Mitigating Electrode Fouling in Electrocoagulation by Means of Polarity Reversal: The Effects of Electrode Type, Current Density, and Polarity Reversal Frequency

A possible relationship between the hot prominence transition sheath, increased internal turbulent and/or helical motion prior to prominence eruption and the prominence eruption (“disparition brusque”) is discussed. The associated darkening of the filament or brightening of the prominence is interpreted as a change in the prominence’s internal pressure gradient which, if of the correct sign, can lead to short wavelength turbulent convection within the prominence. Associated with such a pressure gradient change may be the alteration of the current density gradient within the prominence. Such a change in the current density gradient may also be due to the relative motion of the neighbouring plages thereby increasing the magnetic shear within the prominence, i.e., steepening the current density gradient. Depending on the magnitude of the current density gradient, i.e., magnetic shear, disruption of the prominence can occur by either a long wavelength ideal MHD helical (“kink”) convective instability and/or a long wavelength resistive helical (“kink”) convective instability (tearing mode). The long wavelength ideal MHD helical instability will lead to helical rotation and thus unwinding due to diamagnetic effects and plasma ejections due to convection. The long wavelength resistive helical instability will lead to both unwinding and plasma ejections, but also to accelerated plasma flow, long wavelength magnetic field filamentation, accelerated particles and long wavelength heating internal to the prominence.

Download Full-text

Microstructural characterization of YBa2Cu3O7-x thin films formed by metalorganic CVD

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089718 ◽

1991 ◽

Vol 49 ◽

pp. 1080-1081

Author(s):

P. Lu ◽

W. Huang ◽

C.S. Chern ◽

Y.Q. Li ◽

J. Zhao ◽

...

Keyword(s):

Thin Film ◽

Thin Films ◽

Critical Current Density ◽

Critical Current ◽

Current Density ◽

Film Growth ◽

Chemical Vapor ◽

Microstructural Characterization ◽

Ion Milling ◽

Conventional Grinding

The YBa2Cu3O7-x thin films formed by metalorganic chemical vapor deposition(MOCVD) have been reported to have excellent superconducting properties including a sharp zero resistance transition temperature (Tc) of 89 K and a high critical current density of 2.3x106 A/cm2 or higher. The origin of the high critical current in the thin film compared to bulk materials is attributed to its structural properties such as orientation, grain boundaries and defects on the scale of the coherent length. In this report, we present microstructural aspects of the thin films deposited on the (100) LaAlO3 substrate, which process the highest critical current density.Details of the thin film growth process have been reported elsewhere. The thin films were examined in both planar and cross-section view by electron microscopy. TEM sample preparation was carried out using conventional grinding, dimpling and ion milling techniques. Special care was taken to avoid exposure of the thin films to water during the preparation processes.

Download Full-text

Analytical electron microscopy of grain boundaries in Al-Cu metallizations

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100133059 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1684-1685

Author(s):

J. R. Michael ◽

A. D. Romig ◽

D. R. Frear

Keyword(s):

Electron Microscopy ◽

Integrated Circuits ◽

Failure Mode ◽

Current Density ◽

Thermal History ◽

Analytical Electron Microscopy ◽

Cu Metallization ◽

Analytical Electron ◽

Interconnect Lines

Al with additions of Cu is commonly used as the conductor metallizations for integrated circuits, the Cu being added since it improves resistance to electromigration failure. As linewidths decrease to submicrometer dimensions, the current density carried by the interconnect increases dramatically and the probability of electromigration failure increases. To increase the robustness of the interconnect lines to this failure mode, an understanding of the mechanism by which Cu improves resistance to electromigration is needed. A number of theories have been proposed to account for role of Cu on electromigration behavior and many of the theories are dependent of the elemental Cu distribution in the interconnect line. However, there is an incomplete understanding of the distribution of Cu within the Al interconnect as a function of thermal history. In order to understand the role of Cu in reducing electromigration failures better, it is important to characterize the Cu distribution within the microstructure of the Al-Cu metallization.

Download Full-text

Microstructure Development in a High Current Density NbTi Superconducting Composite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010011790x ◽

1985 ◽

Vol 43 ◽

pp. 186-189

Author(s):

P. J. Lee ◽

D. C. Larbalestier

Keyword(s):

Current Density ◽

High Current Density ◽

Cold Drawing ◽

Heat Treatments ◽

Grain Structure ◽

Fine Grain ◽

Boundary Film ◽

Quantitative Basis ◽

Cold Worked ◽

Very High

Several features of the metallurgy of superconducting composites of Nb-Ti in a Cu matrix are of interest. The cold drawing strains are generally of order 8-10, producing a very fine grain structure of diameter 30-50 nm. Heat treatments of as little as 3 hours at 300 C (∼ 0.27 TM) produce a thin (1-3 nm) Ti-rich grain boundary film, the precipitate later growing out at triple points to 50-100 nm dia. Further plastic deformation of these larger a-Ti precipitates by strains of 3-4 produces an elongated ribbon morphology (of order 3 x 50 nm in transverse section) and it is the thickness and separation of these precipitates which are believed to control the superconducting properties. The present paper describes initial attempts to put our understanding of the metallurgy of these heavily cold-worked composites on a quantitative basis. The composite studied was fabricated in our own laboratory, using six intermediate heat treatments. This process enabled very high critical current density (Jc) values to be obtained. Samples were cut from the composite at many processing stages and a report of the structure of a number of these samples is made here.

