Supercapacitors aging assessment in wind/tidal intermittent energies application with variable temperature

2022 ◽  
Vol 46 ◽  
pp. 103790
Author(s):  
Cheikh Tidiane Sarr ◽  
Mamadou Baïlo Camara ◽  
Brayima Dakyo
Keyword(s):  
Variable Temperature

Self-Assembly of Hydrogels From Elastin-Mimetic Block Copolymers

2002 ◽  
Vol 724 ◽  
Author(s):  
Elizabeth R. Wright ◽  
R. Andrew McMillan ◽  
Alan Cooper ◽  
Robert P. Apkarian ◽  
Vincent P. Conticello
Keyword(s):  
Block Copolymers ◽  
Self Assembly ◽  
Triblock Copolymers ◽  
Variable Temperature ◽  
Inverse Temperature ◽  
Temperature Transition ◽  
Scanning Calorimetry ◽  
Design Synthesis ◽  
Inverse Temperature Transition ◽  
Functional Biomaterials

AbstractTriblock copolymers have traditionally been synthesized with conventional organic components. However, triblock copolymers could be synthesized by the incorporation of two incompatible protein-based polymers. The polypeptides would differ in their hydrophobicity and confer unique physiochemical properties to the resultant materials. One protein-based polymer, based on a sequence of native elastin, that has been utilized in the synthesis of biomaterials is poly (Valine-Proline-Glycine-ValineGlycine) or poly(VPGVG) [1]. This polypeptide has been shown to have an inverse temperature transition that can be adjusted by non-conservative amino acid substitutions in the fourth position [2]. By combining polypeptide blocks with different inverse temperature transition values due to hydrophobicity differences, we expect to produce amphiphilic polypeptides capable of self-assembly into hydrogels. Our research examines the design, synthesis and characterization of elastin-mimetic block copolymers as functional biomaterials. The methods that are used for the characterization include variable temperature 1D and 2D High-Resolution-NMR, cryo-High Resolutions Scanning Electron Microscopy and Differential Scanning Calorimetry.

Stochastic Computing via In Operando Modulation of Rectification in Molecular Tunneling Junctions

2020 ◽  
Author(s):  
Xinkai Qiu ◽  
Sylvia Rousseva ◽  
Gang Ye ◽  
Jan C. Hummelen ◽  
Ryan Chiechi
Keyword(s):  
Self Assembly ◽  
Variable Temperature ◽  
Self Assembled Monolayers ◽  
Microfluidic Channels ◽  
Proof Of Concept ◽  
Glycol Ethers ◽  
Stochastic Computing ◽  
Assembled Monolayers ◽  
In Operando ◽  
Tunneling Junctions

This paper describes the reconfiguration of molecular tunneling junctions during operation via the self-assembly of bilayers of glycol ethers. We use well-established functional groups to modulate the magnitude and direction of rectification in assembled tunneling junctions by exposing them to solutions containing different glycol ethers. Variable-temperature measurements establish that rectification occurs by a bias-dependent tunneling-hopping mechanism and that glycol ethers, beside being an unusually efficient tunneling medium, behave identically to alkanes. We fabricated memory bits from crossbar junctions prepared by injecting eutectic Ga-In into microfluidic channels. Two 8-bit registers were able to perform logical AND operations on bit strings encoded into chemical packets as microfluidic droplets that alter the composition of the crossbar junctions through self-assembly to effect memristor-like properties. This proof of concept work demonstrates the potential for fieldable molecular-electronic devices based on tunneling junctions of self-assembled monolayers and bilayers.

Commodity Heating Medium and Mexican Fruit Fly Mortality

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 533e-533
Author(s):  
Krista C. Shellie
Keyword(s):  
Carbon Dioxide ◽  
Variable Temperature ◽  
Larval Mortality ◽  
Fruit Fly ◽  
Hot Water ◽  
Water Bath ◽  
Controlled Atmosphere ◽  
Mexican Fruit Fly ◽  
Temperature Water ◽  
Heating Medium

The objective of this research was to investigate whether the medium used to transfer heat to a commodity influenced the mortality of Mexican fruit fly larvae. A similar 2-h heat dose was delivered to grapefruit via immersion in a variable temperature water bath or via exposure to a rapidly circulating gas. The concentration of oxygen and carbon dioxide inside the grapefruit was analyzed at 30-min intervals and grapefruit center temperatures recorded every 60 s during heating. The mortality of larvae located inside grapefruit during heating in a controlled atmosphere or in hot water was significantly higher than that of larvae located inside grapefruit heated in air. The internal atmosphere of grapefruit heated in a controlled atmosphere or in hot water contained significantly higher levels of carbon dioxide and lower levels of oxygen than grapefruit heated in air. Larval mortality was compared after larvae were heated in media by rapidly circulating air or by an atmosphere containing 4 kPa of oxygen and 18 kPa of carbon dioxide to evaluate whether the altered atmosphere or a heat-induced fruit metabolite was responsible for enhanced mortality. The significantly higher mortality of larvae heated in media in the presence of an altered atmosphere suggested that the altered atmosphere enhanced larval mortality. Results from this research suggest that reducing oxygen and or increasing the level of carbon dioxide during heating can enhance mortality of the Mexican fruit fly and potentially reduce the heat dose required for quarantine security.

