Insight into Co concentrations effect on the structural, optical, and photoelectrochemical properties of ZnO rod arrays for optoelectronic applications

AbstractThere is a growing interest in obtaining high quality monolayer transition metal disulfides for optoelectronic applications. Surface treatments using a range of chemicals have proven effective to improve the photoluminescence yield of these materials. However, the underlying mechanism for the photoluminescence enhancement is not clear, which prevents a rational design of passivation strategies. Here, a simple and effective approach to significantly enhance the photoluminescence is demonstrated by using a family of cation donors, which we show to be much more effective than commonly used p-dopants. We develop a detailed mechanistic picture for the action of these cation donors and demonstrate that one of them, bis(trifluoromethane)sulfonimide lithium salt (Li-TFSI), enhances the photoluminescence of both MoS2 and WS2 to a level double that of the currently best performing super-acid trifluoromethanesulfonimide (H-TFSI) treatment. In addition, the ionic salts used in our treatments are compatible with greener solvents and are easier to handle than super-acids, providing the possibility of performing treatments during device fabrication. This work sets up rational selection rules for ionic chemicals to passivate transition metal disulfides and increases their potential in practical optoelectronic applications.

Download Full-text

Calibration problems in hydrogen luminosities

Symposium - International Astronomical Union ◽

10.1017/s0074180900053626 ◽

1966 ◽

Vol 24 ◽

pp. 322-330

Author(s):

A. Beer

Keyword(s):

Galactic Structure ◽

B Stars ◽

Insight Into

The investigations which I should like to summarize in this paper concern recent photo-electric luminosity determinations of O and B stars. Their final aim has been the derivation of new stellar distances, and some insight into certain patterns of galactic structure.

Download Full-text

Stochasting modeling of planetary ring systems

International Astronomical Union Colloquium ◽

10.1017/s025292110010154x ◽

1984 ◽

Vol 75 ◽

pp. 461-469 ◽

Cited By ~ 1

Author(s):

Robert W. Hart

Keyword(s):

Maximum Entropy ◽

Ring System ◽

The Sun ◽

Ultimate State ◽

Interparticle Interactions ◽

Ring Systems ◽

First Order ◽

Planetary Ring ◽

Insight Into

ABSTRACTThis paper models maximum entropy configurations of idealized gravitational ring systems. Such configurations are of interest because systems generally evolve toward an ultimate state of maximum randomness. For simplicity, attention is confined to ultimate states for which interparticle interactions are no longer of first order importance. The planets, in their orbits about the sun, are one example of such a ring system. The extent to which the present approximation yields insight into ring systems such as Saturn's is explored briefly.

Download Full-text

Skeletal elements of crinoid echinoderms: High-resolution structural and microanalytical results

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100074768 ◽

1983 ◽

Vol 41 ◽

pp. 194-195

Author(s):

D. F. Blake ◽

L. F. Allard ◽

D. R. Peacor

Keyword(s):

High Resolution ◽

Marine Invertebrates ◽

Sea Urchins ◽

Structural Features ◽

Sea Stars ◽

High Resolution Tem ◽

Relationship Of ◽

The Relationship ◽

Insight Into

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.

Download Full-text

Structure and function of neural networks in the retina

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100102213 ◽

1988 ◽

Vol 46 ◽

pp. 26-27

Author(s):

Peter Sterling

Keyword(s):

Ganglion Cells ◽

Three Dimensional ◽

Structure And Function ◽

Synaptic Connections ◽

Visual Axis ◽

One Dimensional ◽

Cat Retina ◽

Ultrathin Sections ◽

And Function ◽

Insight Into

The synaptic connections in cat retina that link photoreceptors to ganglion cells have been analyzed quantitatively. Our approach has been to prepare serial, ultrathin sections and photograph en montage at low magnification (˜2000X) in the electron microscope. Six series, 100-300 sections long, have been prepared over the last decade. They derive from different cats but always from the same region of retina, about one degree from the center of the visual axis. The material has been analyzed by reconstructing adjacent neurons in each array and then identifying systematically the synaptic connections between arrays. Most reconstructions were done manually by tracing the outlines of processes in successive sections onto acetate sheets aligned on a cartoonist's jig. The tracings were then digitized, stacked by computer, and printed with the hidden lines removed. The results have provided rather than the usual one-dimensional account of pathways, a three-dimensional account of circuits. From this has emerged insight into the functional architecture.

Download Full-text

Radiation Damage Studies with the HVEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096655 ◽

1972 ◽

Vol 30 ◽

pp. 680-681

Author(s):

J. J. Laidler ◽

B. Mastel

Keyword(s):

Radiation Damage ◽

Stainless Steels ◽

Volume Expansion ◽

Austenitic Stainless Steels ◽

Test Facility ◽

Fast Breeder Reactors ◽

Breeder Reactors ◽

Under Construction ◽

Development Laboratory ◽

Insight Into

One of the major materials problems encountered in the development of fast breeder reactors for commercial power generation is the phenomenon of swelling in core structural components and fuel cladding. This volume expansion, which is due to the retention of lattice vacancies by agglomeration into large polyhedral clusters (voids), may amount to ten percent or greater at goal fluences in some austenitic stainless steels. From a design standpoint, this is an undesirable situation, and it is necessary to obtain experimental confirmation that such excessive volume expansion will not occur in materials selected for core applications in the Fast Flux Test Facility, the prototypic LMFBR now under construction at the Hanford Engineering Development Laboratory (HEDL). The HEDL JEM-1000 1 MeV electron microscope is being used to provide an insight into trends of radiation damage accumulation in stainless steels, since it is possible to produce atom displacements at an accelerated rate with 1 MeV electrons, while the specimen is under continuous observation.

Download Full-text

Failure Analysis With the Scanning Electron Microscope

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100095662 ◽

1972 ◽

Vol 30 ◽

pp. 482-483

Author(s):

John R. Devaney

Keyword(s):

Electron Microscope ◽

Scanning Electron Microscope ◽

Integrated Circuits ◽

Failure Analysis ◽

High Reliability ◽

Military Applications ◽

Small Structure ◽

Useful Life ◽

Insight Into ◽

Scanning Electron

Occasionally in history, an event may occur which has a profound influence on a technology. Such an event occurred when the scanning electron microscope became commercially available to industry in the mid 60's. Semiconductors were being increasingly used in high-reliability space and military applications both because of their small volume but, also, because of their inherent reliability. However, they did fail, both early in life and sometimes in middle or old age. Why they failed and how to prevent failure or prolong “useful life” was a worry which resulted in a blossoming of sophisticated failure analysis laboratories across the country. By 1966, the ability to build small structure integrated circuits was forging well ahead of techniques available to dissect and analyze these same failures. The arrival of the scanning electron microscope gave these analysts a new insight into failure mechanisms.

Download Full-text