Creep behavior and model of high-strength steels over 500 MPa at elevated temperatures

2020 ◽  
Vol 168 ◽  
pp. 105989 ◽  
Author(s):  
Guo-Qiang Li ◽  
Xin-Xin Wang ◽  
Chao Zhang ◽  
Wen-Yu Cai
Keyword(s):  
Creep Behavior ◽  
Elevated Temperatures ◽  
High Strength Steels ◽  
High Strength

Investigation of EN AW 5754 Aluminum Alloy’s Formability at Elevated Temperatures

2017 ◽  
Vol 885 ◽  
pp. 98-103 ◽  
Author(s):  
Dávid Budai ◽  
Miklós Tisza ◽  
Péter Zoltán Kovács
Keyword(s):  
Elevated Temperatures ◽  
High Strength Steels ◽  
High Strength ◽  
Carbon Composite ◽  
Alloy Sheet ◽  
High Mass ◽  
Mass Reduction ◽  
Forming Process ◽  
Forming Temperature ◽  
Operating Distance

Nowadays, mass reduction is the most often used term in the automotive industry. Car manufacturers are continuously working on getting ever lighter models than the previous ones, because of the global competition and the rigorous emission rules. A light car has many advantages: lower consumption, better handling, longer operating distance, etc. The emission rules forced the car brands to start new researches to find new solutions for mass reduction. The formula is relatively simple, using lighter or less materials or both and the car will be lighter. In the recent solutions there are three different ways: application of high strength steels, aluminum alloys, and carbon-composite elements. Our investigations are focusing mainly on aluminum, because of its high mass reduction potential. The biggest problem with the aluminum is its low formability. The formability of aluminum is lower than the steel, and it causes problems for the manufacturers. To increase the formability of the aluminum is a hot topic in the research and development area. Forming at elevated temperatures is one of the best solutions to increase the formability of aluminum. The relation between the formability and the forming temperature is not linear, furthermore beyond the optimum forming temperature the formability decreases. We need dozens of investigations to describe the perfect relation, but sometimes a good approximation is enough to form sheet products safely. In our work we investigated the EN AW 5754 aluminum alloy sheet at room temperature, 130°C, 200°C and 260°C. From these tests we could obtain FLC curves of the alloy at different temperatures. Using these curves, the process engineers could find the optimum parameters of their forming process.

scholarly journals RESIDUAL STRENGTH OF STRUCTURAL STEELS: SN400, SM520 AND SM570

2016 ◽  
Author(s):  
In-Rak Choi ◽  
Kyung-Soo Chung
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
High Strength Steels ◽  
High Strength ◽  
Building Construction ◽  
Steel Plates ◽  
Seismic Resistance ◽  
Building Structures ◽  
Reliable Performance ◽  
Strength And Stiffness

<p>This paper presents post-fire mechanical properties of mild to high-strength steels commonly used in building structures in Korea. Steel is one of the main materials for building construction due to fast construction, light weight, and high seismic resistance. However, steel usually loses its strength and stiffness at elevated temperatures, especially over 600°C. But steel can regain some of its original mechanical properties after cooling down from the fire. Therefore, it is important to accurately evaluate the reliable performance of steel to reuse or repair the structures. For this reason, an experimental study was performed to examine the post-fire mechanical properties of steel plates SN400, SM520 and SM570 after cooling down from elevated temperatures up to 900°C. The post-fire stress-strain curves, elastic modulus, yield and ultimate strengths and residual factors were obtained and discussed.</p>

Elevated Temperature Properties of Maraging Steel Plates and Welds

1971 ◽  
Vol 93 (2) ◽  
pp. 218-224
Author(s):  
N. Kenyon ◽  
E. P. Sadowski ◽  
P. P. Hydrean
Keyword(s):  
Elevated Temperature ◽  
Maraging Steel ◽  
Elevated Temperatures ◽  
High Strength Steels ◽  
High Strength ◽  
Steel Plates ◽  
Maraging Steels ◽  
Gas Tungsten Arc ◽  
Temperature Exposure ◽  
Rupture Behavior

