scholarly journals Predicting thickness impregnation in a VaRTM resin flow simulation using machine learning

2021 ◽  
pp. 100158
Author(s):  
Ryosuke Matsuzaki ◽  
Masato Morikawa ◽  
Yuya Oikawa ◽  
Kengo Ushiyama
2018 ◽  
Vol 50 (2) ◽  
pp. 655-671
Author(s):  
Tian Liu ◽  
Yuanfang Chen ◽  
Binquan Li ◽  
Yiming Hu ◽  
Hui Qiu ◽  
...  

Abstract Due to the large uncertainties of long-term precipitation prediction and reservoir operation, it is difficult to forecast long-term streamflow for large basins with cascade reservoirs. In this paper, a framework coupling the original Climate Forecasting System (CFS) precipitation with the Soil and Water Assessment Tool (SWAT) was proposed to forecast the nine-month streamflow for the Cascade Reservoir System of Han River (CRSHR) including Shiquan, Ankang and Danjiangkou reservoirs. First, CFS precipitation was tested against the observation and post-processed through two machine learning algorithms, random forest and support vector regression. Results showed the correlation coefficients between the monthly areal CFS precipitation (post-processed) and observation were 0.91–0.96, confirming that CFS precipitation post-processing using machine learning was not affected by the extended forecast period. Additionally, two precipitation spatio-temporal distribution models, original CFS and similar historical observation, were adopted to disaggregate the processed monthly areal CFS precipitation to daily subbasin-scale precipitation. Based on the reservoir restoring flow, the regional SWAT was calibrated for CRSHR. The Nash–Sutcliffe efficiencies for three reservoirs flow simulation were 0.86, 0.88 and 0.84, respectively, meeting the accuracy requirement. The experimental forecast showed that for three reservoirs, long-term streamflow forecast with similar historical observed distribution was more accurate than that with original CFS.


Author(s):  
Fatemeh Moazami Goudarzi ◽  
Amirpouya Sarraf ◽  
Hassan Ahmadi

Abstract In this study, the performance of SWAT hydrological model and three computational intelligence methods used to simulate river flow are investigated. After collecting the data required for all models used, the calibration and validation stages were performed. Using the SWAT model and three methods of the Extreme Machine Learning (EML), the Support Vector Regression (SVR), and the Least Squares Support Vector Regression (LSSVR), Maharlu Lake Basin stream flow was simulated and the results obtained at Shiraz station were used for this study. A noise reduction filter was employed to improve the results from the computational intelligence methods, and SUFI-2 algorithm was used to analyze the uncertainty of the SWAT model. Finally, in order to evaluate the models developed and the SWAT model, three statistics (RMSE), (R²), and (NS) coefficient were used. The results indicated that the SWAT model and the machine learning models were generally appropriate tools for daily flow modeling, but the LSSVR model showed less errors in both learning and testing, with the coefficients NS = 0.997 and R² = 0.997 in the calibration stage and NS = 0.994 and R² = 0.994 in the validation stage, which prove their better performance compared to the other methods and the SWAT model.


2013 ◽  
Vol 753-755 ◽  
pp. 221-224
Author(s):  
Rui Yang ◽  
Long Tao Li ◽  
Yan Xin Zhao

Based on the flow characteristics of resin in fiber perform, a simulation model considering distribution medium was developed, and impregnation of fiberglass reinforced resin matrix composites was numerically simulated. The fiberglass layer thickness on VIMP microscopic impregnation was analyzed in simulation. The results show that increasing fiberglass layer thickness can reduce the flow velocity of the resin and the resin flow front profile approximates a straight line type, so the fluctuation is small, and the final product has few dry spots; reducing the glass fiber layer thickness can improve wetting speed but resin flow front profile approximates a parabolic type, so the fluctuation is large, and the final product has more dry spots, the resin flow front profile can provide guidance for prediction and optimization of the infusion process.


2021 ◽  
Author(s):  
Tesfamariam M. Abuhay ◽  
◽  
Adane L. Mamuye ◽  
Stewart Robinson ◽  
Sergey V. Kovalchuk ◽  
...  

2021 ◽  
Author(s):  
Yanji Wang ◽  
Hangyu Li ◽  
Jianchun Xu ◽  
Ling Fan ◽  
Xiaopu Wang ◽  
...  

Abstract Conventional flow-based two-phase upscaling for simulating the waterflooding process requires the calculations of upscaled two-phase parameters for each coarse interface or block. The whole procedure can be greatly time-consuming especially for large-scale reservoir models. To address this problem, flow-based two-phase upscaling techniques are combined with machine learning algorithms, in which the flow-based two-phase upscaling is needed only for a small fraction of coarse interfaces (or blocks), while the upscaled two-phase parameters for the rest of the coarse interfaces (or blocks) are directly provided by the machine learning algorithms instead of performing upscaling computation on each coarse interfaces (or blocks). The new two-phase upscaling workflow was tested for generic (left to right) flow problems using a 2D large-scale model. We observed similar accuracy for results using the machine learning assisted workflow compared with the results using full flow-based upscaling. And significant speedup (nearly 70) is achieved. The workflow developed in this work is one of the pioneering work in combining machine learning algorithm with the time-consuming flow-based two-phase upscaling method. It is a valuable addition to the existing multiscale techniques for subsurface flow simulation.


2018 ◽  
Vol 2018.31 (0) ◽  
pp. 322
Author(s):  
Masaaki SUZUKI ◽  
Toshiyuki HARUHARA ◽  
Hiroyuki TAKAO ◽  
Takashi SUZUKI ◽  
Soichiro FUJIMURA ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document