Superior corrosion resistance of mild steel coated with graphene oxide modified silane coating in chlorinated simulated concrete solution

2022 ◽  
Vol 164 ◽  
pp. 106716
Author(s):  
Yongjuan Geng ◽  
Peijian Zhou ◽  
Shaochun Li ◽  
Jian Cao ◽  
Zihan Zhou ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Graphene Oxide ◽  
Mild Steel ◽  
Silane Coating ◽  
Superior Corrosion Resistance ◽  
Concrete Solution

scholarly journals Improving the corrosion resistance of mild steel by zinc-graphene oxide coatings

2020 ◽  
Vol 65 (3) ◽  
pp. 23-32
Author(s):  
Nicoleta Cotolan ◽  
◽  
Graziella Liana Turdean ◽  
Julieta Daniela Chelaru ◽  
◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Graphene Oxide ◽  
Mild Steel ◽  
Oxide Coatings

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

DMV 25.7 N

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Pressures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Superior Corrosion Resistance

Abstract DMV 25.7 N is a superferritic-austenitic grade with high mechanical properties and superior corrosion resistance to chlorides, freshwater, and high pressures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-785. Producer or source: DMV Stainless USA Inc.

AW-TEN

Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Service Life ◽  
Yield Strength ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Superior Corrosion Resistance ◽  
Minimum Yield

Abstract AW-TEN is a high-strength structural steel offering 50,000 psi minimum yield strength, good formability and weldability, and superior corrosion resistance. It is intended primarily for weight reduction and longer service life. It is recommended for automobile and truck bodies, buildings, bridges, railway cars, booms, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-199. Producer or source: Alan Wood Steel Company.

CRUCIBLE CPM 10V, CPM 9V, MPL-1, CPM 440 V, CPM REX M4

Alloy Digest ◽  
1993 ◽  
Vol 42 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Corrosion And Wear ◽  
Tool Steels ◽  
Superior Corrosion Resistance

Abstract For demanding applications in industry, alloys have been custom crafted by powder metallurgy as systems for wear or wear/corrosion resistance. CPM 10V and 9V tool steels provide excellent wear resistance, and CPM 440 V, MPL-1, and CPM-M4 are used when superior corrosion resistance and excellent wear resistance are required This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance. Filing Code: TS-517. Producer or source: Crucible Materials Corporation.

scholarly journals Hydrophobic Modification of Graphene Oxide and Its Effect on the Corrosion Resistance of Silicone-Modified Epoxy Resin

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 89
Author(s):  
Wei Yuan ◽  
Qian Hu ◽  
Jiao Zhang ◽  
Feng Huang ◽  
Jing Liu
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Graphene Oxide ◽  
Physical Properties ◽  
Epoxy Resin ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Modified Epoxy

This study modified graphene oxide (GO) with hydrophilic octadecylamine (ODA) via covalent bonding to improve its dispersion in silicone-modified epoxy resin (SMER) coatings. The structural and physical properties of ODA-GO were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle tests. The ODA-GO composite materials were added to SMER coatings by physical mixing. FE-SEM, water absorption, and contact angle tests were used to evaluate the physical properties of the ODA-GO/SMER coatings, while salt spray, electrochemical impedance spectroscopy (EIS), and scanning Kelvin probe (SKP) methods were used to test the anticorrosive performance of ODA-GO/SMER composite coatings on Q235 steel substrates. It was found that ODA was successfully grafted onto the surfaces of GO. The resulting ODA-GO material exhibited good hydrophobicity and dispersion in SMER coatings. The anticorrosive properties of the ODA-GO/SMER coatings were significantly improved due to the increased interfacial adhesion between the nanosheets and SMER, lengthening of the corrosive solution diffusion path, and increased cathodic peeling resistance. The 1 wt.% ODA-GO/SMER coating provided the best corrosion resistance than SMER coatings with other amounts of ODA-GO (including no addition). After immersion in 3.5 wt.% NaCl solution for 28 days, the low-frequency end impedance value of the 1 wt.% ODA-GO/SMER coating remained high, at 6.2 × 108 Ω·cm2.

scholarly journals Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 704
Author(s):  
Marija Riđošić ◽  
Nebojša D. Nikolić ◽  
Asier Salicio-Paz ◽  
Eva García-Lecina ◽  
Ljiljana S. Živković ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Healing Rate ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Self Healing ◽  
Kelvin Probe ◽  
Artificial Defect ◽  
Volta Potential ◽  
Superior Corrosion Resistance ◽  
The Stability

Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same conditions. The effect of two ceria sources, powder and home-made sol, on the morphology and corrosion resistance of the composite coatings was determined. During the electrodeposition process the plating solution was successfully agitated in an ultrasound bath. The source of the particles was found to influence the stability and dispersity of plating solutions. The application of ceria sol resulted in an increase of the ceria content in the resulting coating and favored the refinement from cauliflower-like morphology (Zn-Co) to uniform and compact coral-like structure (Zn-Co-CeO2 sol). The corrosion resistance of the composite coatings was enhanced compared to bare Zn-Co as evidenced by electrochemical impedance spectroscopy and scanning Kelvin probe results. Zn-Co doped with ceria particles originating from ceria sol exhibited superior corrosion resistance compared to Zn-Co-CeO2 (powder) coatings. The self-healing rate of artificial defect was calculated based on measured Volta potential difference for which Zn-Co-CeO2 (sol) coatings exhibited a self-healing rate of 73.28% in a chloride-rich environment.

scholarly journals Uncovering the superior corrosion resistance of iron made via ancient Indian iron-making practice

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Deepak Dwivedi ◽  
Jitendra P. Mata ◽  
Filomena Salvemini ◽  
Matthew R. Rowles ◽  
Thomas Becker ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Materials Science ◽  
Scientific Explanation ◽  
Central India ◽  
Protective Mechanisms ◽  
Excellent Corrosion Resistance ◽  
Metal Treatment ◽  
Indian Tribes ◽  
Superior Corrosion Resistance ◽  
Metallurgical Processes

AbstractAncient Indian iron artefacts have always fascinated researchers due to their excellent corrosion resistance, but the scientific explanation of this feature remains to be elucidated. We have investigated corrosion resistance of iron manufactured according to traditional metallurgical processes by the Indian tribes called ‘Agaria’. Iron samples were recovered from central India (Aamadandh, Korba district, Chhattisgarh). Iron artefacts are investigated using a range of correlative microscopic, spectroscopic, diffraction and tomographic techniques to postulate the hidden mechanisms of superlative corrosion resistance. The importance of manufacturing steps, ingredients involved in Agaria’s iron making process, and post-metal treatment using metal-working operation called hot hammering (forging) is highlighted. This study also hypothesizes the probable protective mechanisms of corrosion resistance of iron. Findings are expected to have a broad impact across multiple disciplines such as archaeology, metallurgy and materials science.

Sign in / Sign up

Export Citation Format

Share Document