scholarly journals Material similarity of scaled models

Author(s):  
Shuai Wang ◽  
Fei Xu ◽  
Xiaoyu Zhang ◽  
Leifeng Yang ◽  
Xiaochuan Liu
Keyword(s):  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Felix Lederle ◽  
Eike G. Hübner

Abstract3D models of chemical structures are an important tool for chemistry lectures and exercises. Usually, simplified models based on standard bond length and angles are used. These models allow for a visualized discussion of (stereo)chemical aspects, but they do not represent the true spatial conditions. 3D-printing technologies facilitate the production of scale models. Several protocols describe the process from X-ray structures, calculated geometries or virtual molecules to printable files. In contrast, only a few examples describe the integration of scaled models in lecture courses. True bond angles and scaled bond lengths allow for a detailed discussion of the geometry and parameters derived therefrom, for example double bond character, aromaticity and many more. Here, we report a complete organic chemistry/stereochemistry lecture course and exercise based on a set of 37 scale models made from poly(lactic acid) as sustainable material. All models have been derived from X-ray structures and quantum chemical calculations. Consequently, the models reflect the true structure as close as possible. A fixed scaling factor of 1 : 1.8·108 has been applied to all models. Hands-on measuring of bond angles and bond length leads to an interactive course. The course has been evaluated with a very positive feedback.


2007 ◽  
Vol 22 (22) ◽  
pp. 3838-3851 ◽  
Author(s):  
R. A. KISHEK ◽  
G. BAI ◽  
S. BERNAL ◽  
D. FELDMAN ◽  
T. F. GODLOVE ◽  
...  

New coherent radiation sources in the hard X-ray and Terahertz regimes promise exciting new developments in science, as previously dark areas of the spectrum are brightly illuminated. Ultra-short, ultra-bright radiation packets can probe the structure of matter, and image chemical and biological processes well beyond the present state of the art. Production of this coherent radiation, however, places an unprecedented challenge on the production and acceleration of high-quality electron beams. To deliver a nano-Coulomb of charge with an emittance of less than one micron, while transporting the beam through long sections of acceleration and compression, is the prerequisite for unlocking the gates of this promising new science. Using a low-energy electron storage ring, we deliberately enhance the space charge force while slowing down the time-scale to easily measurable levels so as to maximize our understanding of the particle dynamics necessary for producing bright beams.


2017 ◽  
Vol 24 (3) ◽  
pp. 527-541 ◽  
Author(s):  
G Petrone ◽  
M Manfredonia ◽  
S De Rosa ◽  
F Franco

Similarity theory is a branch of engineering science that deals with establishing conditions of similarity among phenomena and is applied to various fields, such as structural engineering problems, vibration and impact. Tests and numerical simulation of scaled models are still a valuable design tool, whose purpose is to accurately predict the behaviour of large or small prototypes through scaling laws applied to the experimental and numerical results. The aim of this paper is to predict the behaviour of the complete and incomplete similarity of stiffened cylinders by applying distorted scaling laws of the models in similitude. The investigation is performed using models based on the finite element method within commercial software. Two classes of cylinders scaled, with different laws, and, hence, reproducing replicas (exact similitude) and avatars (distorted similitude) are investigated.


2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Weiwei Li ◽  
Weiqing Liu ◽  
Shuguang Wang ◽  
Dongsheng Du

The improvement effect of a new strengthening strategy on dynamic action of masonry structure, by installing prefabricated concrete walls on the outer facades, is validated by shaking table test presented in this paper. We carried out dynamic tests of two geometrically identical five-story reduced scaled models, including an unstrengthened and a strengthened masonry model. The experimental analysis encompasses seismic performances such as cracking patterns, failure mechanisms, amplification factors of acceleration, and displacements. The results show that the strengthened masonry structure shows much more excellent seismic capacity when compared with the unstrengthened one.


