Carbon footprint inventory route planning and selection of hot spot suppliers

2014 ◽  
Vol 150 ◽  
pp. 125-139 ◽  
Author(s):  
Tsai Chi Kuo ◽  
Gary Yu-Hsin Chen ◽  
Miao Ling Wang ◽  
Ming Way Ho
2019 ◽  
Vol 1 ◽  
pp. 1-2
Author(s):  
Pyry Kettunen

<p><strong>Abstract.</strong> Different types of geospatial pictures, such as maps and aerial imagery, have varying potential to provide spatial knowledge for the viewers. Our earlier review has assessed different common types of geopictures with regard to their support for acquiring different types of spatial knowledge (Kettunen et al., 2012). The assessment was based on previous literature about geopicture experiments as well as analytical itemization of the information available on the pictures as a function of picture characteristics, namely vantage point, number of visible vertical features, and visual realism. In addition to the actual assessment, the review concluded that there is an important shortage of empirical evaluations on spatial knowledge acquisition from geopictures, which lag we are addressing with the experiment described here.</p><p>The aim of the experiment is to find out what kind of geospatial features, or landmarks (see Presson and Montello, 1988; Richter and Winter, 2014), people read from geopictures, does reading differ between pictures, and how does it differ. For the experimental task, we chose a common map activity of planning navigation for walking through an urban route. The stimuli are five different types of common geopictures with both aerial vertical and aerial oblique vantage points as well as with both abstract and photorealistic levels of visual realism (Figure 1). Five routes are to be planned in different areas of city of Helsinki so that a different geopicture type is shown for each route. The pictures are shown as corridors surrounding the shortest walking route.</p><p>The participants have been recruited from expert and non-expert social media groups and e-mail lists, being called to be over 18 years old. The background questionnaire has asked about their age, gender, possible visual disorders, and frequency of use for each type of map in the experiment.</p><p>The experimental design for measuring the effect of geopicture type was built randomized and between-participants so that each participant completes series of five pictures, each of different type, in randomized order, and from different geographical areas. Two rounds of five pictures are shown: first, to measure the actual selection of landmarks, and second, to investigate the level of recall of the selected landmarks later. The procedure of the experiment is the following (Figure 2): 1) Introduction, 2) Consent to participate, 3) Training trial of the landmark selection task (1 picture), 4) Testing trials of the landmark selection task (5 pictures), 5) Training trial of the selection recall task (1 picture), 6) Testing trials of the landmark selection task (5 pictures), 7) Background questionnaire, and 8) Thanks and feedback. The Start and End points of the routes are drawn on the pictures (Figure 1) and the participants are asked to plan the shortest route between the points along roads and paths, to point 3–7 features along the route in navigation route for being able to navigate the route, and to enter common names for the features after pointing each feature. Response times, pointed coordinates, and feature names are recorded in order to analyze the participants’ answers.</p><p>The presentation at the ICC2019 conference will introduce preliminary results of the conducted experiment, reflect them on the previous studies on maps and routing and discuss their implications on the design of map contents from the viewpoint of route planning. The results will build empirical foundation about differences in reading of geospatial picture types, and for selecting appropriate features to be drawn on maps.</p>


2021 ◽  
pp. 130251
Author(s):  
Liu Bin ◽  
Li Jiawei ◽  
Chen Aiqiang ◽  
Panagiotis E. Theodorakis ◽  
Zhu Zongsheng ◽  
...  

2009 ◽  
Vol 21 (3) ◽  
pp. 239-251 ◽  
Author(s):  
M. Caramia ◽  
S. Giordani ◽  
A. Iovanella
Keyword(s):  

2014 ◽  
Vol 5 (2) ◽  
pp. 33-44
Author(s):  
Joanna Ochelska-Mierzejewska

Abstract The second most important function of a warehouse, apart from the storing of goods, is internal transport with a focus on time-effectiveness. When there is a time gap between the production and export of products, the goods need to be stored until they are dispatched to the consumers. An important problem that concerns both large and small warehouses is the selection of priorities, that is handling the tasks in order of importance. Another problem is to identify the most efficient routes for forklift trucks to transport goods from a start-point to a desired destination and prevent the routes from overlapping. In automated warehouses, the transport of objects (the so called pallets of goods) is performed by machines controlled by a computer instead of a human operator. Thus, it is the computer, not the man, that makes the difficult decisions regarding parallel route planning, so that the materials are transported within the warehouse in near-optimal time. This paper presents a method for enhancing this process.


2020 ◽  
Vol 12 (14) ◽  
pp. 5873
Author(s):  
Nur Fatma Fadilah Yaacob ◽  
Muhamad Razuhanafi Mat Yazid ◽  
Khairul Nizam Abdul Maulud ◽  
Noor Ezlin Ahmad Basri

This paper presents a review of carbon dioxide (CO2) emissions from transportation in an attempt to establish a quick and suboptimal update of the methods used to calculate and analyze CO2 emissions from transportation. Transportation is the largest contributor to air pollution through the release of high amounts of CO2 gas into the atmosphere. The methods for calculating and analyzing the carbon footprint of transportation; which is of critical importance in the management of greenhouse gases that contribute to global warming; are still being developed. However; there are some differences in the definitions and methods used to calculate the carbon footprint of transportation in previous studies. This review focuses on the similarities of the methods used to measure CO2 emissions as well as the analyses used to evaluate the emissions. This paper will also highlight the advantages and limitations of each research work. By doing this; the present study contributes to the selection of appropriate methods for calculating CO2 emissions from transportation and draws attention to environmental issues. It is hoped that the implementation of the most appropriate framework will help to reduce CO2 emissions from transportation


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
R. Klén ◽  
J. Teuho ◽  
T. Noponen ◽  
K. Thielemans ◽  
E. Hoppela ◽  
...  

