Structural control of a fixed offshore structure using a new developed tuned liquid column ball gas damper (TLCBGD)

2019 ◽  
Vol 192 ◽  
pp. 106551 ◽  
Author(s):  
Hamid Hokmabady ◽  
Alireza Mojtahedi ◽  
Samira Mohammadyzadeh ◽  
Mir Mohammad Ettefagh
Author(s):  
Markus Hochrainer ◽  
Franz Ziegler

Tuned liquid column damper (TLCD) show excellent energy and vibration absorbing capabilities appropriate for applications in wind- and earthquake engineering. The objective of this chapter is to demonstrate the outstanding features of the proposed Tuned Liquid Column Gas Damper (TLCGD) and present its wide spectrum of applications of three design alternatives. Among others it includes base isolation of structures, applications to lightly damped asymmetric buildings and other vibration prone structures like bridges (even under traffic loads) and large arch-dams as well as simple, ready to use design guidelines for optimal absorber placement and tuning. The evident features of TLCGDs are no moving mechanical parts, cheap and easy implementation into civil engineering structures, simple modification of the natural frequency and even of the damping properties, low maintenance costs, little additional weight in those cases where a water reservoir is required, e.g., for the sake of fire fighting, and a performance comparable to that of TMDs of the spring-mass- (or pendulum-)-dashpot type.


2021 ◽  
Author(s):  
Satheesh Jothinathan ◽  
Deepak Kumar

Abstract Jacket structures are one of the most important offshore structures for extracting oil and gas. The fatigue life is affected due to the continuous dynamic wave force experienced by the structure. Generally, the structure is designed so that the dynamic response is small, which increases the cost. So, controlling its response is a good alternative to increase its life span. In this work, a simplified jacket structure under a random sea state is controlled for its response using a tuned liquid column ball gas damper (TLCBGD). The jacket structure in a water depth of 60m is modeled in a surge degree of freedom. The parameters of TLCBGD are optimized using a genetic algorithm for achieving better control in response quantities. For the analysis purpose, the wave is considered stochastic and presented by Pierson–Moskowitz (PM) spectrum of significant wave height 10m. In such a case, the jacket structure response can be presented using the root mean square (RMS) values obtained from the Lyapunov technique. Based on the random vibration analysis theory, the Lyapunov method can be employed to obtain the RMS of the system driven directly without solving the governing differential equation. This method requires the system to be driven by white noise. So, in this study, filters are developed to get the required narrow banded ocean spectrum. It is noticed that the response quantity is highly sensitive to the filter parameters. This is because a slight change in excitation parameters and a change in filter parameters near the system’s natural frequency affect the response significantly. Further, it is seen that the use of the genetic algorithm for tuning the TLCBGD gives very good control on the response quantity of the jacket structure.


2021 ◽  
pp. 136943322110369
Author(s):  
Fereidoun Amini ◽  
Nazanin Nazmdar Shahri

Liquid column dampers are adjusted based on the characteristics of the host structure and the type of external forces. It is assumed in most studies that the structure is rigidly connected to the ground, and the characteristics of the structure are invariant during external excitations. The performance of passive dampers may lose, or structural displacements may be increased by changing these conditions. This study presented a new method to find the optimal control forces for structures equipped with smart tuned liquid column gas damper (TLCGDs), considering variable characteristics of the structure and the soil–structure interaction. The proposed method calculates the gas pressure inside the columns by regularly adjusting and updating the frequency and damping of the TLCGD. The unknown or changed soil–structure characteristics are estimated by a system identification method, and damper parameters are determined through an optimization algorithm. The method was tested on 3- 9- and 10-story shear buildings under harmonic and earthquake excitation. According to the results, the smart damper more effectively reduced the structural displacement.


2010 ◽  
Vol 163-167 ◽  
pp. 3461-3464
Author(s):  
Chuan Fu

This paper examines the effectiveness of the Active Tuned Liquid Column Gas Damper (ATLCGD) when equipped on the plan-asymmetric structures subjected to earthquake excitation. The active behaviour is obtained by adjusting the pressure at the end of the liquid column using a pressurised reservoir. The classical linear quadratic regulator (LQR) control strategy is applied to determine optimal control force of the ATLCGDs. A case study of a four-storey asymmetric structure is conducted to illustate excellent control efficacy of the proposed active TLCGD control system.


2021 ◽  
Author(s):  
Behnam Mehrkian ◽  
Okyay Altay

As a well-known and reliable control device, tuned liquid column dampers (TLCDs) have been investigated numerically and experimentally and implemented in a number of structures over the last three decades. However, TLCDs basically suffer from the lack of multidirectionality, which is the critical need for real structures, in particular under random vibrations such as wind and earthquake excitations. This aspect has garnered the attention of the structural control community to modify this promising damper to achieve more efficiency and to extend its application range to multidirectional vibrations. This paper proposes a mathematical modeling and optimization approach for omnidirectional tuned liquid column dampers (O-TLCDs). As an improved and reformed TLCD, O-TLCDs are formed by circularly distributed of n ≥ 3 L-arms about a common joint point at the center, through which all L-arms are connected to each other. Thanks to this layout, O-TLCDs can control structures with full counteracting force capacity in all transversal directions regardless of the excitation angle of incidence. This paper, in the first step, proposes the governing equation of motion of O-TLCDs, for which Lagrange’s principle is employed, and the equation of motion of the coupled O-TLCD-structure system. In doing so, a formal solution to determine the degree of freedom (DoF) of the O-TLCD is introduced, which proves independence of the O-TLCD response from the number of L-arms as well as from the angle of excitations. Second, for designing O-TLCDs, a set of design criteria and a general optimization scheme, which accommodate the online simulation of coupled O-TLCD-structure system under arbitrary excitations, are proposed. Consequently, without adding extra complication coming from extra DoFs to the motion equation of the damper, the O-TLCD functions as an enhanced liquid damper for multidirectional vibration attenuation. Next, using the O-TLCDs designed with different mass ratios, numerical simulations of O-TLCD-structure systems are conducted under seismic loads, free vibration, harmonic excitation and white noise and the controlled and uncontrolled responses of the systems are assessed in the time and the frequency domain. Here, the role of important parameters such as the mass ratio, the head loss coefficient, the liquid deflection and the excitation amplitude are evaluated and the influence of varying conditions on the efficiency of the O-TLCD are discussed. Results demonstrate that the proposed O-TLCD can be well tuned to the structure and markedly control the peak and the RMS of responses of the structure. In the end, an experimental study on a prototype O-TLCD is performed using a shaking table, which verifies the proposed mathematical modeling approach.


Sign in / Sign up

Export Citation Format

Share Document