Stratigraphic Trap Potential in the Lower Cretaceous Ratawi Interval, Partitioned Zone PZ, Saudi Arabia and Kuwait

The Lower Cretaceous Ratawi Oolite Formation is among the most prolific reservoirs in the PZ, having produced a significant amount of oil since the 1950's. The Ratawi is interpreted as a low angle carbonate ramp, with high-energy grainstone facies developing on structural highs. Production is focused on these structural highs, with very few well penetrations off structure. Recent work has identified potential Ratawi stratigraphic traps in prograding clinoforms along the flanks of the North Fuwaris structural high. Core data from Ratawi wells illustrate the interplay of depositional environment and diagenesis on reservoir quality. Gross depositional environment (GDE) maps created from the integration of seismic facies and core observations indicate the stratigraphic trap lies in the ramp slope. Reservoir quality variability of the ramp slope across the PZ is explained by the diagenetic history of the Ratawi. Early equant calcite cement develops from substantial meteoric runoff and lowers porosity, while later dissolution enhances reservoir quality. The area of interest is isolated from potential meteoric inputs; we do not expect equant calcite cement or the associated reduction in reservoir quality. Seismic interpretation was performed on recently acquired PZ 3D data to map the Ratawi section. Clinoforms (inclined geometry) were mapped along the western flank of the North Fuwaris high. These facies appear to have developed as a result of progradation to the NW and are indicative of good reservoir development. Leads were generated using the depth structure and GDE maps, supported by amplitude extraction and seismic inversion volumes. Amplitudes extracted from the clinoform shows that the strongest anomaly is along the structurally highest part of the horizon and the anomaly weakens downdip. High amplitudes could be a proxy for reservoir (porosity), and sharp turn-off in amplitude might indicate that lateral and updip facies changes to non-reservoir which is needed for an effective seal. Recent seismic inversion performed on the Ratawi interval shows a good match between the Acoustic Impedance (AI) from logs and the computed AI from the seismic. The Ratawi Oolite appears as a low impedance interval between overlying Ratawi Limestone and underlying Makhul. Porosity estimated from AI volumes appear to support possible Ratawi reservoir development along the flanks of North Fuwaris and Wafra highs.

Reservoir Quality of Upper Jurassic Corallian Sandstones, Weald Basin, UK

The Upper Jurassic, shallow marine Corallian sandstones of the Weald Basin, UK, are significant onshore reservoirs due to their future potential for carbon capture and storage (CCS) and hydrogen storage. These reservoir rocks, buried to no deeper than 1700 m before uplift to 850 to 900 m at the present time, also provide an opportunity to study the pivotal role of shallow marine sandstone eodiagenesis. With little evidence of compaction, these rocks show low to moderate porosity for their relatively shallow burial depths. Their porosity ranges from 0.8 to 30% with an average of 12.6% and permeability range from 0.01 to 887 mD with an average of 31 mD. The Corallian sandstones of the Weald Basin are relatively poorly studied; consequently, there is a paucity of data on their reservoir quality which limits any ability to predict porosity and permeability away from wells. This study presents a potential first in the examination of diagenetic controls of reservoir quality of the Corallian sandstones, of the Weald Basin’s Palmers Wood and Bletchingley oil fields, using a combination of core analysis, sedimentary core logs, petrography, wireline analysis, SEM-EDS analysis and geochemical analysis to understand the extent of diagenetic evolution of the sandstones and its effects on reservoir quality. The analyses show a dominant quartz arenite lithology with minor feldspars, bioclasts, Fe-ooids and extra-basinal lithic grains. We conclude that little compactional porosity-loss occurred with cementation being the main process that caused porosity-loss. Early calcite cement, from neomorphism of contemporaneously deposited bioclasts, represents the majority of the early cement, which subsequently prevented mechanical compaction. Calcite cement is also interpreted to have formed during burial from decarboxylation-derived CO2 during source rock maturation. Other cements include the Fe-clay berthierine, apatite, pyrite, dolomite, siderite, quartz, illite and kaolinite. Reservoir quality in the Corallian sandstones show no significant depositional textural controls; it was reduced by dominant calcite cementation, locally preserved by berthierine grain coats that inhibited quartz cement and enhanced by detrital grain dissolution as well as cement dissolution. Reservoir quality in the Corallian sandstones can therefore be predicted by considering abundance of calcite cement from bioclasts, organically derived CO2 and Fe-clay coats.

