Landfill leachate treatment by electrocoagulation: Effects of current density and electrolysis time

2020 ◽  
Vol 8 (5) ◽  
pp. 104368
Author(s):  
Neanderson Galvão ◽  
Jeanette Beber de Souza ◽  
Carlos Magno de Sousa Vidal
Keyword(s):  
Current Density ◽  
Landfill Leachate ◽  
Electrolysis Time ◽  
Leachate Treatment

Application of the central composite design for condition optimization for semi-aerobic landfill leachate treatment using electrochemical oxidation

2010 ◽  
Vol 61 (5) ◽  
pp. 1257-1266 ◽  
Author(s):  
Soraya Mohajeri ◽  
Hamidi Abdul Aziz ◽  
Mohamed Hasnain Isa ◽  
Mohammad Ali Zahed ◽  
Mohammed J. K. Bashir ◽  
...  
Keyword(s):  
Reaction Time ◽  
Central Composite Design ◽  
Electrochemical Oxidation ◽  
Current Density ◽  
Landfill Leachate ◽  
Electrolyte Concentration ◽  
Process Conditions ◽  
Leachate Treatment ◽  
Condition Optimization ◽  
Central Composite

In the present study, Electrochemical Oxidation was used to remove COD and color from semi-aerobic landfill leachate collected from Pulau Burung Landfill Site (PBLS), Penang, Malaysia. Experiments were conducted in a batch laboratory-scale system in the presence of NaCl as electrolyte and aluminum electrodes. Central composite design (CCD) under Response surface methodology (RSM) was applied to optimize the electrochemical oxidation process conditions using chemical oxygen demand (COD) and color removals as responses, and the electrolyte concentrations, current density and reaction time as control factors. Analysis of variance (ANOVA) showed good coefficient of determination (R2) values of >0.98, thus ensuring satisfactory fitting of the second-order regression model with the experimental data. In un-optimized condition, maximum removals for COD (48.77%) and color (58.21%) were achieved at current density 80 mA/cm2, electrolyte concentration 3,000 mg/L and reaction time 240 min. While after optimization at current density 75 mA/cm2, electrolyte concentration 2,000 mg/L and reaction time 218 min a maximum of 49.33 and 59.24% removals were observed for COD and color respectively.

Landfill leachate treatment using the sequencing batch biofilm reactor method integrated with the electro-Fenton process

2014 ◽  
Vol 68 (6) ◽  
Author(s):  
Dao-Bin Zhang ◽  
Xiao-Gang Wu ◽  
Yi-Si Wang ◽  
Hui Zhang
Keyword(s):  
Landfill Leachate ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Biological Oxygen Demand ◽  
Biofilm Reactor ◽  
Electrolysis Time ◽  
Fenton Process ◽  
Optimal Conditions ◽  
Leachate Treatment ◽  
Sequencing Batch Biofilm Reactor

AbstractA study was conducted on the treatment of landfill leachate by combining the sequencing batch biofilm reactor (SBBR) method with the electro-Fenton method. The reduction of chemical oxygen demand (COD), biological oxygen demand (BOD5), and ammonia nitrogen (NH4+-N) from the leachate by the SBBR method was investigated. For the electro-Fenton experiment, the changes in COD and total organic carbon (TOC) with the increase in H2O2 dosage and electrolysis time under optimal conditions were also analysed. The results showed that the average efficiencies of reduction of COD, BOD5, and NH4+ -N achieved using the SBBR method were 21.6 %, 54.7 %, and 56.1 %, respectively. The bio-effluent was degraded by the subsequent electro-Fenton process, which was rapid over the first 30 min then subsequently slowed. After 60 min of the electro-Fenton treatment, the efficiencies of reduction of TOC, COD, and BOD5 were 40.5 %, 71.6 %, and 61.0 %, respectively. There is a good correlation between the absorbance of leachate at 254 nm (UV254) and COD or TOC during the electro-Fenton treatment.

