Photodynamic therapy and gaseous ozone versus conventional post space treatment methods on the push-out bond strength of fiber posts luting with different resin cements

2021 ◽  
pp. 102586
Author(s):  
Cihan KÜDEN ◽  
Seda Nur KARAKAŞ
Keyword(s):  
Photodynamic Therapy ◽  
Bond Strength ◽  
Resin Cements ◽  
Treatment Methods ◽  
Fiber Posts ◽  
Gaseous Ozone ◽  
Post Space ◽  
Push Out

scholarly journals Influence of the Resin Cement Thickness on the Push-Out Bond Strength of Glass Fiber Posts

2016 ◽  
Vol 27 (5) ◽  
pp. 592-598 ◽  
Author(s):  
Regina Maria Helen-Cot Marcos ◽  
◽  
Gustavo Ross Kinder ◽  
Edson Alfredo ◽  
Tarcisio Quaranta ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Composite ◽  
Resin Cement ◽  
Distilled Water ◽  
Cement Layer ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Post Space ◽  
Push Out

Abstract The objective of the present study was to evaluate the influence of resin cement thickness on the bond strength of prefabricated and customized glass fiber posts after storage in distilled water. Thirty human uniradicular roots were treated endodontically. The roots were divided into 3 groups: THIN (thin cement layer) - post space preparation with #0.5 drill and cementation of #0.5 post; THICK (thick cement layer) - post space preparation with #1 drill and cementation of #0.5 post; and CUSTOM (customized cement layer) - post space preparation with #1 drill and cementation of a customized post (#0.5 glass fiber posts customized with resin composite). All posts were luted with self-adhesive resin cement. The push-out test was carried out after storage for 24 h and 90 days in distilled water at 37 °C. The data were analyzed with three-way ANOVA and Tukey's test (a=0.05). Bond strengths were significantly higher for CUSTOM (9.37 MPa), than for THIN (7.85 MPa) and THICK (7.07 MPa), which were statistically similar. Considering the thirds, the bond strength varied in the sequence: apical (7.13 MPa) < middle (8.22 MPa) = coronal (8.94 MPa). Bond strength for 24 h storage was significantly higher (8.80 MPa) than for 90-day storage (7.40 MPa). It may be concluded that the thickness of resin cement influenced the bond strength of glass fiber posts. The customized posts presented higher bond strength. Storage in water for 90 days affected negatively the values of bond strength, especially for thick cement layers in the apical third.

Influence of curcumin photosensitizer in photodynamic therapy on the mechanical properties and push-out bond strength of glass-fiber posts to intraradicular dentin

2019 ◽  
Vol 25 ◽  
pp. 376-381 ◽  
Author(s):  
Henrico Badaoui Strazzi Sahyon ◽  
Paloma Pereira da Silva ◽  
Murilo Silva de Oliveira ◽  
Luciano Tavares Angelo Cintra ◽  
Eloi Dezan-Júnior ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Photodynamic Therapy ◽  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out

scholarly journals Effect of cement type and thickness on push-out bond strength of fiber posts

2018 ◽  
Vol 12 (4) ◽  
pp. 277-282
Author(s):  
Farzaneh Farid ◽  
Khadijeh Rostami ◽  
Sareh Habibzadeh ◽  
MohammadJavad Kharazifard
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Test Results ◽  
Resin Cements ◽  
Fiber Posts ◽  
Significant Difference ◽  
Root Dentin ◽  
Group 2 ◽  
Self Etch ◽  
Push Out

Background. This study investigated the effect of the thickness of two resin cements on push-out bond strength of fiber posts to root dentin. Methods. Sixty decoronated single-rooted teeth were endodontically treated. The specimens were then randomly allocated to two groups (n=30); group 1: drill size 90 w, matching the size of fiber posts used; group 2: drill size 110, larger than the posts. The specimens in each group were divided into 2 subgroups (n=15); subgroup SE, in which the posts were cemented with self-etch Panavia F2.0 and subgroup SA, in which self-adhesive Panavia cement was used. After 72 hours, 2 slices with 1 mm of thickness were prepared from the mid-root of each specimen. Push-out bond strength test was performed in a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed with two-way ANOVA and t-test. Results. The mean bond strengths of the posts cemented in matched-size spaces for SE and SA groups were 4.02±1.6 and 4.12±2.3 MPa, respectively. For posts cemented in oversized spaces, the values were 4.9±2.3 and 2.8±1.3 MPa, respectively. In matched-size spaces, there was no significant difference between the two groups. Conclusion. The results of this study suggested that increasing the cement thickness would reduce the bond strength of fiber posts to root dentin when self-adhesive cements are used; however, self-etch adhesives were not affected.

