High temperature tribological behaviors of aluminum matrix composites reinforced with solid lubricant particles

2020 ◽  
Vol 30 (5) ◽  
pp. 1195-1210
Author(s):  
V.V. MONIKANDAN ◽  
P.K. RAJENDRAKUMAR ◽  
M.A. JOSEPH
Keyword(s):  
High Temperature ◽  
Solid Lubricant ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Tribological Behaviors

High-temperature mechanical behavior of Al-Cu matrix composites containing diboride particles

2014 ◽  
Vol 21 (1) ◽  
pp. 29-38
Author(s):  
Oscar Marcelo Suárez ◽  
Natalia Cortes-Urrego ◽  
Sujeily Soto-Medina ◽  
Deborah Marty-Flores
Keyword(s):  
High Temperature ◽  
Aluminum Matrix ◽  
Copper Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Compression Creep ◽  
The Matrix ◽  
Material Creep ◽  
Copper Matrix Composite ◽  
Composite Hardness

AbstractAn aluminum-copper matrix composite reinforced with aluminum diboride particles was studied at high temperature via thermomechanometry experiments. The matrix contained 2 wt% Cu, whereas the amount of boron forming AlB2 ranged from 0 to 4 wt%, i.e., 0 to 8.31 vol% of diboride particles. In the first segment of the research, we demonstrated that larger amounts of AlB2 particles raised the composite hardness even at 300°C. To assess the material creep behavior, another set of specimens were tested under 1 N compression at 400°C and 500°C for 12 h. Higher levels of AlB2 allowed the composites to withstand compression creep deformations at those temperatures. By using existing creep models developed for metal matrix composites we were able to determine that viscous slip deformation was the dominant deformation mechanism for the temperatures and stress levels used in our experiments. Additionally, the computed creep activation energy for these aluminum matrix composites were found comparable to the energies reported for other similar materials, for instance, Al/SiCp composites.

Synthesis of the in situ aluminum matrix composite through pyrolysis of high temperature vulcanization silicone

2017 ◽  
Vol 52 (1) ◽  
pp. 123-134 ◽  
Author(s):  
Mohammad Senemar ◽  
Behzad Niroumand ◽  
Ali Maleki ◽  
Pradeep K Rohatgi
Keyword(s):  
High Temperature ◽  
High Temperatures ◽  
Pure Aluminum ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composite ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Commercially Pure ◽  
The Matrix

In this study, in situ aluminum matrix composites were synthesized through pyrolysis of high temperature vulcanization silicone in commercially pure aluminum melt. For this purpose, 1 to 4 wt% of high temperature vulcanization silicone was added to a vortex of molten aluminum at 750℃ and the resulting slurries were cast in steel dies. Microstructure, hardness, and tensile properties of the as-cast samples were examined at ambient and high temperatures. The results revealed the in situ formation and distribution of reinforcement particles in the matrix. Energy-dispersive X-ray analysis indicated that the formed reinforcement particles consisted of O and Si elements. This confirms the in situ reinforcement formation by pyrolysis of high temperature vulcanization silicone in the melt. The size of the in situ formed particles was mostly in the range of 200–2000 nm. It was shown that the composites synthesized by the addition of 4 wt% high temperature vulcanization had the highest mechanical properties both at ambient and high temperatures. Room temperature hardness, tensile strength, and yield strength of this sample were increased by about 50%, 23%, and 19% compared to the monolithic sample, respectively.

Investigation of the high temperature dry sliding wear behavior of graphene nanoplatelets reinforced aluminum matrix composites

2020 ◽  
pp. 002199832097903
Author(s):  
Seçkin Martin ◽  
Sinan Kandemir ◽  
Maksim Antonov
Keyword(s):  
High Temperature ◽  
Tribological Properties ◽  
Solid Lubricant ◽  
Elevated Temperatures ◽  
Wear Behavior ◽  
Aluminum Matrix ◽  
Graphene Nanoplatelets ◽  
Aluminum Matrix Composites ◽  
Wear Performance ◽  
Ball On Disc

In this study, graphene nanoplatelets (GNPs) with a thickness of 50-100 nm have been utilized to improve the mechanical and tribological properties of A360 alloy due to their extraordinary mechanical properties and solid lubricant nature. For the investigation of tribological properties, ball-on disc tests were carried out at various temperatures including room temperature (RT), 150 °C, and 300 °C. According to the hardness and ball-on-disc test results, the nanocomposite samples reinforced with GNPs exhibited improved hardness and wear resistance. The improvement in the wear behavior of nanocomposites was referred to the temporarily formed solid lubricant film of harder GNPs during the wear, and hence coefficient of friction (COF) and volume loss were considerably reduced. Abrasive-adhesive, oxidative, and mild-to-severe were found to be main wear mechanisms at RT, 150 °C, and 300 °C, respectively. Overall, the results show that the nanocomposites fabricated by casting method combined with mechanical stirring and ultrasonication have promising wear performance, especially at elevated temperatures. This may suggest that these developed materials could be potential candidates to be used in the engineering applications requiring high temperature wear performance.

HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOR OF STIR-CAST Al–TiB2 METAL MATRIX COMPOSITES

2018 ◽  
Vol 25 (08) ◽  
pp. 1850122 ◽  
Author(s):  
SUSWAGATA PORIA ◽  
GOUTAM SUTRADHAR ◽  
PRASANTA SAHOO
Keyword(s):  
High Temperature ◽  
Tribological Behavior ◽  
Operating Temperature ◽  
Normal Load ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Friction Behavior ◽  
Sem Images ◽  
X Ray

This study considers high temperature tribological behavior of Al-TiB2 aluminum matrix composites (AMCs) fabricated through stir cast method. Effect of operating temperature on wear and friction behavior is studied for four different weight percentages of reinforcements using a high-temperature tribo-tester over a temperature range of 50[Formula: see text]C–250[Formula: see text]C under normal load in the range of 25–75[Formula: see text]N. Surface morphology and wear debris are studied through scanning electron microscopy (SEM) images. Energy dispersive X-ray (EDAX) and X-ray diffraction (XRD) studies are performed to observe the wear mechanism at high temperature. Increase in the amount of reinforcement improves wear resistance of composites at all temperatures. Friction and rate of wear are found to increase with operating temperature. Formation of oxide layers and softening of the surface are found to play crucial role in controlling the tribological behavior of stir cast Al–TiB2 composites at high operating temperatures.

Sign in / Sign up

Export Citation Format

Share Document