scholarly journals Numerical solution of Catteno-Christov heat flux model over stretching/shrinking hybrid nanofluid by new itearative method

2021 ◽  
pp. 101673
Author(s):  
Muhammad Jebran Khan ◽  
Balaganesh Duraisamy ◽  
Samina Zuhra ◽  
Rashid Nawaz ◽  
Kottakkaran Sooppy Nisar ◽  
...  
Keyword(s):  
Heat Flux ◽  
Numerical Solution ◽  
Hybrid Nanofluid ◽  
Flux Model ◽  
Heat Flux Model

Non-Fourier thermal analysis on transport of heat and momentum in viscoelastic fluid over convectively heat surface in the presence of thermal memory effects

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Saima Batool ◽  
Muhammad Nawaz ◽  
Mohammed Kbiri Alaoui
Keyword(s):  
Heat Flux ◽  
Relaxation Time ◽  
Heat Generation ◽  
Thermal Relaxation ◽  
Maxwell Fluid ◽  
Literature Survey ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flux Model ◽  
Heat Flux Model

PurposeThis study presents a mathematical approach and model that can be useful to investigate the thermal performance of fluids with microstructures via hybrid nanoparticles in conventional fluid. It has been found from the extensive literature survey that no study has been conducted to investigate buoyancy effects on the flow of Maxwell fluid comprised of hybrid microstructures and heat generation aspects through the non-Fourier heat flux model.Design/methodology/approachNon-Fourier heat flux model and non-Newtonian stress–strain rheology with momentum and thermal relaxation phenomena are used to model the transport of heat and momentum in viscoelastic fluid over convectively heated surface. The role of suspension of mono and hybrid nanostructures on an increase in the thermal efficiency of fluid is being used as a medium for transportation of heat energy. The governing mathematical problems with thermo-physical correlations are solved via shooting method.FindingsIt is noted from the simulations that rate of heat transfer is much faster in hybrid nanofluid as compare to simple nanofluid with the increasing heat-generation coefficient. Additionally, an increment in the thermal relaxation time leads to decrement in the reduced skin friction coefficient; however, strong behavior of Nusselt number is shown when thermal relaxation time becomes larger for hybrid nanofluid as well as simple nanofluid.Originality/valueAccording to the literature survey, no investigation has been made on buoyancy effects of Maxwell fluid flow with hybrid microstructures and heat generation aspects through non-Fourier heat flux model. The authors confirm that this work is original, and it has neither been published elsewhere nor is it currently under consideration for publication elsewhere.

scholarly journals Numerical solution for Sakiadis flow of upper-convected Maxwell fluid using Cattaneo-Christov heat flux model

AIP Advances ◽  
2016 ◽  
Vol 6 (1) ◽  
pp. 015208 ◽  
Author(s):  
A. Mushtaq ◽  
S. Abbasbandy ◽  
M. Mustafa ◽  
T. Hayat ◽  
A. Alsaedi
Keyword(s):  
Heat Flux ◽  
Numerical Solution ◽  
Maxwell Fluid ◽  
Sakiadis Flow ◽  
Flux Model ◽  
Heat Flux Model

Research on Heat Flux Distribution in Deep Grinding

2008 ◽  
Author(s):  
D. H. Zhu ◽  
B. Z. Li ◽  
J. G. Yang
Keyword(s):  
Heat Flux ◽  
Flux Distribution ◽  
Theoretical Expression ◽  
Uniform Heat Flux ◽  
Heat Transfer Mechanism ◽  
Heat Flux Distribution ◽  
Workpiece Surface ◽  
Quadratic Curve ◽  
Flux Model ◽  
Heat Flux Model

This paper studies the heat transfer mechanism in deep grinding process, especially the heat flux to the workpiece. On the basis of triangle moving heat source, a quadratic curve heat flux model in the grinding zone was developed to determine the heat flux distribution and to estimate the surface temperature of workpiece. From the calculated theoretical expression of heat flux to the workpiece, the quadratic curve heat flux can be understood as the superposition of square law heat flux, triangular heat flux and uniform heat flux in the grinding zone. Then four heat flux models using the determined amount of heat flux were applied to estimate the workpiece surface temperatures which were compared with that measured by the embedded thermocouple. It has been found that the quadratic curve heat flux distribution seems to give the best match with measured and theoretical temperature, although square law heat flux model is good enough to predict the temperature.