scholarly journals Adhesive Durability Inside the Root Canal Using Self-adhesive Resin Cements for Luting Fiber Posts

2017 ◽  
Vol 42 (6) ◽  
pp. E167-E176 ◽  
Author(s):  
K Bitter ◽  
A Maletic ◽  
K Neumann ◽  
L Breschi ◽  
G Sterzenbach ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Silver Deposits ◽  
Bond Strengths ◽  
One Year ◽  
Push Out

SUMMARY Objectives: The aim of the study was to investigate the effects of various self-adhesive resin cements on the push-out bond strengths and nanoleakage expression at the luting interfaces of fiber posts immediately and after one year of aging. Methods and Materials: One hundred forty-four extracted human anterior teeth were endodontically treated. After post space preparation, fiber posts were luted using five commercially available self-adhesive resin (SAR) cements and a core build-up material applied with a self-etch adhesive (BF: Bifix SE/Rebilda Post, VOCO; CSA: Clearfil SA Cement/Rely X Fiber Post, 3M ESPE; RX: RelyX Unicem 2/Rely X Fiber Post, 3M ESPE; SPC: Speed Cem/FRC Postec, Ivoclar Vivadent; SMC: Smart Cem/X Post, Dentsply; RB: Rebilda DC-Futurabond/Rebilda Post; n=22). For each group, half of the specimens were subjected to thermocycling (TC) (5°C-55°C, 10,000 cycles) and stored humid for one year at 37°C. Push-out bond strength data of six slices (thickness 1 mm) per root and nanoleakage expression of representative specimens were evaluated after 24 hours (baseline) and after TC and storage for one year (aging), respectively. Results: Bond strength differed significantly among resin cements (p&lt;0.0005) and the location inside the root canal (p&lt;0.0005), but not by aging (p=0.390; repeated-measures analysis of variance). SMC (14.6±5.8 MPa) and RX (14.1±6.8 MPa) revealed significantly higher bond strength compared to BF (10.6±5.4 MPa) and RB (10.0±4.6 MPa) but differed not significantly from SPC (12.8±4.8) MPa; CSA (6.1±4.6 MPa) revealed significantly lower bond strength compared to all other investigated materials (p&lt;0.05; Tukey Honestly Significantly Different). Qualitative nanoleakage analysis revealed more silver deposits at the interface in all groups after aging. For CSA, a large amount of silver deposits inside the cement was also observed at baseline and after aging. Conclusions: Fiber post luting using SAR cements demonstrated reliable bond strengths. Product-specific differences and initial degradation effects could be demonstrated.

scholarly journals Choice of Endodontic Fiber Posts and its Influence on Dental Malpractice: An in vitro Evaluation

2017 ◽  
Vol 18 (6) ◽  
pp. 452-457
Author(s):  
Houssam Jassar ◽  
Hassan El Husseini
Keyword(s):  
Bond Strength ◽  
Low Cost ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Fiber Posts ◽  
Significant Difference ◽  
Post Space ◽  
Adhesive Cement ◽  
Push Out

ABSTRACT Aims and objectives The fiber post type used in restoring endodontically treated teeth may affect the dental expert decision in the case of dental malpractice. The aim of this study was to evaluate the low-cost commercial fiber post in comparison with a higher cost or well-known documented fiber post system. Materials and methods A total of 20 premolars were selected for the study; following endodontic treatment, specimens were randomly divided into two groups of 10 specimens each according to the type of fiber post used: (1) Low-cost commercial fiber post (OYAPost, Taper Lucent, OYARICOM) and (2) higher cost well-known fiber post (Rely X Fiber post, 3M ESPE). Both fiber posts were cemented using self-adhesive cement (Rely X Unicem). Samples were subjected to push-out bond strength and to failure analysis. One-way analysis of variance was used (p < 0.005). Results There was no significant difference between the bond strength of the two tested groups (p > 0.05), while statistically significant difference (p < 0.05) was noted between the different post space regions (cervical, middle, and apical). Conclusion Based on the evidence from the study, it can be concluded that the type of fiber post should not affect the dental expert decision in the case of dental malpractice/lawsuit. Clinical significance All types of low-cost fiber posts may behave similarly to other higher cost or well-documented fiber posts. How to cite this article Ayoub F, Jassar H, El Husseini H, Salameh Z. Choice of Endodontic Fiber Posts and its Influence on Dental Malpractice: An in vitro Evaluation. J Contemp Dent Pract 2017;18(6):452-457.

