Fabrication of titania-coated silica fibers and effect of substrate shape on coating growth rate

2003 ◽  
Vol 423 (2) ◽  
pp. 119-124 ◽  
Author(s):  
H Okudera ◽  
Y Yokogawa
2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Yong Zeng ◽  
Yakun Zhang ◽  
Junxue He ◽  
Hai Zhou ◽  
Chunwei Zhang ◽  
...  

In automatic spraying of spray painting robot, in order to solve the problems of coating growth rate modeling for varied dip-angle spraying technology, a prediction mode of coating growth rate using the Gaussian sum model is proposed. Based on the Gaussian sum model, a theoretical model for coating growth rate with varied dip-angle spraying is established by using the theory of differential geometry. The coating thickness of the sample points in the distribution range of the coating was obtained by making the experiment of varied dip-angle spraying. Based on the theoretical model, the nonlinear least square method is used to fit the coating thickness of the sample points and the parameter values of the theoretical model are calculated. By analyzing the variation law of the parameters with the spray dip-angle, the prediction model of coating growth rate for varied dip-angle spraying is established. Experiments have shown that the prediction model has good fitting precision; it can satisfy the real-time requirement with varied dip-angle spraying trajectory planning in the offline programming system.


2019 ◽  
Vol 970 ◽  
pp. 55-62
Author(s):  
Alexander A. Rogachev ◽  
Petr A. Luchnikov ◽  
Oleg A. Sarkisov ◽  
Alexander V. Rogachev ◽  
Inna Plotnikova

The kinetic and morphological peculiarities of polytetrafluoroethylene (PTFE) coating growth onset from the active gas phase on differently pretreated substrates are considered. The substrate surface energy was found to exert an effect on distribution of polymer micro-and nanoparticles both at the initial stage so during coating growth. The substrate surface activation was proved to result in the increasing growth rate and formation of a continuous coating with a thinner apparent thickness. The physicomathematical model of presented regularities was elaborated.


Author(s):  
V. M. Posuvailo ◽  
V. V. Vytvytskiy ◽  
M. M. Romaniv ◽  
T. O. Pryhorovska

There has been carried out an analysis of methods of oxide covering formation productivity increasing during plasma electrolytic oxidation of aluminum in electrolyte. There has been developed a technology of blank manufacturing and part strengthening by plasma electrolytic oxidation in the electrolyte, as well as the workbench has been modernized. There has been studied the process of oxidoceramic coating synthesis for the D16T aluminum deformed alloy of during plasma electrolytic oxidation in the electrolyte for different process parameters. It is established that the growth rate of oxidoceramic coating can be significantly increased by electrolyte component concentration involved in aluminum oxidation and rational choice of process electrical parameters. Hydrogen peroxide addition leads to obtained oxoceramic coating thickness increasing due to O, O2, OH, OH– concentration increasing in the electrolyte. It is established that the optimal concentration of H2O2 ranges from 5 g/l to 7 g/l.  A further increase of peroxide concentration leads to a decrease in peroxide effect on oxoceramic coating growth rate on the D16T aluminum deformed alloy due to pH changes of the electrolyte and the deterioration of the oxide coating.


Author(s):  
Wilfried Sigle ◽  
Matthias Hohenstein ◽  
Alfred Seeger

Prolonged electron irradiation of metals at elevated temperatures usually leads to the formation of large interstitial-type dislocation loops. The growth rate of the loops is proportional to the total cross-section for atom displacement,which is implicitly connected with the threshold energy for atom displacement, Ed . Thus, by measuring the growth rate as a function of the electron energy and the orientation of the specimen with respect to the electron beam, the anisotropy of Ed can be determined rather precisely. We have performed such experiments in situ in high-voltage electron microscopes on Ag and Au at 473K as a function of the orientation and on Au as a function of temperature at several fixed orientations.Whereas in Ag minima of Ed are found close to <100>,<110>, and <210> (13-18eV), (Fig.1) atom displacement in Au requires least energy along <100>(15-19eV) (Fig.2). Au is thus the first fcc metal in which the absolute minimum of the threshold energy has been established not to lie in or close to the <110> direction.


2020 ◽  
Vol 640 ◽  
pp. A53
Author(s):  
L. Löhnert ◽  
S. Krätschmer ◽  
A. G. Peeters

Here, we address the turbulent dynamics of the gravitational instability in accretion disks, retaining both radiative cooling and irradiation. Due to radiative cooling, the disk is unstable for all values of the Toomre parameter, and an accurate estimate of the maximum growth rate is derived analytically. A detailed study of the turbulent spectra shows a rapid decay with an azimuthal wave number stronger than ky−3, whereas the spectrum is more broad in the radial direction and shows a scaling in the range kx−3 to kx−2. The radial component of the radial velocity profile consists of a superposition of shocks of different heights, and is similar to that found in Burgers’ turbulence. Assuming saturation occurs through nonlinear wave steepening leading to shock formation, we developed a mixing-length model in which the typical length scale is related to the average radial distance between shocks. Furthermore, since the numerical simulations show that linear drive is necessary in order to sustain turbulence, we used the growth rate of the most unstable mode to estimate the typical timescale. The mixing-length model that was obtained agrees well with numerical simulations. The model gives an analytic expression for the turbulent viscosity as a function of the Toomre parameter and cooling time. It predicts that relevant values of α = 10−3 can be obtained in disks that have a Toomre parameter as high as Q ≈ 10.


Sign in / Sign up

Export Citation Format

Share Document