Mechanical properties of YSt-310 cold-formed steel hollow sections at elevated temperatures

2019 ◽  
Vol 158 ◽  
pp. 53-70 ◽  
Author(s):  
Tekcham Gishan Singh ◽  
Konjengbam Darunkumar Singh
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Cold Formed Steel

scholarly journals Mechanical Properties of Steels for Cold-Formed Steel Structures at Elevated Temperatures

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Zhen Nie ◽  
Yuanqi Li ◽  
Yehua Wang
Keyword(s):  
Mechanical Properties ◽  
Material Properties ◽  
Elevated Temperatures ◽  
Elasticity Modulus ◽  
Mechanical Performance ◽  
Strain Curve ◽  
Steel Structures ◽  
Test Method ◽  
Stress Relieving ◽  
Cold Formed Steel

It is highly important to clarify the high-temperature mechanical properties in the design of cold-formed steel (CFS) structures under fire conditions due to the unique deterioration feature in material properties under fire environment and associated reduction to the mechanical performance of members. This paper presents the mechanical properties of widely used steels for cold-formed steel structures at elevated temperatures. The coupons were extracted from original coils of proposed full annealed steels (S350 and S420, with nominal yielding strengths 280 MPa and 350 MPa) and proposed stress relieving annealed steels (G500, with nominal yielding strength 500 MPa) for CFS structures with thickness of 1.0 mm and 1.2 mm, and a total of nearly 50 tensile tests were carried out by steady-state test method for temperatures ranging from 20 to 700°C. Based on the tests, material properties including the yield strengths, ultimate strengths, the elasticity modulus, and the stress-strain curve were obtained. Meanwhile, the ductility of steels for CFS structures was discussed. Then, the temperature-dependent retention factors of yield strengths and elasticity modulus were compared to those provided by design codes and former researchers. Finally, a set of prediction equations of the mechanical properties for steels for CFS structures at elevated temperatures was proposed depending on existing tests data.

scholarly journals Experimental investigation of the mechanical properties of ZAR-345 cold-formed steel at elevated temperatures

2014 ◽  
Vol 17 (4) ◽  
pp. 1082-1091 ◽  
Author(s):  
Alexandre Landesmann ◽  
Fernanda Cristina Moreira da Silva ◽  
Eduardo de Miranda Batista
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Elevated Temperatures ◽  
Cold Formed Steel

scholarly journals Mechanical properties of cold-formed steel tubular sections at elevated temperatures

2018 ◽  
Vol 143 ◽  
pp. 131-147 ◽  
Author(s):  
Mohamed Imran ◽  
Mahen Mahendran ◽  
Poologanathan Keerthan
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Cold Formed Steel ◽  
Tubular Sections

Mechanical Properties and Dislocation Structure of Single Crystal Cdte Deformed in Compression at 300°C

1976 ◽  
Vol 34 ◽  
pp. 592-593
Author(s):  
Ernest L. Hall ◽  
J. B. Vander Sande
Keyword(s):  
Mechanical Properties ◽  
Single Crystal ◽  
Dislocation Structure ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Strain Curve ◽  
Optical Devices ◽  
Semiconductor Compound ◽  
Wide Range ◽  
Sample Orientation

The present paper describes research on the mechanical properties and related dislocation structure of CdTe, a II-VI semiconductor compound with a wide range of uses in electrical and optical devices. At room temperature CdTe exhibits little plasticity and at the same time relatively low strength and hardness. The mechanical behavior of CdTe was examined at elevated temperatures with the goal of understanding plastic flow in this material and eventually improving the room temperature properties. Several samples of single crystal CdTe of identical size and crystallographic orientation were deformed in compression at 300°C to various levels of total strain. A resolved shear stress vs. compressive glide strain curve (Figure la) was derived from the results of the tests and the knowledge of the sample orientation.

CARLSON ALLOY C600 and C600 ESR

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Fracture Toughness ◽  
Cold Working ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Resistance To Oxidation ◽  
Good Workability

Abstract CARLSON ALLOYS C600 AND C600 ESR have excellent mechanical properties from sub-zero to elevated temperatures with excellent resistance to oxidation at high temperatures. It is a solid-solution alloy that can be hardened only by cold working. High strength at temperature is combined with good workability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-470. Producer or source: G.O. Carlson Inc.

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

NICROFER 6023

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
Heat Treating ◽  
Chemical Equipment ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Power Plant Equipment ◽  
Resistance To Oxidation ◽  
Plant Equipment

Abstract NICROFER 6023 is a nickel-chromium-iron alloy containing small quantities of aluminum. It has excellent resistance to oxidation at high temperatures, good resistance in oxidizing sulfur-bearing atmospheres and good resistance to carburizing conditions. The alloy has good mechanical properties at room and elevated temperatures. Its applications include heat treating furnace equipment, chemical equipment in various industries, and power plant equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-314. Producer or source: Vereingte Deutsche Metallwerke AG.

ESCO ALLOY 72

Alloy Digest ◽  
1966 ◽  
Vol 15 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Shock Resistance ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Corrosive Media ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Shock Resistance ◽  
Cobalt Base

Abstract ESCO Alloy 72 is a cobalt-base alloy having high corrosion, heat and thermal shock resistance. It is recommended for applications requiring good mechanical properties at elevated temperatures and/or in corrosive media. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-48. Producer or source: ESCO Corporation.

BERYLCO 25S

Alloy Digest ◽  
1952 ◽  
Vol 1 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Resistance ◽  
Subzero Temperatures ◽  
Endurance Strength ◽  
Wear And Corrosion ◽  
Resistance To Wear

Abstract Berylco 25S alloy is the high-performance beryllium-copper spring material of 2 percent nominal beryllium content. It responds to precipitation-hardening for maximum mechanical properties. It has high elastic and endurance strength, good electrical and thermal conductivity, excellent resistance to wear and corrosion, high corrosion-fatigue strength, good resistance to moderately elevated temperatures, and no embrittlement or loss of normal ductility at subzero temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-3. Producer or source: Beryllium Corporation.

Sign in / Sign up

Export Citation Format

Share Document