scholarly journals Investigating the Electrocoagulation Treatment of Landfill Leachate by Iron/Graphite Electrodes: Process Parameters and Efficacy Assessment

Water ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 205
Author(s):  
Tahereh Rookesh ◽  
Mohammad Reza Samaei ◽  
Saeed Yousefinejad ◽  
Hassan Hashemi ◽  
Zahra Derakhshan ◽  
...  
Keyword(s):  
Current Density ◽  
Landfill Leachate ◽  
Performance Indicators ◽  
Oxygen Demand ◽  
Cost Effective ◽  
Leachate Treatment ◽  
Graphite Electrodes ◽  
Electrode Distance ◽  
Electrocoagulation Process ◽  
Efficacy Assessment

Electrocoagulation is a widely used method for treating leachate since it is cost effective and eco-friendly. In the present study, the electrocoagulation process was employed to remove chemical oxygen demand (COD), NH4+, total dissolved solids (TDS), total suspended solids (TSS), turbidity, and color from landfill leachate. At first, lime was used as a pretreatment, then the Fe/Gr and Ti/PbO2/steel electrodes were used, and the optimum electrode was selected. Afterwards, the effects of some variables, including pH, current density, temperature, the inter-electrode distance, and the type of electrolyte were investigated. Results showed that COD, NH4+, TSS, TDS, electrical conductivity (EC), turbidity, color, and pH of effluent pretreatment chemical reached 22,371, 385, 884, 21,820 (mg/L), 13.8 (ms/cm3), 1355 (NTU), 8500 (TCU) and 10, respectively (the removal efficiency was 0, 20.37, 32.4, 61.99, 59.18, and 56.6 percent). With the Fe/Gr electrode, the optimal condition was observed as follows: pH of 7.5, current density of 64 mA/cm2, inter-electrode distance was equal to 1.5 cm, temperature at 20 °C, and retention time 2–4 h. Overall, the electrocoagulation with the Fe/Gr electrode was a suitable technology for landfill leachate treatment due to its effectiveness for the removal of both COD and NH4+, with advantageous performance indicators.

scholarly journals Electrocoagulation Treatment for Removal of Color and Chemical Oxygen Demand in Landfill Leachate using Aluminum Electrode

2019 ◽  
Vol 8 (4) ◽  
pp. 89-92
Keyword(s):  
Chemical Oxygen Demand ◽  
Landfill Leachate ◽  
Applied Voltage ◽  
Research Work ◽  
Oxygen Demand ◽  
Experimental Result ◽  
Aluminum Electrode ◽  
Electrolysis Time ◽  
Leachate Treatment ◽  
Electrode Distance

The present research work mainly deals with the removal percentage of Color and Chemical Oxygen Demand (COD) on landfill leachate by using electrocoagulation (EC) process. An EC process was carried out with an aluminium electrode and it act as both anode and cathode. The study mainly targets the factors affecting on electrode material, electrolysis time, initial pH, applied voltage, inter-electrode distance. The experimental result reveals that there was raise in BOD/COD ratio from 0.11 to 0.66 and the maximum percentage removal achieved were COD and Color 78.4% and 77.0% respectively. The optimum inter-electrode distance 1cm with electrode surface area 35 cm2 and optimum electrolysis time of 90 min at optimum applied voltage 10V, stirring speed 250 rpm and pH is 9.3. These results showed that the EC process is appropriate and well-organized approach for the landfill leachate treatment.

scholarly journals Application of Electrocoagulation with a New Steel-Swarf-Based Electrode for the Removal of Heavy Metals and Total Coliforms from Sanitary Landfill Leachate