scholarly journals Influence of Relining Post on the Bond Strength of Resin Cements

2015 ◽  
Vol 16 (7) ◽  
pp. 559-564 ◽  
Author(s):  
Matheus Coelho Bandéca ◽  
Adriano Augusto Melo de Mendonça ◽  
Etevaldo Matos Maia Filho ◽  
Fausto da Silva Bramante ◽  
Darlon Martins Lima ◽  
...  
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
The Self ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Significant Difference ◽  
Adhesive Cement ◽  
Push Out

ABSTRACT This study evaluated the influence of relining fiber posts on the bond strength (BS) of resin cements in the root canal. Forty bovine teeth were divided in four groups (n = 10)G1 (ARC)—fiber post cemented with resin cement RelyX ARC; G2 (ARC+Z350)—relined fiber post cemented with RelyX ARC; G3 (U200)—fiber post cemented with self-adhesive cement RelyX U200; G4 (U200+Z350)—relined fiber post cemented with RelyX U200. The roots were sectioned in six 1.2-mm slices and the push-out test was performed. Data were analyzed by three-way analysis of variance (ANOVA), and Tukey's test (α = 0.05). For the conventional resin cement, there was no significant difference between groups G1-ARC (15.5 ± 3.8) and G2-ARC+Z350 (16.1 ± 4.5). For the self-adhesive cement, the results revealed higher BS values for relined posts G4-U200 + Z350 (19.9 ± 7.9) as compared to non-relined posts G3-U200 (14.4 ± 4.5). For both cements, in groups of relined posts, the apical and the cervical thirds presented similar BS. Relining enhances the performance of the self-adhesive resin cement, and the interaction between relining and root third influences the BS to the conventional resin cement. How to cite this article Conde DM, Rodrigues VP, de Fátima Carvalho Souza S, Bauer JRO, da Silva Bramante F, Lima SNL, Filho EMM, Bandeca MC, de Mendonça AAM, Lima DM. Influence of Relining Post on the Bond Strength of Resin Cements. J Contemp Dent Pract 2015;16(7):559-564.

scholarly journals Push-out bond strength of glass fiber posts luted with two resin cements

2017 ◽  
Vol 20 (4) ◽  
pp. 78
Author(s):  
Blanca Liliana Torres Léon ◽  
Vitor Lopes Franco ◽  
Emily Vivianne Freitas Silva ◽  
Leonardo Muniz ◽  
Fernando Carneiro Ribeiro
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Resin Cements ◽  
Anterior Teeth ◽  
Fiber Posts ◽  
Post And Core Technique ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Push Out

<p class="CorpoA"><strong>Objective.</strong> To evaluate the bond strength of a prefabricated glass fiber post to the root dentin with two resin cements using the push-out test. <strong>Material and Methods.</strong> Thirty fiber posts (White Post ECD) were cemented in human endodontically treated anterior teeth with two resin cements (n=15): Relyx<sup>TM </sup>ARC and AllCem. The roots were transversely sectioned and divided in cervical, middle and apical thirds after 48 h of cementation. The specimens' retention was tested by push-out method. The results were analyzed by 2-way ANOVA and Tukey’s test (<em>p</em>&lt;0.05). <strong>Results.</strong> There were no significant differences in the bond strength between the resin cements. The bond strength was higher in cervical third than in middle and apical thirds for both resin cements. It was observed higher percentages of adhesive failures followed by mixed. <strong>Conclusions.</strong> Both resin cements are indicated in the cementation of glass fiber post.</p><p class="CorpoA"><strong>Keywords</strong></p><p class="CorpoA">Dental prosthesis; Post and core technique; Biomechanical phenomena.</p>

Sign in / Sign up

Export Citation Format

Share Document