Fluid Histories of Middle Ordovician fault–fracture hydrothermal dolomite oil fields in the southern Michigan Basin, U.S.A.

ABSTRACT Dolomitized fault–fracture structures in the Trenton and Black River formations (TBR) are the type example for “hydrothermal” petroleum reservoirs world-wide. However, fluid histories of these structures are only partially understood. Trenton and Black River reservoirs in the southern Michigan Basin are composed of fault-associated, vertical dolomite bodies that are highly fractured and brecciated. Open spaces are partially to completely filled by saddle dolomite and less frequently by calcite cement. Cathodoluminescence microstratigraphies of void-filling carbonate cements are not correlatable between oil fields. Fluid inclusion homogenization temperatures (Th) measured in carbonate cements indicate two fluid endmembers: a warm fluid (∼ 80° to 180° C) and a hot fluid (180° to ∼ 260° C). Increasing Th proximal to the underlying Proterozoic Mid-Michigan Rift (MMR) suggest that the hot fluids emanated from the rift area. Included fluids are saline (16.1–49.4 wt. % NaCl equivalent), and salinity likely is sourced from overlying Silurian Salina Group evaporites. First melting temperatures (Tfm), interpreted as eutectic temperatures (Te), of fluids range from –112° C to –50° C, indicating a complex Na–Ca–KCl brine; the expected composition of dissolved Salina salts. Lower Te proximal to the MMR suggest the rift as a source of additional complexing ions. C and O isotope values for carbonate cements are depleted with respect to δ18O (–6.59 to –12.46‰ VPDB) relative to Ordovician seawaters, and somewhat depleted with respect to δ13C (–1.22 to +1.18‰ VPDB). Equilibrium calculations from δ18O and Th values indicate that cement precipitating waters were highly evolved (+1.3 to +14.4‰ δ18O‰ VSMOW) compared to Ordovician and Silurian seawaters (–5.5‰ δ18O‰ VSMOW). Strontium isotope values indicate two fluid sources: Proterozoic basement and Late Silurian evaporites. Values of 87Sr/86Sr for cements in the Freedom, Napoleon, Reading, and Scipio fields (0.7086–0.7088) are influenced by warm water sourced from Silurian strata, and values for cements in the Albion, Branch County, and Northville fields (0.7091–0.7110) record continental basement signatures. Cement precipitating fluids in TBR oil fields likely have similar sources and timing. However, water–rock interactions along fault pathways modified source waters, giving each oil field a unique petrographic and geochemical signature. Fluid movement in TBR oil fields likely were initiated by reactivation of basement faulting during Silurian–Devonian tectonism.

Micro-scale dissolution seams mobilise carbon in deep-sea limestones

Measuring the amount of carbon captured in deep-sea limestones is fundamental to understanding the long-term carbon cycle because pelagic limestones represent Earth’s largest carbon sink since the mid-Mesozoic. However, their contribution to the long-term carbon cycle is poorly quantified. Here, we use X-ray fluorescence and scanning X-ray diffraction microscopy for high-resolution chemical and structural analysis of pelagic limestone from the Paleocene Kaiwhata Formation in New Zealand. We identify densely packed diagenetic micro-dissolution seams that are invisible to light and electron-beam microscopes in most cases. Mass-balance calculations indicate that individual seams remove ~50% of the calcite mud matrix while their bulk-sample carbon loss adds up to ~10%. The liberated carbon is trapped in situ as calcite cement or returned to the ocean during physical compaction or soft-sediment deformation. We suggest micro-dissolution structures may play an important role in the long-term carbon cycle by modulating carbon exchange between the geosphere and hydrosphere.