2021 ◽  
Vol 11 (11) ◽  
pp. 5009
Author(s):  
Mayk Teles de Oliveira ◽  
Ieda Maria Sapateiro Torres ◽  
Humberto Ruggeri ◽  
Paulo Scalize ◽  
Antonio Albuquerque ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Landfill Leachate ◽  
Lower Cost ◽  
Sanitary Landfill ◽  
Leachate Treatment ◽  
Removal Of Heavy Metals ◽  
Waste Characteristics ◽  
Electrode Passivation ◽  
Steel Swarf ◽  
Sanitary Landfill Leachate

Sanitary landfill leachate (LL) composition varies according to climate variables variation, solid waste characteristics and composition, and landfill age. Leachate treatment is essentially carried out trough biological and physicochemical processes, which have showed variability in efficiency and appear a costly solution for the management authorities. Electrocoagulation (EC) seems a suitable solution for leachate treatment taking into account the characteristics of the liquor. One of the problems of EC is the electrode passivation, which affects the longevity of the process. One solution to this problem could be the replacement of the electrode by one made of recyclable material, which would make it possible to change it frequently and at a lower cost. The objective of the present work was to evaluate the removal of heavy metals (As, Ba, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Se and Zn) and coliforms from a LL by EC using electrodes made from steel swarf (SfE) up to 8 h. Removal efficiencies of detected heavy metals were 51%(Cr), 59%(As), 71%(Cd), 72%(Zn), 92%(Ba), 95%(Ni) and >99%(Pb). The microbial load of coliforms in leachate was reduced from 10.76 × 104 CFU/mL (raw leachate) to less than 1 CFU/mL (after treatment with SfE) (i.e., approximately 100% reduction). The use of SfE in EC of LL is very effective in removing heavy metals and coliforms and can be used as alternative treatment solution for such effluents.

The evolving trends of landfill leachate treatment research over the past 45 years

2021 ◽  
Author(s):  
Mir Amir Mohammad Reshadi ◽  
Sajad Soleymani Hasani ◽  
Morteza Nazaripour ◽  
Gordon McKay ◽  
Alireza Bazargan
Keyword(s):  
Landfill Leachate ◽  
Leachate Treatment ◽  
The Past ◽  
Treatment Research

scholarly journals Characterizing Seasonal Variation in Landfill Leachate Using Leachate Pollution Index (LPI) at Nam Son Solid Waste Landfill in Hanoi, Vietnam

Environments ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 17
Author(s):  
Son Tran Hoai ◽  
Huong Nguyen Lan ◽  
Nga Tran Thi Viet ◽  
Giang Nguyen Hoang ◽  
Ken Kawamoto
Keyword(s):  
Environmental Pollution ◽  
Landfill Leachate ◽  
Pollution Index ◽  
Temporal Variations ◽  
Inorganic Pollutants ◽  
Landfill Leachates ◽  
Leachate Treatment ◽  
Waste Landfill ◽  
Permissible Limits ◽  
Leachate Pollution Index

The improper treatment of landfill leachates is one of the major problems associated with waste landfilling and causes serious environmental pollution at waste landfill sites and their surroundings. To develop a suitable landfill leachate treatment system and to minimize the risk of environmental pollution, it is important to characterize seasonal and temporal variations of landfill leachates. This study investigated the leachate quality of the Nam Son waste landfill in Hanoi, Vietnam in 2017–2019 and characterized the potential risks of landfill leachate using a leachate pollution index (LPI). The results of this study showed that the seasonal and temporal variation of the overall LPI during the monitoring period was small and in the range of 20–25 (values 2.5 times higher than the maximum permissible limits of Vietnam National Technical Regulation on Industrial Wastewater). The LPI sub-indices attributed to organic and inorganic pollutants were major components of the LPI. Especially, the annually averaged values of LPI of inorganic pollutants were 7.7 times higher than the maximum permissible limits, suggesting that the treatment of inorganic pollutants, such as ammonium-nitrogen (NH4+–N) and total nitrogen (TN), is highly required at Nam Son landfill to prevent environmental pollution surrounding the landfill site.

Sign in / Sign up

Export Citation Format

Share Document