Abstract Gating of positron emission tomography images has been shown to reduce the motion effects, especially when imaging small targets, such as coronary plaques. However, the selection of optimal number of gates for gating remains a challenge. Selecting too high number of gates results in a loss of signal-to-noise ratio, while too low number of gates does remove only part of the motion. Here, we introduce a respiratory-cardiac motion model to determine the optimal number of respiratory and cardiac gates. We evaluate the model using a realistic heart phantom and data from 12 cardiac patients (47–77 years, 64.5 on average). To demonstrate the benefits of our model, we compared it with an existing respiratory model. Based on our study, the optimal number of gates was determined to be five respiratory and four cardiac gates in the phantom and patient studies. In the phantom study, the diameter of the most active hot spot was reduced by 24% in the dual gated images compared to non-gated images. In the patient study, the thickness of myocardium wall was reduced on average by 21%. In conclusion, the motion model can be used for estimating the optimal number of respiratory and cardiac gates for dual gating.


2006 ◽  
Vol 203 (3) ◽  
pp. 661-673 ◽  
Author(s):  
Lars Kjer-Nielsen ◽  
Natalie A. Borg ◽  
Daniel G. Pellicci ◽  
Travis Beddoe ◽  
Lyudmila Kostenko ◽  
...  

Little is known regarding the basis for selection of the semi-invariant αβ T cell receptor (TCR) expressed by natural killer T (NKT) cells or how this mediates recognition of CD1d–glycolipid complexes. We have determined the structures of two human NKT TCRs that differ in their CDR3β composition and length. Both TCRs contain a conserved, positively charged pocket at the ligand interface that is lined by residues from the invariant TCR α- and semi-invariant β-chains. The cavity is centrally located and ideally suited to interact with the exposed glycosyl head group of glycolipid antigens. Sequences common to mouse and human invariant NKT TCRs reveal a contiguous conserved “hot spot” that provides a basis for the reactivity of NKT cells across species. Structural and functional data suggest that the CDR3β loop provides a plasticity mechanism that accommodates recognition of a variety of glycolipid antigens presented by CD1d. We propose a model of NKT TCR–CD1d–glycolipid interaction in which the invariant CDR3α loop is predicted to play a major role in determining the inherent bias toward CD1d. The findings define a structural basis for the selection of the semi-invariant αβ TCR and the unique antigen specificity of NKT cells.


This review article deals with the importance of process parameters and the recent developments in modern tool technology in the success of smart productivity for casting process of all types. Various influencing factors such as design, location and the number of gating on feeding mechanism were discussed vis-a-vis casting defects. The review revealed reduction in the defects such as air bubbles, blow holes, shrinkage defects and mechanical properties of the casting parts through selection of an optimum feeding design. Variations in fillet radius and thickness on the feeding system were found to be the factors affecting the location of the hot spot. Accordingly, the mobility of the hot spot was controlled by geometrical modifications in the feeding system. In addition, the formation of pinholes and solidification defects could be reduced through a proper arrangement of the feeding system. The rapid growth in implementing simulation techniques in the casting process can assist the enhancement of yield with minimum production cost. This article provides a data base relating to the merits and demerits of various factors and material systems with their industrial applications for enabling further research in the casting process


2003 ◽  
Vol 69 (8) ◽  
pp. 4448-4454 ◽  
Author(s):  
So-Young Kim ◽  
Jung-Hoon Sohn ◽  
Jung-Hoon Bae ◽  
Yu-Ryang Pyun ◽  
Michael O. Agaphonov ◽  
...  

ABSTRACT A high frequency of transformation and an equal gene dosage between transformants are generally required for activity-based selection of mutants from a library obtained by directed evolution. An efficient library construction method was developed by using in vivo recombination in Hansenula polymorpha. Various linear sets of vectors and insert fragments were transformed and analyzed to optimize the in vivo recombination system. A telomere-originated autonomously replicating sequence (ARS) of H. polymorpha, reported as a recombination hot spot, facilitates in vivo recombination between the linear transforming DNA and chromosomes. In vivo recombination of two linear DNA fragments containing the telomeric ARS drastically increases the transforming frequency, up to 10-fold, compared to the frequency of circular plasmids. Direct integration of the one-end-recombined linear fragment into chromosomes produced transformants with single-copy gene integration, resulting in the same expression level for the reporter protein between transformants. This newly developed in vivo recombination system of H. polymorpha provides a suitable library for activity-based selection of mutants after directed evolution.


2010 ◽  
Vol 157 (4) ◽  
pp. 749-767 ◽  
Author(s):  
Antonio Mendoza-Fernández ◽  
Francisco Javier Pérez-García ◽  
José Miguel Medina-Cazorla ◽  
Fabián Martínez-Hernández ◽  
Juan Antonio Garrido-Becerra ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document