Regional stratigraphy and proximal to distal variation of lithology and porosity within a mixed carbonate-siliciclastic system, Mississippian strata of northern and central Oklahoma

Mississippian carbonate and silica-rich reservoirs of northern and central Oklahoma formed along a regionally extensive carbonate ramp to basin transect. The stratigraphy, lithology, and porosity characteristics of the Mississippian Meramec and Osage series vary significantly as older ramp carbonates prograde southward and transition into younger calcareous and quartz-rich silt deposits of the Anadarko Basin. Lithofacies identified within the northern carbonate-dominated portion of the system commonly include altered chert, skeletal grainstones, peloidal packstones-grainstones, bioturbated wackestones-packstones, bioturbated mudstones-wackestones, glauconitic sandstones, and siliceous shale. Lithofacies within the southern siliciclastic-dominated portion of the system include structureless to bioturbated sandstones, siltstones, and laminated mudstones, each with varying degrees of carbonate content. We group these core-based lithofacies into dominant lithologies/rock types which tie to well-log properties. Electrofacies classification methods including Artificial-Neural Network (ANN) and k-means clustering predict lithologies in non-cored wells. ANNs yielded the highest overall prediction accuracy of 85% for lithologies. Core, well log, and lithology log data establish the regional stratigraphic framework. In this study, the Mississippian interval of interest subdivides into sixteen stratigraphic zones. A depositional-dip oriented cross section and associated reservoir models illustrate both proximal to distal and stratigraphic variability of lithology and porosity. Lithology trends moving from north to south, from older to younger strata, reveal a carbonate-dominated succession capped by diagenetically altered chert northward shifting into a siliciclastic-dominated interval, which increases in clay content southward. Northward, prospective conventional reservoirs developed near cycle tops within diagenetically replaced cherts and cherty limestones associated with subaerial exposure and sea-level fluctuations. Southward, higher total porosity associates with increased clay content linked to the suppression of calcite cement, forming prospective unconventional targets near the bases of depositional cycles.

Origin of Drusy Dolomite Cement in Permo-Triassic Dolostones, Northern United Arab Emirates

While the characteristics and origin of drusy calcite cement in carbonate deposits is well constrained in the literature, little attention is paid to drusy dolomite cement. Petrographic observations, stable isotopes, and fluid-inclusion microthermometry suggest that drusy dolomite cement in Permo-Triassic conglomerate/breccia dolostone beds in northern United Arab Emirates has precipitated as cement and not by dolomitization of drusy calcite cement. The low 18OVPDB (−9.4‰ to −6.2‰) and high homogenization temperatures of fluid inclusions in drusy dolomite (Th = 73–233 °C) suggest that dolomitization was caused by hot basinal brines (salinity = 23.4 wt% NaCl eq.). The 13CVPDB values (+0.18‰ to +1.6‰) and 87Sr/86Sr ratio (0.708106 to 0.708147) indicate that carbon and strontium were derived from the host marine Permo-Triassic carbonates. Following this dolomitization event, blocky calcite (Th = 148 °C; salinity = 20.8 wt% NaCl eq.) precipitated from the hot basinal brines. Unravelling the origin of drusy dolomite cement has important implications for accurate construction of paragenetic sequences in carbonate rocks and decipher the origin and chemistry of diagenetic waters in sedimentary basins.

Differentiating early from later diagenesis in a Cretaceous sandstone and petroleum reservoir of the Cedar Mountain Formation, Utah

