Development of bioactive catechol functionalized nanoparticles applicable for 3D bioprinting

Background: Herbicides are very beneficial in the crop yield with the aid of controlling weeds within the agriculture, but several herbicides are chronic in soil. Objective: In this study, nanoparticles and the packages of synthesized novel silica nanoparticles were studied for the preconcentration of herbicides. Methods: These nanoparticles prepared by the Stöber mechanism were purified and functionalized. Nanoparticles thus prepared successfully were used as supporting material for the preconcentration of residues of herbicides in the water. Results: Preconcentration was achieved by preparing the silica-based solid-phase-extraction cartridges. Nanoparticles used for this purpose were within the range of 50-250 nm. An SPE cartridge was prepared by packing 200 mg of silica nanoparticle in the empty cartridge of diameter 5.5 cm and length 0.6 cm in between PTFE frits. Aqueous solutions of 0.1 μg/ml of herbicides were prepared separately, and 10 ml of the solution was passed through the cartridge at the rate of 0.2 ml/min. After passing 10 ml volume of the aqueous solution, residues adsorbed on the cartridge were eluted using 2 ml of acetonitrile. The eluate was injected to determine the herbicide residue adsorbed on the SPE cartridge. Conclusion: In the study, it was found that greater than 90% of the herbicide residues were trapped on silica nanoparticle-based SPE cartridge. An analytical method was developed for the simultaneous determination of these herbicides. The residues were quantified by LC-MS/MS with ESI mode.

Download Full-text

Motility Improvement of Biomimetic Trachea Scaffold via Hybrid 3D-Bioprinting Technology

Polymers ◽

10.3390/polym13060971 ◽

2021 ◽

Vol 13 (6) ◽

pp. 971

Author(s):

Young Soo Yu ◽

Chi Bum Ahn ◽

Kuk Hui Son ◽

Jin Woo Lee

Keyword(s):

Rotation Angle ◽

Thick Layer ◽

Cartilage Tissue ◽

Soft Tissue Reconstruction ◽

3D Bioprinting ◽

Rotating Beam ◽

Rotational Angle ◽

Gelatin Hydrogel ◽

Tissue Reconstruction ◽

Neck Rotation

A trachea has a structure capable of responding to various movements such as rotation of the neck and relaxation/contraction of the conduit due to the mucous membrane and cartilage tissue. However, current reported tubular implanting structures are difficult to impelement as replacements for original trachea movements. Therefore, in this study, we developed a new trachea implant with similar anatomical structure and mechanical properties to native tissue using 3D printing technology and evaluated its performance. A 250 µm-thick layer composed of polycaprolactone (PCL) nanofibers was fabricated on a rotating beam using electrospinning technology, and a scaffold with C-shaped cartilage grooves that mimics the human airway structure was printed to enable reconstruction of cartilage outside the airway. A cartilage type scaffold had a highest rotational angle (254°) among them and it showed up to 2.8 times compared to human average neck rotation angle. The cartilage type showed a maximum elongation of 8 times higher than that of the bellows type and it showed the elongation of 3 times higher than that of cylinder type. In cartilage type scaffold, gelatin hydrogel printed on the outside of the scaffold was remain 22.2% under the condition where no hydrogel was left in other type scaffolds. In addition, after 2 days of breathing test, the amount of gelatin remaining inside the scaffold was more than twice that of other scaffolds. This novel trachea scaffold with hydrogel inside and outside of the structure was well-preserved under external flow and is expected to be advantageous for soft tissue reconstruction of the trachea.

Download Full-text

A 3D Bioprinted Material That Recapitulates the Perivascular Bone Marrow Structure for Sustained Hematopoietic and Cancer Models

Polymers ◽

10.3390/polym13040480 ◽

2021 ◽

Vol 13 (4) ◽

pp. 480

Author(s):

Caitlyn A. Moore ◽

Zain Siddiqui ◽

Griffin J. Carney ◽

Yahaira Naaldijk ◽

Khadidiatou Guiro ◽

...

Keyword(s):

Breast Cancer ◽

Bone Marrow ◽

Translational Medicine ◽

Drug Response ◽

Drug Approval ◽

3D Models ◽

3D Bioprinting ◽

Effective Evaluation ◽

Experimental Systems ◽

Cancer Models

Translational medicine requires facile experimental systems to replicate the dynamic biological systems of diseases. Drug approval continues to lag, partly due to incongruencies in the research pipeline that traditionally involve 2D models, which could be improved with 3D models. The bone marrow (BM) poses challenges to harvest as an intact organ, making it difficult to study disease processes such as breast cancer (BC) survival in BM, and to effective evaluation of drug response in BM. Furthermore, it is a challenge to develop 3D BM structures due to its weak physical properties, and complex hierarchical structure and cellular landscape. To address this, we leveraged 3D bioprinting to create a BM structure with varied methylcellulose (M): alginate (A) ratios. We selected hydrogels containing 4% (w/v) M and 2% (w/v) A, which recapitulates rheological and ultrastructural features of the BM while maintaining stability in culture. This hydrogel sustained the culture of two key primary BM microenvironmental cells found at the perivascular region, mesenchymal stem cells and endothelial cells. More importantly, the scaffold showed evidence of cell autonomous dedifferentiation of BC cells to cancer stem cell properties. This scaffold could be the platform to create BM models for various diseases and also for drug screening.

Download Full-text

3D-Bioprinting Strategies Based on In Situ Bone-Healing Mechanism for Vascularized Bone Tissue Engineering

Micromachines ◽

10.3390/mi12030287 ◽

2021 ◽

Vol 12 (3) ◽

pp. 287

Author(s):

Ye Lin Park ◽

Kiwon Park ◽

Jae Min Cha

Keyword(s):

Tissue Engineering ◽

Bone Tissue Engineering ◽

Bone Tissue ◽

Bone Healing ◽

Critical Size ◽

Current Knowledge ◽

3D Bioprinting ◽

The Past ◽

Regeneration Processes

Over the past decades, a number of bone tissue engineering (BTE) approaches have been developed to address substantial challenges in the management of critical size bone defects. Although the majority of BTE strategies developed in the laboratory have been limited due to lack of clinical relevance in translation, primary prerequisites for the construction of vascularized functional bone grafts have gained confidence owing to the accumulated knowledge of the osteogenic, osteoinductive, and osteoconductive properties of mesenchymal stem cells and bone-relevant biomaterials that reflect bone-healing mechanisms. In this review, we summarize the current knowledge of bone-healing mechanisms focusing on the details that should be embodied in the development of vascularized BTE, and discuss promising strategies based on 3D-bioprinting technologies that efficiently coalesce the abovementioned main features in bone-healing systems, which comprehensively interact during the bone regeneration processes.

Download Full-text