Different maximum latewood density and blue intensity measurements techniques reveal similar results

2018 ◽  
Vol 49 ◽  
pp. 94-101 ◽  
Author(s):  
Ryszard J. Kaczka ◽  
Barbara Spyt ◽  
Karolina Janecka ◽  
Ilka Beil ◽  
Ulf Büntgen ◽  
...  
2020 ◽  
Vol 17 (18) ◽  
pp. 4559-4570 ◽  
Author(s):  
Feng Wang ◽  
Dominique Arseneault ◽  
Étienne Boucher ◽  
Shulong Yu ◽  
Steeven Ouellet ◽  
...  

Abstract. The stain of wood samples from lake subfossil trees (LSTs) is challenging the wide application of the blue intensity (BI) technique for millennial dendroclimatic reconstructions. In this study, we used seven chemical destaining reagents to treat samples of subfossil black spruce (Picea mariana (Mill.) B.S.P.) trees from two lakes in the eastern Canadian boreal forest. We subsequently compared latewood BI (LBI) and delta BI (DBI) time series along with conventional maximum latewood density (MXD) measured from the stained and destained samples. Results showed that the stain of our samples is most likely caused by postsampling oxidation of dissolved ferrous iron in lake sediments that penetrated into wood. Three reagents (ascorbic acid, sodium ascorbate, and sodium dithionite all mixed with ethylenediaminetetraacetic acid) could remove >90 % of Fe. However, even for the best chemical protocol, a discrepancy of about +2 ∘C compared to MXD data remained in the LBI-based temperature reconstruction due to incomplete destaining. On the contrary, the simple mathematical delta correction, DBI, was unaffected by the Fe stain and showed very similar results compared to MXD data (r>0.82) from annual to centennial timescales over the past ∼360 years. This study underlines the difficulty of completely destaining lake subfossil samples while confirming the robustness of the DBI approach. DBI data measured from stained LSTs can be used to perform robust millennial temperature reconstructions.


2020 ◽  
Author(s):  
Feng Wang ◽  
Dominique Arseneault ◽  
Étienne Boucher ◽  
Shulong Yu ◽  
Steeven Ouellet ◽  
...  

Abstract. The stain of wood samples from lake subfossil trees (LSTs) is challenging the wide application of the blue intensity (BI) technique for millennial dendroclimatic reconstructions. In this study, we used seven chemical de-staining reagents to treat samples of subfossil black spruce (Picea mariana (Mill.) B.S.P.)) trees from two lakes in the eastern Canadian boreal forest. We subsequently compared latewood BI (LBI) and delta BI (DBI) time series along with conventional maximum latewood density (MXD) measured from the stained and de-stained samples. Results show that the stain of our samples is most likely caused by post-sampling oxidation of dissolved ferrous iron in lake sediments that penetrated into wood. Three reagents (ascorbic acid, sodium ascorbate and sodium dithionite all mixed with ethylenediaminetetraacetic acid) could remove > 90 % of Fe. However, even for the best chemical protocol, a discrepancy of about +2 °C compared to MXD data remains in the LBI-based temperature reconstruction due to incomplete de-staining. On the contrary, the simple mathematical delta correction, DBI is unaffected by Fe stain and shows very similar results compared to MXD data (r > 0.82) from annual to centennial timescales over the past ~ 360 years. This study underlines the difficulty of completely de-staining lake subfossil samples, while confirming the robustness of the DBI approach. DBI data measured from stained LSTs can be used to perform robust millennial temperature reconstructions.


2020 ◽  
Vol 64 ◽  
pp. 125771
Author(s):  
Feng Wang ◽  
Dominique Arseneault ◽  
Étienne Boucher ◽  
Gabrielle Galipaud Gloaguen ◽  
Anne Deharte ◽  
...  

2020 ◽  
Author(s):  
Laia Andreu-Hayles ◽  
Rosanne D'Arrigo ◽  
Rose Oelkers ◽  
Kevin Anchukaitis ◽  
Greg Wiles ◽  
...  

<p>Tree ring-width (TRW) and Maximum Latewood Density (MXD) series have been largely used to develop high-resolution temperature reconstructions for the Northern Hemisphere. The divergence phenomenon, a weakening of the positive relationship between TRW and summer temperatures, has been observed particularly in northwestern North America chronologies. In contrast, MXD datasets have shown a more stable relationship with summer temperatures, but it is costly and labor-intensive to produce. Recently, methodological advances in image analyses have led to development of a less expensive and labor-intensive MXD proxy known as Blue Intensity (BI). Here, we compare 6 newly developed BI tree-ring chronologies of white spruce (<em>Picea glauca</em> [Moench] Voss) from high-latitude boreal forests in North America (Alaska in USA; Yukon and the Northwestern Territory in Canada), with MXD chronologies developed at the same sites. We assessed the quality of BI in relation to MXD based on mean correlation between trees, chronology reliability based on the Expressed Population Signal (EPS), spectral properties, and the strength and spatial extent of the temperature signal. Individual BI chronologies established significant correlations with summer temperatures showing a similar strength and spatial cover than MXD chronologies. Overall, the BI tree-ring data is emerging as a valuable proxy for generating high-resolution temperature spatial reconstructions over northwestern America.</p>