A Model for Droplet Vaporization for Use in Gasoline and HCCI Engine Applications

2004 ◽  
Vol 126 (2) ◽  
pp. 422-428 ◽  
Author(s):  
Youngchul Ra ◽  
Rolf D. Feitz
Keyword(s):  
Heat Flux ◽  
Internal Heat ◽  
Droplet Surface ◽  
Fuel Vapor ◽  
Gas Mixture ◽  
Ambient Temperatures ◽  
Droplet Vaporization ◽  
Flux Model ◽  
Heat Flux Model

A model for unsteady droplet vaporization is presented that considers the droplet temperature range from flash-boiling conditions to normal evaporation. The theory of continuous thermodynamics was used to model the properties and compositions of multicomponent fuels such as gasoline. In order to model the change of evaporation rate from normal to boiling conditions more realistically, an unsteady internal heat flux model and a new model for the determination of the droplet surface temperature is proposed. An explicit form of the equation to determine the heat flux from the surrounding gas mixture to the droplet-gas interface was obtained from an approximate solution of the quasi-steady energy equation for the surrounding gas mixture, with the inter-diffusion of fuel vapor and the surrounding gas taken into account. The model was applied to calculate evaporation processes of droplets for various ambient temperatures and droplet temperatures.

Numerical study of Carreau nanofluid flow past vertical plate with the Cattaneo–Christov heat flux model

2019 ◽  
Vol 29 (2) ◽  
pp. 702-723 ◽  
Author(s):  
Vasu B. ◽  
Atul Kumar Ray
Keyword(s):  
Heat Flux ◽  
Brownian Motion ◽  
Weissenberg Number ◽  
Motion Parameter ◽  
Conduction Model ◽  
Content Type ◽  
Carreau Nanofluid ◽  
Flux Model ◽  
Heat Flux Model ◽  
Brownian Motion Parameter

PurposeTo achieve material-invariant formulation for heat transfer of Carreau nanofluid, the effect of Cattaneo–Christov heat flux is studied on a natural convective flow of Carreau nanofluid past a vertical plate with the periodic variations of surface temperature and the concentration of species. Buongiorno model is considered for nanofluid transport, which includes the relative slip mechanisms, Brownian motion and thermophoresis.Design/methodology/approachThe governing equations are non-dimensionalized using suitable transformations, further reduced to non-similar form using stream function formulation and solved by local non-similarity method with homotopy analysis method. The numerical computations are validated and verified by comparing with earlier published results and are found to be in good agreement.FindingsThe effects of varying the physical parameters such as Prandtl number, Schmidt number, Weissenberg number, thermophoresis parameter, Brownian motion parameter and buoyancy ratio parameter on velocity, temperature and species concentration are discussed and presented through graphs. The results explored that the velocity of shear thinning fluid is raised by increasing the Weissenberg number, while contrary response is seen for the shear thickening fluid. It is also found that heat transfer in Cattaneo–Christov heat conduction model is less than that in Fourier’s heat conduction model. Furthermore, the temperature and thermal boundary layer thickness expand with the increase in thermophoresis and Brownian motion parameter, whereas nanoparticle volume fraction increases with increase in thermophoresis parameter, but reverse trend is observed with increase in Brownian motion parameter.Originality/valueThe present investigation is relatively original as very little research has been reported on Carreau nanofluids under the effect of Cattaneo–Christov heat flux model.

Sign in / Sign up

Export Citation Format

Share Document