1991 ◽  
Author(s):  
Barry Deakin

During the development of new stability regulations for the U.K. Department of Transport, doubt was cast over many of the assumptions made when assessing the stability of sailing vessels. In order to investigate the traditional methods a programme of work was undertaken including wind tunnel tests and full scale data acquisition. The work resulted in a much improved understanding of the behaviour of sailing vessels and indeed indicated that the conventional methods of stability assessment are invalid, the rules now applied in the U.K. being very different to those in use elsewhere. The paper concentrates on the model test techniques which were developed specifically for this project but which will have implications to other vessel types. The tests were of two kinds: measurement of the wind forces and moments on a sailing vessel; and investigation of the response of sailing vessels to gusts of wind. For the force and moment measurements models were mounted in a tank of water on a six component balance and tested in a large boundary layer wind tunnel. Previous tests in wind tunnels have always concentrated on performance and the heeling moments have not normally been measured correctly. As the measurements of heeling moment at a range of heel angles was of prime importance a new balance and mounting system was developed which enabled the above water part of the vessel to be modelled correctly, the underwater part to be unaffected by the wind, and the interface to be correctly represented without interference. Various effects were investigated including rig type, sheeting, heading, heel angle and wind gradient. The gust response tests were conducted with Froude scaled models floating in a pond set in the wind tunnel floor. A mechanism was installed in the tunnel which enabled gusts of various characteristics to be generated, and the roll response of the models was measured with a gyroscope. These tests provided information on the effects of inertia, damping, rolling and the characteristics of the gust. Sample results are presented to illustrate the uses to which these techniques have been put.


2021 ◽  
pp. 107754632110377
Author(s):  
Fengxia He ◽  
Zhong Luo ◽  
Lei Li ◽  
Xiaoxia Zhang

Similitude laws can be used to extrapolate the vibration characteristic of a small, inexpensive, and easily tested model into structural behavior for the full-size prototype. In this article, a systematic similitude approach is proposed to predict the natural frequency, mode shape, and vibration response of composite laminated plates. The emphasis of this article is to predict the vibration characteristic of composite laminated plates in an effective and convenient way. Sensitivity analysis (SA) is introduced to improve the prediction accuracy of natural frequency. For distortion similarity, the prediction accuracy is improved close to 5%. Modal assurance criterion (MAC) measures the consistency of mode shapes of the full-size prototype and scaled models. The influence of stacking sequence on mode consistency is investigated. Similitude based on virtual mode and statistical energy (SVMSE) is proposed to extrapolate the transient response of the prototype to simulate the shock environment, such as satellite–rocket separation, etc. In conclusion, the prediction accuracy of natural frequency, mode consistency, and response coincidence are considered comprehensively to extrapolate the vibration characteristic of the full-size laminated plates.


2018 ◽  
Vol 620 ◽  
pp. A54 ◽  
Author(s):  
C. Saffe ◽  
M. Flores ◽  
P. Miquelarena ◽  
F. M. López ◽  
M. Jaque Arancibia ◽  
...  

Aims. In an effort to improve spectroscopic methods of stellar parameters determination, we implemented non-solar-scaled opacities in a simultaneous derivation of fundamental parameters and abundances. We wanted to compare the results with the usual solar-scaled method using a sample of solar-type and evolved stars. Methods. We carried out a high-precision determination of stellar parameters and abundances by applying non-solar-scaled opacities and model atmospheres. Our sample is composed of 20 stars, including main sequence and evolved objects. The stellar parameters were determined by imposing ionization and excitation equilibrium of Fe lines, with an updated version of the FUNDPAR program, together with plane-parallel ATLAS12 model atmospheres and the MOOG code. Opacities for an arbitrary composition and vmicro were calculated through the opacity sampling (OS) method. We used solar-scaled models in the first step, and then continued the process, but scaled to the abundance values found in the previous step (i.e. non-solar-scaled). The process finishes when the stellar parameters of one step are the same as in the previous step, i.e. we use a doubly iterated method. Results. We obtained a small difference in stellar parameters derived with non-solar-scaled opacities compared to classical solar-scaled models. The differences in Teff, log g, and [Fe/H] amount to 26 K, 0.05 dex, and 0.020 dex for the stars in our sample. These differences can be considered the first estimation of the error due to the use of classical solar-scaled opacities to derive stellar parameters with solar-type and evolved stars. We note that some chemical species could also show an individual variation greater than those of the [Fe/H] (up to ~0.03 dex) and varying from one species to another, obtaining a chemical pattern difference between the two methods. This means that condensation temperature Tc trends could also present a variation. We include an example showing that using non-solar-scaled opacities, the solution found with the classical solar-scaled method indeed cannot always verify the excitation and ionization balance conditions required for a model atmosphere. We discuss in the text the significance of the differences obtained when using solar-scaled versus non-solar-scaled methods. Conclusions. We consider that the use of the non-solar-scaled opacities is not mandatory in every statistical study with large samples of stars. However, for those high-precision works whose results depend on the mutual comparison of different chemical species (such as the analysis of condensation temperature Tc trends), we consider its application to be worthwhile. To date, this is probably one of the most precise spectroscopic methods for stellar parameter derivation.


Sign in / Sign up

Export Citation Format

Share Document