The Holocene ◽  
2014 ◽  
Vol 24 (11) ◽  
pp. 1428-1438 ◽  
Author(s):  
Rob Wilson ◽  
Rohit Rao ◽  
Miloš Rydval ◽  
Cheryl Wood ◽  
Lars-Åke Larsson ◽  
...  

Maximum latewood density (MXD) is a strong proxy of summer temperatures. Despite this, there is a paucity of long MXD chronologies in the Northern Hemisphere, which limits large-scale tree-ring-based reconstructions of past temperature which are dominated by ring-width (RW) data – a weaker temperature proxy at inter-annual time-scales. This paucity likely results from the relative expense of measuring MXD and the lack of laboratories with the facilities to measure it. Herein, we test the ability of a relatively new, less expensive, tree-ring parameter, Blue Intensity (BI), to act as a surrogate parameter for MXD. BI was measured on Engelmann spruce samples from British Columbia where MXD had previously been measured to allow direct comparison between the two parameters. Signal strength analyses indicate that 8 MXD series were needed to acquire a robust mean chronology while BI needed 14. Utilising different detrending methods and parameter choices (RW + MXD vs RW + BI), a suite of reconstruction variants was developed. The explained variance from the regression modelling (1901–1995) of May–August maximum temperatures ranged from 52% to 55%. Validation tests over the earlier 1870–1900 period could not statistically distinguish between the different variants, although spectral analysis identified more lower frequency information extant in the MXD-based reconstructions – although this result was sensitive to the detrending method used. Ultimately, despite the MXD-based reconstruction explaining slightly more of the climatic variance, statistically robust reconstructions of past summer temperatures were also derived using BI. These results suggest that there is great potential in utilising BI for dendroclimatology in place of MXD data. However, more experimentation is needed to understand (1) how well BI can capture centennial and lower frequency information and (2) what biases may result from wood discolouration, either from species showing a distinct heartwood/sapwood boundary or from partly decayed sub-fossil samples.


2013 ◽  
Vol 9 (5) ◽  
pp. 5227-5261 ◽  
Author(s):  
J. A. Björklund ◽  
B. E. Gunnarson ◽  
K. Seftigen ◽  
J. Esper ◽  
H. W. Linderholm

Abstract. At high latitudes, where low temperatures mainly limit tree-growth, measurements of wood density (e.g. Maximum Latewood Density, MXD) using the X-Ray methodology provide a temperature proxy that is superior to that of TRW. Density measurements are however costly and time consuming and have lead to experimentation with optical flatbed scanners to produce Maximum Blue Intensity (BImax). BImax is an excellent proxy for density on annual scale but very limited in skill on centennial scale. Discolouration between samples is limiting BImax where specific brightnesses can have different densities. To overcome this, the new un-exploited parameter Δ blue intensity (ΔBI) was constructed by using the brightness in the earlywood (BIEW) as background, (BImax − BIEW = ΔBI). This parameter was tested on X-Ray material (MXD − earlywood density = ΔMXD) and showed great potential both as a quality control and as a booster of climate signals. Unfortunately since the relationship between grey scale and density is not linear, and between-sample brightness can differ tremendously for similar densities, ΔBI cannot fully match ΔMXD in skill as climate proxy on centennial scale. For ΔBI to stand alone, the range of brightness/density offset must be reduced. Further studies are needed to evaluate this possibility, and solutions might include heavier sample treatment (reflux with chemicals) or image-data treatment (digitally manipulating base-line levels of brightness).


1996 ◽  
Vol 26 (1) ◽  
pp. 143-148 ◽  
Author(s):  
Rosanne D. D'arrigo ◽  
Edward R. Cook ◽  
Gordon C. Jacoby

Temperature-sensitive maximum latewood density chronologies from sites near tree line in Labrador are used to infer past changes in warm-season surface air and sea surface temperatures for the northwest Atlantic. Temperatures are reconstructed for the Grand Banks region based on density records from southern Labrador, while a density series from near Okak Fiord, northern Labrador, is used to infer past temperature variations for north-coastal Labrador and the adjacent Labrador Sea. The Labrador chronologies show good agreement with annual and decadal-scale temperature fluctuations over the recent period of instrumental record, and extend this temperature information into the past by several centuries. The lowest density value at the Okak site occurs in 1816, known as the "year without a summer" in eastern North America. Spectral analyses reveal statistically significant variations with periods of around 8.7, 18–22, and 45–66 years. These fluctuations are in general agreement with those identified in several instrumental and modeling analyses of North Atlantic climate.