The creep rupture behavior, and the effects of elevated temperature exposure in air and hydrogen on the subsequent room temperature properties of a 12 percent Ni-5 percent Cr-3 percent Mo maraging steel are described. Tests have been made on several heats of plate and on gas tungsten-arc, gas metal-arc, and electroslag welds. On the basis of the results obtained, maraging steels offer promise as high-strength steels for service at elevated temperatures.

scholarly journals Post-fire mechanical properties of high strength steels

2018 ◽  
Author(s):  
Ben Young ◽  
Hai-Ting Li
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Ambient Temperature ◽  
High Strength Steel ◽  
Elevated Temperatures ◽  
Weight Ratio ◽  
High Strength Steels ◽  
High Strength ◽  
Predictive Equations ◽  
Retention Factors

High strength steels are becoming increasingly attractive for structural and architectural applications due to their superior strength-to-weight ratio which could lead to lighter and elegant structures. The stiffness and strength of high strength steels may reduce after exposure to fire. The post-fire mechanical properties of high strength steels have a crucial role in evaluating the residual strengths of these materials. This paper presents an experimental investigation on post-fire mechanical properties of cold-formed high strength steels. A series of tensile coupon tests has been carried out. The coupon specimens were extracted from cold-formed square hollow sections with nominal yield stresses of 700 and 900 MPa at ambient temperature. The specimens were exposed to various elevated temperatures ranged from 200 to 1000 °C and then cooled down to ambient temperature before tested to failure. Stress-strain curves were obtained and the mechanical properties, namely, Young’s modulus, yield stress (0.2% proof stress) and ultimate strength, of the cold-formed high strength steel materials after exposure to elevated temperatures were derived. The post-fire retention factors that obtained from the experimental investigation were compared with existing predictive equations in the literature. New predictive equations are proposed to determine the residual mechanical properties of high strength steels after exposure to fire. It is shown that the proposed predictive equations are suitable for both cold-formed and hot-rolled high strength steel materials with nominal yield stresses ranged from 690 to 960 MPa.

Comparison of Material Behavior and Economic Effects of Cold and High Temperature Forming Technologies Applied to High-Strength Steels

2005 ◽  
Vol 6-8 ◽  
pp. 101-108 ◽  
Author(s):  
Reimund Neugebauer ◽  
Angela Göschel ◽  
Andreas Sterzing ◽  
Petr Kurka ◽  
Michael Seifert
Keyword(s):  
Elevated Temperatures ◽  
High Strength Steels ◽  
Dimensional Accuracy ◽  
High Strength ◽  
Economic Effects ◽  
Material Behavior ◽  
Spring Back ◽  
Forming Process ◽  
Cold Forming ◽  
Forming Tools

The focus of forming high-strength steel at elevated temperature is to improve its forming properties like elongation and to reduce the power requirements during the forming process in opposite to cold forming. Because of the undefined and large spring-back effects parts made by cold forming are not able to achieve the demanded dimensional accuracy, which is necessary for laser welding operations in car body assembly. The reduction of the spring-back behavior is another advantage of the temperature controlled forming technology. On the other side the forming at elevated temperatures requires increased costs for forming tools and tempering equipment. For a fundamental evaluation of this technology, expenditures for the complete process chain have to be considered.

