Addendum to: Mathematical model of dissolution of particles of NaCl in well drilling: Determination of mass transfer convective coefficient

2019 ◽  
Vol 180 ◽  
pp. 1124-1126
Author(s):  
Wanderson Lambert
Keyword(s):  
Mathematical Model ◽  
Mass Transfer ◽  
Well Drilling ◽  
Convective Coefficient

DETERMINATION OF PERFORMANCE INDICATORS OF THE TRUCK KrAZ-6510TE

2020 ◽  
pp. 19-26
Author(s):  
Olexandr Pavlenko ◽  
Serhii Dun ◽  
Maksym Skliar
Keyword(s):  
Mathematical Model ◽  
Surface Friction ◽  
Building Structures ◽  
Maximum Torque ◽  
Military Equipment ◽  
Military Vehicles ◽  
Force Magnitude ◽  
Vehicle Mobility ◽  
The Mathematical Model

In any economy there is a need for the bulky goods transportation which cannot be divided into smaller parts. Such cargoes include building structures, elements of industrial equipment, tracked or wheeled construction and agricultural machinery, heavy armored military vehicles. In any case, tractor-semitrailer should provide fast delivery of goods with minimal fuel consumption. In order to guarantee the goods delivery, tractor-semitrailers must be able to overcome the existing roads broken grade and be capable to tow a semi-trailer in off-road conditions. These properties are especially important for military equipment transportation. The important factor that determines a tractor-semitrailer mobility is its gradeability. The purpose of this work is to improve a tractor-semitrailer mobility with tractor units manufactured at PJSC “AutoKrAZ” by increasing the tractor-semitrailer gradeability. The customer requirements for a new tractor are determined by the maximizing the grade to 18°. The analysis of the characteristics of modern tractor-semitrailers for heavy haulage has shown that the highest rate of this grade is 16.7°. The factors determining the limiting gradeability value were analyzed, based on the tractor-semitrailer with a KrAZ-6510TE tractor and a semi-trailer with a full weight of 80 t. It has been developed a mathematical model to investigate the tractor and semi-trailer axles vertical reactions distribution on the tractor-semitrailer friction performances. The mathematical model has allowed to calculate the gradeability value that the tractor-semitrailer can overcome in case of wheels and road surface friction value and the tractive force magnitude from the engine. The mathematical model adequacy was confirmed by comparing the calculations results with the data of factory tests. The analysis showed that on a dry road the KrAZ-6510TE tractor with a 80 t gross weight semitrailer is capable to climb a gradient of 14,35 ° with its coupling mass full use condition. The engine's maximum torque allows the tractor-semitrailer to overcome a gradient of 10.45° It has been determined the ways to improve the design of the KrAZ-6510TE tractor to increase its gradeability. Keywords: tractor, tractor-semitrailer vehicle mobility, tractor-semitrailer vehicle gradeability.

Modeling of aerated upflow fixed bed reactors for nitrification

1999 ◽  
Vol 39 (4) ◽  
pp. 85-92 ◽  
Author(s):  
J. Behrendt
Keyword(s):  
Mathematical Model ◽  
Mass Transfer ◽  
Liquid Phase ◽  
Gas Phase ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Bulk Liquid ◽  
Initial Value ◽  
Fixed Bed Reactors ◽  
Number Of Cells

A mathematical model for nitrification in an aerated fixed bed reactor has been developed. This model is based on material balances in the bulk liquid, gas phase and in the biofilm area. The fixed bed is divided into a number of cells according to the reduced remixing behaviour. A fixed bed cell consists of 4 compartments: the support, the gas phase, the bulk liquid phase and the stagnant volume containing the biofilm. In the stagnant volume the biological transmutation of the ammonia is located. The transport phenomena are modelled with mass transfer formulations so that the balances could be formulated as an initial value problem. The results of the simulation and experiments are compared.

