Solid-phase crystallization of high-quality Si films on SiO2 by local Ge-insertion

2004 ◽  
Vol 451-452 ◽  
pp. 489-492 ◽  
Author(s):  
I. Tsunoda ◽  
K. Nagatomo ◽  
A. Kenjo ◽  
T. Sadoh ◽  
M. Miyao
Keyword(s):  
Solid Phase ◽  
Solid Phase Crystallization ◽  
High Quality ◽  
Si Films

High-Quality p-Type µc-Si Films Prepared by the Solid Phase Crystallization Method

1990 ◽  
Vol 29 (Part 1, No. 12) ◽  
pp. 2690-2693 ◽  
Author(s):  
Takao Matsuyama ◽  
Mikio Taguchi ◽  
Makoto Tanaka ◽  
Tsugufumi Matsuoka ◽  
Shinya Tsuda ◽  
...  
Keyword(s):  
Solid Phase ◽  
Solid Phase Crystallization ◽  
High Quality ◽  
Crystallization Method ◽  
Si Films ◽  
P Type

Preparation of High-Quality n-Type Poly-Si Films by the Solid Phase Crystallization (SPC) Method

1990 ◽  
Vol 29 (Part 1, No. 11) ◽  
pp. 2327-2331 ◽  
Author(s):  
Takao Matsuyama ◽  
Kenichiro Wakisaka ◽  
Masaaki Kameda ◽  
Makoto Tanaka ◽  
Tsugufumi Matsuoka ◽  
...  
Keyword(s):  
Solid Phase ◽  
Solid Phase Crystallization ◽  
High Quality ◽  
Si Films

Polycrystalline Silicon Films Formed by Solid-Phase Crystallization of Amorphous Silicon: the Substrate Effects on Crystallization Kinetics and Mechanism

1996 ◽  
Vol 424 ◽  
Author(s):  
Y.-H. Song ◽  
S.-Y. Kang ◽  
K. I. Cho ◽  
H. J. Yoo ◽  
J. H. Kim ◽  
...  
Keyword(s):  
Amorphous Silicon ◽  
Solid Phase ◽  
Chemical Vapor ◽  
Solid Phase Crystallization ◽  
Substrate Effects ◽  
Random Nucleation ◽  
Pressure Chemical ◽  
Si Films ◽  
Polycrystalline Silicon Films ◽  
Induced Crystallization

AbstractThe substrate effects on the solid-phase crystallization of amorphous silicon (a-Si) have been extensively investigated. The a-Si films were prepared on two kinds of substrates, a thermally oxidized Si wafer (SiO2/Si) and a quartz, by low-pressure chemical vapor deposition (LPCVD) using Si2H6 gas at 470 °C and annealed at 600 °C in an N2 ambient for crystallization. The analysis using XRD and Raman scattering shows that crystalline nuclei are faster formed on the SiO2/Si than on the quartz, and the time needed for the complete crystallization of a-Si films on the SiO2/Si is greatly reduced to 8 h from ˜15 h on the quartz. In this study, it was first observed that crystallization in the a-Si deposited on the SiO2/Si starts from the interface between the a-Si film and the thermal oxide of the substrate, called interface-induced crystallization, while random nucleation process dominates on the quartz. The very smooth surface of the SiO2/Si substrate is responsible for the observed interface-induced crystallization of a-Si films.

Stress and Dopant Activation in Solid Phase Crystalized Si Films

1999 ◽  
Vol 558 ◽  
Author(s):  
A. Kaan Kalkan ◽  
Stephen J. Fonash
Keyword(s):  
Tensile Stress ◽  
Defect Density ◽  
Solid Phase ◽  
Structural Defects ◽  
Raman Shift ◽  
Solid Phase Crystallization ◽  
Dopant Activation ◽  
Defect Creation ◽  
Si Films ◽  
High Level

ABSTRACTDefect creation mechanisms during solid phase crystallization (SPC) of Si thin films were investigated with PECVD amorphous precursor samples produced with various deposition temperatures and thicknesses. These precursor films were implanted with dopant and then crystallized to obtain both SPC and dopant activation. The doping efficiency was found to decrease with the tensile stress level as measured by Raman shift. The stress shows a decrease as the precursor deposition temperature and thickness are lowered. Furthermore, a lower level of stress is induced by rapid thermal annealing when the annealing temperature is high enough to soften the glass substrate on which the films were deposited. We show that by control of stress during the SPC step, intragrain defect density can be lowered and electronic quality of the resulting polycrystalline Si films can be improved. Based on these observations, we propose the following tentative model to explain the defect creation: during SPC, tensile stress evolution is considered to result from the volumetric contraction of Si film when it transforms from the amorphous to crystalline phase. This contraction is retarded by the substrate, which imposes a tensile stress on the film. A high level of stress leads to formation of structural defects inside the grains of the resulting polycrystalline material. These defects trap carriers or complex with the dopant reducing doping efficiency.

Grain size, Grain Uniformity, and (111) Texture Enhancement by Solid-phase Crystallization of F- and C-implanted SiGe Films

2000 ◽  
Vol 15 (7) ◽  
pp. 1630-1634 ◽  
Author(s):  
A. Rodríguez ◽  
J. Olivares ◽  
C. González ◽  
J. Sangrador ◽  
T. Rodríguez ◽  
...  
Keyword(s):  
Grain Size ◽  
Vapor Deposition ◽  
Solid Phase ◽  
Chemical Vapor ◽  
Solid Phase Crystallization ◽  
Grain Sizes ◽  
Pressure Chemical ◽  
Film Microstructure ◽  
Si Films ◽  
Size Dispersion

The crystallization kinetics and film microstructure of poly-SiGe layers obtained by solid-phase crystallization of unimplanted and C- and F-implanted 100-nm-thick amorphous SiGe films deposited by low-pressure chemical vapor deposition on thermally oxidized Si wafers were studied. After crystallization, the F- and C-implanted SiGe films showed larger grain sizes, both in-plane and perpendicular to the surface of the sample, than the unimplanted SiGe films. Also, the (111) texture was strongly enhanced when compared to the unimplanted SiGe or Si films. The crystallized F-implanted SiGe samples showed the dendrite-shaped grains characteristic of solid-phase crystallized pure Si. The structure of the unimplanted SiGe and C-implanted SiGe samples consisted of a mixture of grains with well-defined contour and a small number of quasi-dendritic grains. These samples also showed a very low grain-size dispersion.