Consideration of Elastic Tool Deformation in Numerical Simulation of Hydroforming with Granular Material Used as a Medium

2011 ◽  
Vol 473 ◽  
pp. 707-714 ◽  
Author(s):  
Martin Grüner ◽  
Marion Merklein
Keyword(s):  
Numerical Simulation ◽  
Granular Material ◽  
Elevated Temperatures ◽  
High Strength Steels ◽  
High Strength ◽  
Appropriate Technology ◽  
The Body ◽  
Warm Forming ◽  
Forming Process ◽  
Blank Holder

The use of high and ultra high strength steels in modern bodies in white raises steadily since the 1980’s. This trend is caused by the consumers’ wish of low fuel consuming cars with an increased passenger’s safety. The processing of these steels brings new challenges e.g. high flow stresses and a low formability at room temperature or high tool loads. These challenges can be resolved by warm forming at temperatures up to 600 °C reducing the flow stresses and increasing formability. For the production of complex parts that can not be produced by deep drawing hydroforming is an appropriate technology which can also help to reduce the number of parts and thus the weight of the body in white. Nowadays typical fluids used for hydroforming are only temperature stable up to about 330 °C so that it is not possible to combine the benefits of warm forming and hydroforming. Media like gases and fluids tend to leakage during the process which can only be avoided by a sealing or high blank holder forces. A new approach is the use of ceramic beads as medium for hydroforming at elevated temperatures. Building up a heatable tool for hydroforming with granular material used as medium makes it necessary to consider thermal conductivity so that there is a need of thick insulation plates. These insulation plates show high elastic deformations affecting the blank holder forces during the forming process. Measurements of the compressibility of these plates and implementation in numerical simulation allow a significant increase of the prediction accuracy of the model. A comparison of real part geometry and numerical results from models with and without consideration of elastic deformation will be given.

scholarly journals Creep Behavior of High-Strength Concrete Subjected to Elevated Temperatures

Materials ◽  
2017 ◽  
Vol 10 (7) ◽  
pp. 781 ◽  
Author(s):  
Minho Yoon ◽  
Gyuyong Kim ◽  
Youngsun Kim ◽  
Taegyu Lee ◽  
Gyeongcheol Choe ◽  
...  
Keyword(s):  
Creep Behavior ◽  
High Strength Concrete ◽  
Elevated Temperatures ◽  
High Strength ◽  
Strength Concrete

Mechanical Behaviour of Ceramic Beads Used as Medium for Hydroforming at Elevated Temperatures

2009 ◽  
Vol 410-411 ◽  
pp. 61-68 ◽  
Author(s):  
Marion Merklein ◽  
Martin Grüner
Keyword(s):  
Granular Material ◽  
Elevated Temperatures ◽  
Exhaust System ◽  
High Strength Steels ◽  
High Strength ◽  
Compression Direction ◽  
High Efficient ◽  
Hydroforming Process ◽  
Ultra High Strength Steels

The need of light weight construction for high efficient vehicles leads to the use of new materials like aluminium and magnesium alloys or high strength and ultra high strength steels. At elevated temperatures the formability of steel increases as the flow stresses decrease. Forming high complex geometries like chassis components or components of the exhaust system of vehicles can be done by hydroforming. The hydroforming process by oils is limited to temperatures of approximately 300 °C and brings disadvantages of possible leakage and fouling. Using granular material like small ceramic beads as medium could be an approach for hydroforming of ultra high strength steels like MS W1200 and CP W800 at temperatures up to 600 °C. The material properties of granular material are in some points similar to solid bodies, in other points similar to liquids. For understanding and simulation of the behaviour of the medium a basic characterisation of ceramic beads with different ball diameters is necessary. Powder mechanics and soil engineering give ideas for experimental setups. For the conversion of these approaches on the one hand the behaviour of the ceramic beads itself has to be characterized, on the other hand the contact between a blank and the beads have to be investigated. For the tests three different kinds of spheres with a diameter between 63 microns and 850 microns are used. In unidirectional compression test compressibility, pressure distribution in compression direction and transversal compression direction and the effect of bead fracture are investigated. The tests are carried out at different compression velocities and for multiple compressions. For determination of friction coefficients between blank and beads and determination of shear stress in bulk under compression a modified Jenike-Shear-Cell for use in universal testing machines with the possibility of hydraulic compression of the beads is built up. The gained data can be used for material modelling in ABAQUS using Mohr-Coulomb or Drucker-Prager model.

Sign in / Sign up

Export Citation Format

Share Document