Single Molecules in Strong Optical Fields: A Variable-Temperature Molecular Junction Spectroscopy Setup

2021 ◽  
Author(s):  
Hai Bi ◽  
Chao Jing ◽  
Peter Hasch ◽  
Yuxiang Gong ◽  
Daniel Gerster ◽  
...  
Keyword(s):  
Variable Temperature ◽  
Single Molecules ◽  
Molecular Junction ◽  
Optical Fields

Variable Temperature Measurement on Operating Pentacene-Based OTFT

2008 ◽  
Vol 1091 ◽  
Author(s):  
Hung-Keng Chen ◽  
Po-Tsun Liu ◽  
Ting-Chang Chang ◽  
S.-L. Shy
Keyword(s):  
Conduction Mechanism ◽  
Variable Temperature ◽  
Electrical Measurement ◽  
Isokinetic Temperature ◽  
Trap States ◽  
Band Tail ◽  
Thermally Activated ◽  
Multiple Trapping ◽  
Higher Temperature ◽  
Release Model

AbstractVariable temperature electrical measurement is well-established and used for determining the conduction mechanism in semiconductors. There is a Meyer¡VNeldel relationship between the activation energy and the prefactor with a Meyer¡VNeldel energy of 30.03 meV, which corresponds well with the isokinetic temperature of about 350 K. Therefore, the multiple trapping and release model is properly used to explain the thermally activated phenomenon. By the method, an exponential distribution of traps is assumed to be a better representation of trap states in band tail. Samples with higher temperature during measurement are observed to show better mobility, higher on-current and lower resistance, which agree well with the multiple trapping and release model proposed to explain the conduction mechanism in pentacene-based OTFTs.

scholarly journals Study on the Variable-Temperature Drying Process of Corn Drying in an Industrial Corn-Drying System Equipped with a Self-Adaptive Control Heat Exchanger

2021 ◽  
Vol 11 (6) ◽  
pp. 2772
Author(s):  
Bin Li ◽  
Zhiheng Zeng ◽  
Xuefeng Zhang ◽  
Ye Zhang
Keyword(s):  
Adaptive Control ◽  
Energy Consumption ◽  
Heat Loss ◽  
Thermal Performance ◽  
Variable Temperature ◽  
The Other ◽  
Drying Process ◽  
Drying Kinetic ◽  
Drying System ◽  
Self Adaptive

To realize energy-saving and efficient industrial grain drying, the present work studied the variable-temperature drying process of corn drying in a novel industrial corn-drying system with a heat recycling and self-adaptive control function. The drying kinetics, thermal performance, heat-loss characteristics and the heat-recycling performance of the drying system under different allocations between flue gas and hot air were investigated, and the optimized drying process was proposed and compared with two constant drying processes. The results showed that the optimized drying process exhibited better drying kinetic and thermal performance than the two constant drying processes. More specifically, the total heat loss, total energy consumption and specific energy consumption of the optimized drying process were ascertained to be 36,132.85 MJ, 48,803.99 MJ and 7290.27 kJ/kg, respectively, which were lower than those of the other two processes. On the other hand, the thermal efficiency of the drying chamber for the optimized drying process was ascertained to be varied within the range of 6.81–41.71%. Overall, the validation results showed that the optimized drying process can significantly improve the drying performance of the drying system.

Tensile properties of finger-jointed lumber under high-temperature and oxygen-free conditions

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Kong Yue ◽  
Feng Wang ◽  
Weidong Lu ◽  
Zhongqiu Tang ◽  
Zhangjing Chen ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Tensile Properties ◽  
High Temperatures ◽  
Variable Temperature ◽  
Physical Property ◽  
Solid Wood ◽  
Nitrogen Atmosphere ◽  
Thermal Physical Property ◽  
Electron Microscopy Analysis ◽  
Increasing Temperature

Abstract A model for engineered wood was developed that considers the parallel-to-grain tensile strength of finger-jointed lumber at high temperatures relevant to fire conditions. The finger-jointed lumber was composed of Douglas fir, larch, and poplar wood with phenol-resorcinol-formaldehyde (PRF) as an adhesive. The tensile properties of the finger-jointed lumber were evaluated at high temperatures under oxygen-free conditions, i.e. in a nitrogen atmosphere. A combination of chemical and thermal-physical property analysis of the PRF adhesive and microscopic observations on the glueline was used to discuss the reduction of tensile strength of the parallel-to-grain finger-jointed lumber at variable temperature. The results show that the tensile strength of the finger-jointed lumber decreased linearly with increasing temperature. The parallel-to-grain tensile strength of the PRF finger-jointed samples at 20 and 280 °C were 84 and 5% of the tensile strength of the solid wood at 20 °C, respectively. The thermal-physical properties and scanning electron microscopy analysis revealed that the pyrolysis intensity of the PRF adhesive was lower than that of the wood at 220 °C or higher.

Sign in / Sign up

Export Citation Format

Share Document