Download Full-text

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100164155 ◽

1996 ◽

Vol 54 ◽

pp. 338-339

Author(s):

I-Fei Tsu ◽

D.L. Kaiser ◽

S.E. Babcock

Keyword(s):

Grain Boundary ◽

Critical Current Density ◽

Critical Current ◽

Current Density ◽

Electromagnetic Properties ◽

Length Scale ◽

Density Values ◽

Current Densities ◽

Applied Fields ◽

A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Download Full-text

Electron-beam damage of oxides at high current densities

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100155141 ◽

1989 ◽

Vol 47 ◽

pp. 634-635

Author(s):

M. R. McCartney ◽

J. K. Weiss ◽

David J. Smith

Keyword(s):

Electron Beam ◽

Electron Microscope ◽

Current Density ◽

Transition Metal Oxides ◽

Time Resolved ◽

Rapid Acquisition ◽

Resolution Electron ◽

Current Densities ◽

Electron Stimulated Desorption ◽

Channel Analyzer

It is well-known that electron-beam irradiation within the electron microscope can induce a variety of surface reactions. In the particular case of maximally-valent transition-metal oxides (TMO), which are susceptible to electron-stimulated desorption (ESD) of oxygen, it is apparent that the final reduced product depends, amongst other things, upon the ionicity of the original oxide, the energy and current density of the incident electrons, and the residual microscope vacuum. For example, when TMO are irradiated in a high-resolution electron microscope (HREM) at current densities of 5-50 A/cm2, epitaxial layers of the monoxide phase are found. In contrast, when these oxides are exposed to the extreme current density probe of an EM equipped with a field emission gun (FEG), the irradiated area has been reported to develop either holes or regions almost completely depleted of oxygen. ’ In this paper, we describe the responses of three TMO (WO3, V2O5 and TiO2) when irradiated by the focussed probe of a Philips 400ST FEG TEM, also equipped with a Gatan 666 Parallel Electron Energy Loss Spectrometer (P-EELS). The multi-channel analyzer of the spectrometer was modified to take advantage of the extremely rapid acquisition capabilities of the P-EELS to obtain time-resolved spectra of the oxides during the irradiation period. After irradiation, the specimens were immediately removed to a JEM-4000EX HREM for imaging of the damaged regions.

Download Full-text

Elemental mass loss in silicate minerals during x-ray analysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100177155 ◽

1990 ◽

Vol 48 (4) ◽

pp. 804-805

Author(s):

P.E. Champness ◽

R.W. Devenish

Keyword(s):

Mass Loss ◽

Current Density ◽

Damage Mechanism ◽

Beam Current ◽

Single Chain ◽

Plagioclase Feldspar ◽

X Ray ◽

Alkali Ions ◽

Structural Order ◽

Sheet Silicate

It has long been recognised that silicates can suffer extensive beam damage in electron-beam instruments. The predominant damage mechanism is radiolysis. For instance, damage in quartz, SiO2, results in loss of structural order without mass loss whereas feldspars (framework silicates containing Ca, Na, K) suffer loss of structural order with accompanying mass loss. In the latter case, the alkali ions, particularly Na, are found to migrate away from the area of the beam. The aim of the present study was to investigate the loss of various elements from the common silicate structures during electron irradiation at 100 kV over a range of current densities of 104 - 109 A m−2. (The current density is defined in terms of 50% of total current in the FWHM probe). The silicates so far ivestigated are:- olivine [(Mg, Fe)SiO4], a structure that has isolated Si-O tetrahedra, garnet [(Mg, Ca, Fe)3Al2Si3AO12 another silicate with isolated tetrahedra, pyroxene [-Ca(Mg, Fe)Si2O6 a single-chain silicate; mica [margarite, -Ca2Al4Si4Al4O2O(OH)4], a sheet silicate, and plagioclase feldspar [-NaCaAl3Si5O16]. Ion- thinned samples of each mineral were examined in a VG Microscopes UHV HB501 field- emission STEM. The beam current used was typically - 0.5 nA and the current density was varied by defocussing the electron probe. Energy-dispersive X-ray spectra were collected every 10 seconds for a total of 200 seconds using a Link Systems windowless detector. The thickness of the samples in the area of analysis was normally 50-150 nm.

Download Full-text

A highly stable CoMo2S4/Ni3S2 heterojunction electrocatalyst for efficient hydrogen evolution

Chemical Communications ◽

10.1039/d0cc06972h ◽

2021 ◽

Author(s):

Minmin Wang ◽

Mengke Zhang ◽

Wenwu Song ◽

Weiting Zhong ◽

Xunyue Wang ◽

...

Keyword(s):

Hydrogen Evolution ◽

Current Density ◽

A Current

A CoMo2S4/Ni3S2 heterojunction is prepared with an overpotential of only 51 mV to drive a current density of 10 mA cm−2 in 1 M KOH solution and ∼100% of the potential remains in the ∼50 h chronopotentiometric curve at 10 mA cm−2.

Download Full-text