High-quality polycrystalline silicon thin film prepared by a solid phase crystallization method

1996 ◽  
Vol 198-200 ◽  
pp. 940-944 ◽  
Author(s):  
T. Matsuyama ◽  
N. Terada ◽  
T. Baba ◽  
T. Sawada ◽  
S. Tsuge ◽  
...  
Keyword(s):  
Thin Film ◽  
Polycrystalline Silicon ◽  
Solid Phase ◽  
Silicon Thin Film ◽  
Solid Phase Crystallization ◽  
High Quality ◽  
Crystallization Method

Device Characteristics of a Poly-Silicon Thin Film Transistor Fabricated by Milc at Low Temperature

1996 ◽  
Vol 424 ◽  
Author(s):  
Seok-Woon Lee ◽  
Byung-IL Lee ◽  
Tae-Hyung Ihn ◽  
Tae-Kyung Kim ◽  
Young-Tae Kang ◽  
...  
Keyword(s):  
Thin Film ◽  
High Performance ◽  
Solid Phase ◽  
Thin Film Transistor ◽  
Silicon Thin Film ◽  
Solid Phase Crystallization ◽  
Thin Nickel ◽  
One Step ◽  
Lateral Crystallization ◽  
Si Films

AbstractHigh performance poly-Si thin film transistors were fabricated by using a new crystallization method, Metal-Induced Lateral Crystallization (MILC). The process temperature was kept below 500°C throughout the fabrication. After the gate definition, thin nickel films were deposited on top of the TFT's without an additional mask, and with a one-step annealing at 500°C, the activation of the dopants in source/drain/gate a-Si films was achieved simultaneously with the crystallization of the a-Si films in the channel area. Even without a post-hydrogenation passivation, mobilities of the MILC TFT's were measured to be as high as 120cm2/Vs and 90cm2/Vs for n-channel and p-channel, respectively. These values are much higher than those of the poly-Si TFT's fabricated by conventional solid-phase crystallization at around 6001C.

Copper-Enhanced Solid Phase Crystallization of Amorphous Silicon Films

1996 ◽  
Vol 424 ◽  
Author(s):  
Dong Kyun Sohn ◽  
Dae Gyu Moon ◽  
Byung Tae Ahn
Keyword(s):  
Solid Phase ◽  
Copper Ions ◽  
Crystallization Time ◽  
Solid Phase Crystallization ◽  
New Process ◽  
Low Temperature Crystallization ◽  
Amorphous Si ◽  
Si Films ◽  
Fractal Size ◽  
Temperature Crystallization

AbstractLow-temperature crystallization of amorphous Si (a-Si) films was investigated by adsorbing copper ions on the surface of the films. The copper ions were adsorbed by spincoating of Cu solution. This new process lowered the crystallization temperature and reduced crystallization time of a-Si films. For 1000 ppm solution, the a-Si film was partly crystallized down to 500°C in 20 h and almost completely crystallized at 530°C in 20 h. The adsorbed Cu on the surface acted as a seed of crystalline and caused fractal growth. The fractal size was varied from 10 to 200 prm, depending on the Cu concentration in solution. But the grain size of the films was about 400 nm, which was similar to that of intrinsic films crystallized at 600°C.

Preparation of High-Quality poly-Si and μc-Si Films by the SPC Method

1989 ◽  
Vol 164 ◽  
Author(s):  
T. Matsuyama ◽  
M. Nishikuni ◽  
M. Kameda ◽  
S. Okamoto ◽  
M. Tanaka ◽  
...  
Keyword(s):  
Solar Cell ◽  
Conversion Efficiency ◽  
Solid Phase ◽  
Wavelength Region ◽  
Optical Transmittance ◽  
High Quality ◽  
Long Wavelength ◽  
Si Solar Cell ◽  
Si Films ◽  
P Type

AbstractWe have achieved the highest total area conversion efficiency for an integrated type 10cm × 10cm a-Si solar cell at 10.2%. This value is the world record for a 10cm × 10cm a-Si solar cell. For further improvement of conversion efficiency in a-Si solar cells, it is necessary to develop materials with high-photosensitivity in the long wavelength region and materials with high conductivity. We have developed a Solid Phase Crystallization (SPC) method of growing a Si crystal at temperatures as low as 600°C. Using this method, thin-film polycrystalline silicon (poly-Si) with higP-photosensitivity in the long wavelength region and Hall mobility of 70cm2/V sec was obtained and quantum efficiency in the range of 800,∼ lO00nm was achieved up to 80% in the n-type poly-Si with grain size of about 2μm. We also succeeded in preparing a device-quality p-type microcrystalline silicon (μc-Si) using the SPC method at 620°C for 3 hours from the conventional plasma-CVD p-type amorphous silicon (a-5i) withoul using any post-doping process. Obtained properties of μd=2 × 103 (.cm) and a high optical transmittance in the 2.0 ∼ 3.0 eV range are better as a window material than the conventional p-type μc-Si:H. Therefore, it was concluded that the SPC method is better as a new technique to prepare high-quality solar cell materials.

Sign in / Sign up

Export Citation Format

Share Document