Research on a Generating Method of Spiral Flutes of Hourglass Worm Gear Hob

2017 ◽  
Author(s):  
Yang Jie ◽  
Li Haitao ◽  
Rui Chengjie ◽  
Wei Wenjun ◽  
Dong Xuezhu
Keyword(s):  
Mathematical Model ◽  
Manufacturing System ◽  
Worm Gear ◽  
Virtual Manufacturing ◽  
Transmission Ratio ◽  
Method Of Determination ◽  
Generating Method ◽  
Multiple Threads ◽  
Different Shapes

All of the cutting edges on an hourglass worm gear hob have different shapes and spiral angles. If the spiral angles are small, straight flutes are usually adopted. But for the hob with multiple threads, the absolute values of the negative rake angles at one side of the cutting teeth will greatly affect the cutting performance of the hob if straight flutes are still used. Therefore, spiral flutes are usually adopted to solve the problem. However, no method of determination of the spiral flute of the hourglass worm gear hob has been put forward till now. Based on the curved surface generating theory and the hourglass worm forming principle, a generating method for the spiral flute of the planar double enveloping worm gear hob is put forward in this paper. A mathematical model is built to generate the spiral flute. The rake angles of all cutting teeth of the hob are calculated. The laws of the rake angles of the cutting teeth of four hobs with different threads from one to four threads are analyzed when straight flutes and spiral flutes are adopted respectively. The laws between the value of the negative rake angles of the hob with four threads and the milling transmission ratio are studied. The most appropriate milling transmission ratio for generating the spiral flute is obtained. The machining of the spiral flutes is simulated by a virtual manufacturing system and the results verify the correctness of the method.

Methodology of Estimation of Fire Separation Distances between Construction Facilities by Calculation

2020 ◽  
Vol 1006 ◽  
pp. 93-100
Author(s):  
Vadym Nizhnyk ◽  
Yurii Feshchuk ◽  
Volodymyr Borovykov
Keyword(s):  
Mathematical Model ◽  
Heat Flux ◽  
Linear Regression ◽  
Ignition Temperature ◽  
Oil Products ◽  
Regression Equations ◽  
Fire Load ◽  
Literary Sources ◽  
Tabular Method

Based on analysis of appropriate literary sources we established that estimation of fire separation distances was based of two criteria: heat flux and temperature. We proposed to use “ignition temperature of materials” as principal criterion when determining fire separation distances between adjacent construction facilities. Based on the results derived while performing complete factorial we created mathematical model to describe trend of changing fire separation distances depending on caloric power of fire load (Q), openings factor of the external enclosing structures (k) and duration of irradiation (t); moreover, its adequacy was confirmed. Based on linear regression equations we substantiated calculation and tabular method for the determination of fire separation distances for a facility being irradiated which contains combustible or otherwise non-combustible façade and a facility where liquid oil products turn. We developed and proposed general methodology for estimation of fire separation distances between construction facilities by calculation.

Determination of Quantitative Sodium Mass Transfer Coefficient During Osmotic Processing of Potatoes

2015 ◽  
Vol 40 (5) ◽  
pp. 963-968 ◽  
Author(s):  
Troy Hinkley ◽  
Janam Pandya ◽  
Amanda J. Kinchla ◽  
Eric A. Decker
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient

scholarly journals Study on Optimal Placement and Reasonable Number of Viscoelastic Dampers by Improved Weight Coefficient Method

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Ji-ting Qu ◽  
Hong-nan Li
Keyword(s):  
Mathematical Model ◽  
Weight Coefficient ◽  
Optimal Placement ◽  
Optimal Method ◽  
Analogy Method ◽  
Numerical Examples ◽  
Viscoelastic Dampers ◽  
Reasonable Number ◽  
Coefficient Method

A new optimal method is presented by combining the weight coefficient with the theory of force analogy method. Firstly, a new mathematical model of location index is proposed, which deals with the determination of a reasonable number of dampers according to values of the location index. Secondly, the optimal locations of dampers are given. It can be specific from stories to spans. Numerical examples are illustrated to verify the effectiveness and feasibility of the proposed mathematical model and optimal method. At last, several significant conclusions are given based on numerical results.

Sign in / Sign up

Export Citation Format

Share Document