ABSTRACT Previously published anomalous whole-rock stable isotopic values from the Poison Strip Sandstone Member of the Cretaceous Cedar Mountain Formation (CMF) of eastern Utah are of uncertain origins. This study investigated the diagenetic history and the processes responsible for these anomalous data. Accordingly, we integrated photomicroscopic techniques including polarized light microscopy, epifluorescence and cathodoluminescence (CL) imaging, micromilling of stable isotope samples, and fluid-inclusion heating and freezing measurements to this end. The key observations involved the microscopic mapping of calcite cement stratigraphy using CL imaging to permit the analysis of stable isotopes of calcite cements that crystallized during early and late diagenesis. The mapping of calcite cement zones of sufficient submillimeter size to mill out and isolate microgram-sized stable isotope samples enabled this discrimination. Early diagenetic calcite cements have the most positive δ18O values (-10 to -8.5‰ Vienna Pee Dee Belemnite [VPDB]) of all components. The pattern of δ13C and δ18O variation in this early diagenetic cement indicates affinities with early meteoric diagenesis previously documented in published literature on the CFM. The late diagenetic calcite cements yield the most negative δ18O values (-18 to -16‰ VPDB). We interpret the late diagenetic cements to be responsible for the anomalously low whole-rock δ18O values previously reported from the Poison Strip Sandstone Member. Our discoveries of bitumen in late-stage pore fillings and liquid petroleum in the fluid inclusions of late diagenetic calcite cements of the Poison Strip Sandstone Member explain the lower whole-rock organic matter δ13C values and anomalous Δ13C values reported from the unit. Comparatively lower carbonate δ18O and organic δ13C values originally derived from whole-rock analyses of samples from the Poison Strip Sandstone Member resulted from high-temperature basinal diagenesis (hydrothermal circulation and/or petroleum migration), rather than the alternative interpretation of early diagenesis related to a Cretaceous paleoclimatic perturbation. Our results are illustrative of methods to resolve the long-standing geologic problem of discriminating and characterizing products of early vs. late diagenesis in terrigenous clastic sedimentary strata.

Stratigraphic variability of Mississippian Meramec chemofacies and petrophysical properties using Machine Learning and geostatistical modeling,STACK trend, Anadarko Basin, Oklahoma

Mississippian Meramec deposits and reservoirs in the Sooner Trend in the Anadarko (Basin) in Canadian and Kingfisher counties (STACK) play of central Oklahoma are comprised of silty limestones, calcareous sandstones, argillaceous-calcareous siltstones, argillaceous siltstones, and mudstones. We have used core-derived X-ray fluorescence (XRF) data and established environmental proxies to evaluate the occurrence of specific elements (Al, K, Ti, Zr, Sr, Ca, and Si) and to illustrate their stratigraphic variability. For the Mississippian Meramec, six indicator elements or element ratios serve as proxies for clay (Al and K), detrital sediment (Ti and Zr), carbonate deposits (Sr and Ca), calcite cement (Sr/Ca), and biogenic and continentally derived quartz (Si/Ti and Si/Al). We used an unsupervised K-means classification to cluster elemental data from which we interpret three chemofacies: (1) calcareous sandstone, (2) argillaceous-calcareous siltstone, and (3) detrital mudstone. We used a random forest approach to relate core-derived chemofacies to well logs and classify chemofacies in noncored wells with an accuracy of up to 83% based on blind test results. We integrated core-derived XRF, conventional well logs, and chemofacies logs to produce a dip-oriented cross-sectional chemofacies model that trends from the northwest to the southeast across the southern STACK trend. Meramec chemofacies distributions reflect parasequence stacking patterns. The stratigraphic variability of chemofacies indicates an upward increase of argillaceous detrital mudstone from parasequences 1 to 3. Parasequence 3 is capped by a maximum flooding surface. From parasequences 4 to 5, an increase in argillaceous-calcareous siltstone and calcareous sandstone reflects the progradational stacking. Porosity is relatively low in calcareous sandstones primarily due to calcite cement. Water saturation is high in argillaceous-calcareous siltstone, moderate in calcareous sandstone, and low in detrital mudstone. Within the Meramec, biogenic quartz is associated with drilling issues, specifically frequent bit trips due to its hardness. Interpreted biogenic quartz from element profiles corresponds to the calcareous sandstone chemofacies, which can be estimated from triple-combo well logs and can be mapped. Effective porosity and water saturation models reflect the stratigraphic variability of chemofacies and rock types and can be predicted within the defined chemostratigraphic framework. Understanding the spatial variability of effective porosity and water saturation is important for reservoir development planning.