Biodiesel production from castor oil in Egypt: Process optimisation, kinetic study, diesel engine performance and exhaust emissions analysis

Energy ◽  
2018 ◽  
Vol 157 ◽  
pp. 843-852 ◽  
Author(s):  
Omar Aboelazayem ◽  
Nour Sh. El-Gendy ◽  
Ahmed A. Abdel-Rehim ◽  
Fatma Ashour ◽  
Mohamed A. Sadek
Keyword(s):  
Diesel Engine ◽  
Kinetic Study ◽  
Castor Oil ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Biodiesel Production ◽  
Process Optimisation

scholarly journals Biodiesel Production from Castor Oil and Its Application in Diesel Engine

2014 ◽  
Vol 31 (2) ◽  
pp. 90 ◽  
Author(s):  
S Ismail ◽  
S. A Abu ◽  
R Rezaur ◽  
H Sinin
Keyword(s):  
Diesel Engine ◽  
Castor Oil ◽  
Engine Performance ◽  
Calorific Value ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Mass Ratio ◽  
Performance And Emission ◽  
Transesterification Method ◽  
Optimum Production

In this study, the optimum biodiesel conversion from crude castor oil to castor biodiesel (CB) through transesterification method was investigated. The base catalyzed transesterification under different reactant proportion such as the molar ratio of alcohol to oil and mass ratio of catalyst to oil was studied for optimum production of castor biodiesel. The optimum condition for base catalyzed transesterification of castor oil was determined to be 1:4.5 of oil to methanol ratio and 0.005:1 of potassium hydroxide to oil ratio. The fuel properties of the produced CB such as the calorific value, flash point and density were analyzed and compared to conventional diesel. Diesel engine performance and emission test on different CB blends proved that CB was suitable to be used as diesel blends. CB was also proved to have lower emission compared to conventional diesel.

Castor oil, a source for biodiesel production and its impact on the diesel engine performance

2019 ◽  
Vol 28 ◽  
pp. 1-10 ◽  
Author(s):  
Sadegh Azizzadeh Hajlari ◽  
Bahman Najafi ◽  
Sina Faizollahzadeh Ardabili
Keyword(s):  
Diesel Engine ◽  
Castor Oil ◽  
Engine Performance ◽  
Biodiesel Production

scholarly journals Investigation on Physicochemical Properties of Wastewater Grown Microalgae Methyl Ester and its Effects on CI Engine

2020 ◽  
Vol 24 (1) ◽  
pp. 72-87 ◽  
Author(s):  
Sara Tayari ◽  
Reza Abedi ◽  
Ali Abedi
Keyword(s):  
Methyl Ester ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Biodiesel Production ◽  
Emissions Reduction ◽  
Test Results ◽  
Main Fatty Acid ◽  
Ci Engine ◽  
Hc Emissions ◽  
A Minor

AbstractMicroalgae have been mentioned as a promising feedstock for biodiesel production. In this study, microalgae Chlorella vulgaris (MCV) was cultivated in a bioreactor with wastewater. After biodiesel production from MCV oil via transesterification reaction, chemical and physical properties of MCV methyl ester were evaluated with regular diesel and ASTM standard. Besides, engine performance and exhaust emissions of CI engine fuelled with the blends of diesel-biodiesel were measured. The GC-MS analysis showed that oleic and linoleic acids were the main fatty acid compounds in the MCV methyl ester. Engine test results revealed that the use of biodiesel had led to a major decrease in CO and HC emissions and a modest reduction in CO2 emissions, whereas there was a minor increase in NOx emissions. Furthermore, there was a slight decrease in the engine power and torque while a modest increase in brake specific fuel consumption which are acceptable due to exhaust emissions reduction. The experimental results illustrate considerable capabilities of applied MVC biodiesel as an alternative fuel in diesel engines to diminish the emissions.

scholarly journals THE EFFECT OF DIESEL-BIODIESEL BLENDS ON THE PERFORMANCE AND EXHAUST EMISSIONS OF A DIRECT INJECTION OFF-ROAD DIESEL ENGINE

Transport ◽  
2014 ◽  
Vol 29 (4) ◽  
pp. 440-448 ◽  
Author(s):  
Tomas Mickevičius ◽  
Stasys Slavinskas ◽  
Slawomir Wierzbicki ◽  
Kamil Duda
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Bench Test ◽  
Maximum Pressure ◽  
Cylinder Pressure ◽  
Biodiesel Blends ◽  
Performance And Emission

This paper presents a comparative analysis of the diesel engine performance and emission characteristics, when operating on diesel fuel and various diesel-biodiesel (B10, B20, B40, B60) blends, at various loads and engine speeds. The experimental tests were performed on a four-stroke, four-cylinder, direct injection, naturally aspirated, 60 kW diesel engine D-243. The in-cylinder pressure data was analysed to determine the ignition delay, the Heat Release Rate (HRR), maximum in-cylinder pressure and maximum pressure gradients. The influence of diesel-biodiesel blends on the Brake Specific Fuel Consumption (bsfc) and exhaust emissions was also investigated. The bench test results showed that when the engine running on blends B60 at full engine load and rated speed, the autoignition delay was 13.5% longer, in comparison with mineral diesel. Maximum cylinder pressure decreased about 1–2% when the amount of Rapeseed Methyl Ester (RME) expanded in the diesel fuel when operating at full load and 1400 min–1 speed. At rated mode, the minimum bsfc increased, when operating on biofuel blends compared to mineral diesel. The maximum brake thermal efficiency sustained at the levels from 0.3% to 6.5% lower in comparison with mineral diesel operating at full (100%) load. When the engine was running at maximum torque mode using diesel – RME fuel blends B10, B20, B40 and B60 the total emissions of nitrogen oxides decreased. At full and moderate load, the emission of carbon monoxide significantly raised as the amount of RME in fuel increased.

Analysis of combustion characteristics, engine performance and exhaust emissions of diesel engine fueled with upgraded waste source fuel

2017 ◽  
Vol 42 (28) ◽  
pp. 17993-18004 ◽  
Author(s):  
Abdullah Adam ◽  
Nur Atiqah Ramlan ◽  
Nur Fauziah Jaharudin ◽  
Herzwan Hamzah ◽  
Mohd Fahmi Othman ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Combustion Characteristics

Performance and Exhaust Emissions of a Diesel Engine Running With DME

2001 ◽  
Author(s):  
F. Maroteaux ◽  
G. Descombes ◽  
F. Sauton
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Injection Rate ◽  
Combustion Reaction ◽  
Emissions Reduction ◽  
Turbocharged Diesel Engine ◽  
Turbocharging System ◽  
Performance And Emissions ◽  
Thermodynamic Conditions

Abstract This research investigates engine performance and the potential of reducing exhaust emissions by using Dimethyl Ether (DME) which is an alternative fuel for diesel engines. The objective of this study it to evaluate (on the bed test) the performance and emissions reduction potential of an engine running with DME. A 4 cylinder passenger car HSDI Common Rail turbocharged diesel engine without specific modifications was used. The results obtained on this engine running with DME using diesel fuel as reference are encouraging. In the next steps of this study the injection rate will be adapted to DME operation and to the geometric and thermodynamic conditions of the combustion reaction. A study of the combustion reaction is also necessary in order to optimize the turbocharging system to exclusive DME operation.

Sign in / Sign up

Export Citation Format

Share Document