/m2s to 1 × 107 kg/m2s), maximum sand-ratio (0.6 to 0.9), and maximum porosity (10% to 24%). The primary reservoir (C-sand) has an excellent ability to produce the maximum yield of gas due to low AI (8 × 106 kg/m2s), maximum reservoir thickness (0.9), and porosity (24%). However, the secondary reservoir (B-sand) also has a good capacity for gas production due to low AI (1 × 107 kg/m2s), decent sand-ratio (0.6), and average porosity (14%), if properly evaluated. The time-slices of porosity and sand-ratio maps have revealed the location of low-impedance, maximum porosity, and maximum sand-ratio that can be exploited for future drillings. Rock physics analysis using AI through inverse and direct relationships successfully discriminated against the heterogeneity between the sand facies and shale facies. In the corollary, we proposed that pre-conditioning through comprehensive petrophysical, inversion, and rock physics analysis are imperative tools to calibrate the factors controlling the reservoir heterogeneity and for better reservoir quality measurement in the fluvial shallow-marine deltaic basins.


1991 ◽  
Vol 14 (1) ◽  
pp. 279-285
Author(s):  
D. A. Stevens ◽  
R. J. Wallis

AbstractThe Clyde Field, which was discovered in 1978, is located on the SW edge of the North Sea Central Graben. The reservoir is developed with Late Jurassic shallow marine sands of the Fulmar Sand Formation. An estimated 408 MMBBL of oil is present (Annex B), of which 154 MMBBL is considered recoverable.The structure of the Clyde Field takes the form of a rotated Jurassic fault block, truncated at its crest by a major unconformity. Oil is retained within a combination trap, sourced from Late Jurassic Kimmeridge Clay thermally matured in the highly productive basinal lows, adjacent to the field.Reservoir sand quality is highly variable, ranging from excellent with permeabilities in excess of Id, to poor with permeabilities of less than 1 md. The principal control on reservoir quality appears to be original depositional texture, although strong diagenetic effects are also present.Production is from a single, centrally located, platform provided with thirty slots. Aquifer support is insufficient to maintain reservoir pressure at the current plateau production rate of 50 000 BOPD and so a programme of water injection has been implemented.


Sign in / Sign up

Export Citation Format

Share Document