2012 ◽  
Vol 8 (4) ◽  
pp. 2695-2730
Author(s):  
O. Wetter ◽  
C. Pfister

Abstract. This paper challenges the argument obtained from the analysis of grape harvest (GHD) and maximum latewood density (MXD) data that the 2003 heat-wave in Western Europe was the most extreme warm anomaly in the last millennium. We have evidence that the heat and drought in 1540 known from numerous contemporary narrative documentary reports is not adequately reflected in these estimates. Vines severely suffered from the extreme heat and drought which led vine-growers to postpone the harvest in hope for a rain spell. At the time of harvest many grapes had already become raisins. Likewise, many trees suffered from premature leaf fall probably as a result of a decreased net photosynthesis, as it was measured in 2003. To more realistically assess 1540's spring–summer (AMJJ) temperature we present a new Swiss series of critically evaluated GHD. Basing on three different approaches considering the drought effect on vines, temperatures were assessed between 4.3 °C and 6.3 °C (including the Standard Error of Estimate (SEE) of 0.52 °C) above the 1901–2000 mean which is significantly higher than the value of 2.9 °C measured in 2003. Considering the significance of soil moisture deficits for extreme heat-waves this result still needs to be validated with estimated seasonal precipitation from independent evidence.


1994 ◽  
Vol 42 (1) ◽  
pp. 88-99 ◽  
Author(s):  
Malcolm K. Hughes ◽  
Wu Xiangding ◽  
Shao Xuemei ◽  
Gregg M. Garfin

AbstractMay-June (MJ) and April-July (AJ) precipitation at Huashan in north-central China has been reconstructed for the period A.D. 1600 to 1988 using tree-ring density and width fromPinus armandii. MJ precipitation (based on ring width and maximum latewood density) calibrated and cross-validated against local instrumental data more strongly than AJ precipitation (based only on ring width). A major drought was reconstructed for the mid- and late 1920s, confirmed by local documentary sources. This drought (culminating in 1929) was the most severe of the 389-yr period for MJ and second most severe for AJ, after an event ending in 1683. Neither reconstruction shows much spectral power at frequencies lower than 1 in 10 yr, but both show concentrations of power between 2.1 and 2.7 yr and 3.5 to 9 yr. There are significant correlations between the two reconstructions and a regional dryness/wetness index (DW) based on documentary sources, particularly at high frequencies. These correlations are focused in the 7.6- to 7.3-, 3.8- to 3.6-, and 2.5-yr periods. Using singular spectrum analysis, quasiperiodic behavior with a period close to 7.2 yr was identified in the MJ precipitation reconstruction and in the DW index based on documents.


The Holocene ◽  
2019 ◽  
Vol 29 (11) ◽  
pp. 1817-1830 ◽  
Author(s):  
R Wilson ◽  
K Anchukaitis ◽  
L Andreu-Hayles ◽  
E Cook ◽  
R D’Arrigo ◽  
...  

In north-western North America, the so-called divergence problem (DP) is expressed in tree ring width (RW) as an unstable temperature signal in recent decades. Maximum latewood density (MXD), from the same region, shows minimal evidence of DP. While MXD is a superior proxy for summer temperatures, there are very few long MXD records from North America. Latewood blue intensity (LWB) measures similar wood properties as MXD, expresses a similar climate response, is much cheaper to generate and thereby could provide the means to profoundly expand the extant network of temperature sensitive tree-ring (TR) chronologies in North America. In this study, LWB is measured from 17 white spruce sites ( Picea glauca) in south-western Yukon to test whether LWB is immune to the temporal calibration instabilities observed in RW. A number of detrending methodologies are examined. The strongest calibration results for both RW and LWB are consistently returned using age-dependent spline (ADS) detrending within the signal-free (SF) framework. RW data calibrate best with June–July maximum temperatures (Tmax), explaining up to 28% variance, but all models fail validation and residual analysis. In comparison, LWB calibrates strongly (explaining 43–51% of May–August Tmax) and validates well. The reconstruction extends to 1337 CE, but uncertainties increase substantially before the early 17th century because of low replication. RW-, MXD- and LWB-based summer temperature reconstructions from the Gulf of Alaska, the Wrangell Mountains and Northern Alaska display good agreement at multi-decadal and higher frequencies, but the Yukon LWB reconstruction appears potentially limited in its expression of centennial-scale variation. While LWB improves dendroclimatic calibration, future work must focus on suitably preserved sub-fossil material to increase replication prior to 1650 CE.


Sign in / Sign up

Export Citation Format

Share Document