scholarly journals A diagnosis of construction and demolition waste generation and recovery practice in the European Union

2019 ◽  
Vol 241 ◽  
pp. 118400 ◽  
Author(s):  
Paola Villoria Sáez ◽  
Mohamed Osmani
Proceedings ◽  
2018 ◽  
Vol 2 (20) ◽  
pp. 1278
Author(s):  
Auxi Barbudo ◽  
Jesús Ayuso ◽  
Angélica Lozano ◽  
Manuel Cabrera ◽  
Antonio López-Uceda

Construction and demolition waste consists approximately of one third waste generated in the European Union. The recycling of this stream waste will provide ecological and sustainable benefits. Recycled aggregates from construction and demolition waste are clearing a path into civil constructions, as substitutes for natural aggregates. The possible applications of recycled aggregates on infrastructure construction projects will depend on the quality of the recycled aggregates mainly. This will be determined by the nature and the origin of the construction and demolition waste, and the treatment system undergone. Hence, this work proposes recommendations for the handling of construction and demolition waste in treatment plants.


2020 ◽  
Vol 38 (4) ◽  
pp. 415-422 ◽  
Author(s):  
KRA Nunes ◽  
CF Mahler

Construction and demolition waste represents a significant waste flow, both in Brazil and in other countries. According to specific Brazilian legislation, since 2004 construction and demolition waste can no longer be disposed of in open dumps, municipal solid waste landfills, slopes, waterways and environmental protected areas. Construction and demolition waste should preferably be recycled, but just a small amount of it returns to the construction industry production chain in Brazil. This work aims both to present diagnoses of the construction and demolition waste management in Brazil, the European Union and the United States and to compare their results. It is concluded that Brazil presents performance indicators in relation to construction and demolition waste management well below those found for the other analysed countries. Furthermore, differences and similarities are identified and potentials for improvement in the current situation of construction and demolition waste in Brazil are discussed.


Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.


Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2970 ◽  
Author(s):  
Clarence P. Ginga ◽  
Jason Maximino C. Ongpeng ◽  
Ma. Klarissa M. Daly

Construction and demolition waste (CDW) accounts for at least 30% of the total solid waste produced around the world. At around 924 million tons in the European Union in 2016 and 2.36 billion tons in China in 2018, the amount is expected to increase over the next few years. Dumping these wastes in sanitary landfills has always been the traditional approach to waste management but this will not be feasible in the years to come. To significantly reduce or eliminate the amount of CDW being dumped, circular economy is a possible solution to the increasing amounts of CDW. Circular economy is an economic system based on business models which replaces the end-of-life concept with reducing, reusing, recycling, and recovering materials. This paper discusses circular economy (CE) frameworks—specifically material recovery and production highlighting the reuse and recycling of CDW and reprocessing into new construction applications. Likewise, a literature review into recent studies of reuse and recycling of CDW and its feasibility is also discussed to possibly prove the effectivity of CE in reducing CDW. Findings such as effectivity of recycling CDW into new construction applications and its limitations in effective usage are discussed and research gaps such as reuse of construction materials are also undertaken. CE and recycling were also found to be emerging topics. Observed trends in published articles as well as the use of latent Dirichlet allocation in creating topic models have shown a rising awareness and increasing research in CE which focuses on recycling and reusing CDW.


2019 ◽  
Vol 95 ◽  
pp. 10-21 ◽  
Author(s):  
Rashidul Islam ◽  
Tasnia Hassan Nazifa ◽  
Adhi Yuniarto ◽  
A.S.M. Shanawaz Uddin ◽  
Salmiati Salmiati ◽  
...  

2011 ◽  
Vol 31 (4) ◽  
pp. 680-687 ◽  
Author(s):  
Weisheng Lu ◽  
Hongping Yuan ◽  
Jingru Li ◽  
Jane J.L. Hao ◽  
Xuming Mi ◽  
...  

2014 ◽  
Vol 955-959 ◽  
pp. 2727-2730
Author(s):  
Juan Liu ◽  
Yong Hai Xue ◽  
Ya Nan Yang

This research makes a tentative study on generation of construction and demolition waste (CDW) in the city of Tianjin. Based on statistic data on construction area, amounts of construction waste, renewal transformation waste and decoration waste are estimated respectively, and summed up to the result of total CDW generation from 1996 to 2012. It shows that total CDW generation in urban area of Tianjin is up to 19.11 million tons in 2012.


2016 ◽  
Vol 34 (12) ◽  
pp. 1224-1230 ◽  
Author(s):  
Chooi Mei Mah ◽  
Takeshi Fujiwara ◽  
Chin Siong Ho

Sign in / Sign up

Export Citation Format

Share Document