scholarly journals Kazantsev model in non-helical 2.5-dimensional flows

2016 ◽  
Vol 806 ◽  
pp. 627-648 ◽  
Author(s):  
K. Seshasayanan ◽  
A. Alexakis
Keyword(s):  
Turbulent Flows ◽  
Three Dimensional ◽  
Analytical Calculation ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Two Dimensional ◽  
Control Parameters ◽  
Governing Equations ◽  
Field Correlation ◽  
Good Agreement

We study the dynamo instability for a Kazantsev–Kraichnan flow with three velocity components that depend only on two dimensions $\boldsymbol{u}=(u(x,y,t),v(x,y,t),w(x,y,t))$ often referred to as 2.5-dimensional (2.5-D) flow. Within the Kazantsev–Kraichnan framework we derive the governing equations for the second-order magnetic field correlation function and examine the growth rate of the dynamo instability as a function of the control parameters of the system. In particular we investigate the dynamo behaviour for large magnetic Reynolds numbers $Rm$ and flows close to being two-dimensional and show that these two limiting procedures do not commute. The energy spectra of the unstable modes are derived analytically and lead to power-law behaviour that differs from the three-dimensional and two-dimensional cases. The results of our analytical calculation are compared with the results of numerical simulations of dynamos driven by prescribed fluctuating flows as well as freely evolving turbulent flows, showing good agreement.

scholarly journals Turbulent 2.5-dimensional dynamos

2016 ◽  
Vol 799 ◽  
pp. 246-264 ◽  
Author(s):  
K. Seshasayanan ◽  
A. Alexakis
Keyword(s):  
Turbulent Flows ◽  
Large Scale ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Wide Range ◽  
Two Dimensional Flow

We study the linear stage of the dynamo instability of a turbulent two-dimensional flow with three components $(u(x,y,t),v(x,y,t),w(x,y,t))$ that is sometimes referred to as a 2.5-dimensional (2.5-D) flow. The flow evolves based on the two-dimensional Navier–Stokes equations in the presence of a large-scale drag force that leads to the steady state of a turbulent inverse cascade. These flows provide an approximation to very fast rotating flows often observed in nature. The low dimensionality of the system allows for the realization of a large number of numerical simulations and thus the investigation of a wide range of fluid Reynolds numbers $Re$, magnetic Reynolds numbers $Rm$ and forcing length scales. This allows for the examination of dynamo properties at different limits that cannot be achieved with three-dimensional simulations. We examine dynamos for both large and small magnetic Prandtl-number turbulent flows $Pm=Rm/Re$, close to and away from the dynamo onset, as well as dynamos in the presence of scale separation. In particular, we determine the properties of the dynamo onset as a function of $Re$ and the asymptotic behaviour in the large $Rm$ limit. We are thus able to give a complete description of the dynamo properties of these turbulent 2.5-D flows.

Use of the mixing length concept to correctly reproduce velocity profiles of turbulent flows

1998 ◽  
Vol 25 (2) ◽  
pp. 232-240 ◽  
Author(s):  
Jean-Loup Robert ◽  
Mohamed Khelifi ◽  
Ahmed Ghanmi
Keyword(s):  
Turbulent Flows ◽  
Turbulent Viscosity ◽  
Three Dimensional ◽  
Velocity Profiles ◽  
Point Of View ◽  
The Other ◽  
Mixing Length ◽  
Two Dimensional ◽  
Constant Viscosity ◽  
Good Agreement

Since the viscous analogy of turbulence was introduced by Reynolds, many formulations for turbulent viscosity have been proposed. One of them, based on the mixing length concept, is investigated here in a broader point of view. The mixing length concept was used to correctly model turbulent velocity profiles for irregular two-dimensional and three-dimensional domains. Two cases of study were investigated for this purpose: a simple two-dimensional aerodynamic problem and a more complicated three-dimensional hydraulic problem. Results showed that the use of a constant viscosity fails to correctly reproduce experimental observations. On the other hand, the use of the mixing length concept leads to a good agreement between the measured and predicted values.Key words: fluid flow, finite element method, mixing length flow theory, turbulent flow, velocity profiles.

On the nonlinear evolution of three-dimensional disturbances in plane Poiseuille flow

1974 ◽  
Vol 63 (3) ◽  
pp. 529-536 ◽  
Author(s):  
A. Davey ◽  
L. M. Hocking ◽  
K. Stewartson
Keyword(s):  
Pressure Gradient ◽  
Poiseuille Flow ◽  
Nonlinear Evolution ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensional ◽  
Plane Poiseuille Flow ◽  
Governing Equations ◽  
Amplitude Function ◽  
Coupled Partial Differential Equations

The equations governing the nonlinear development of a centred three-dimensional disturbance to plane parallel flow at slightly supercritical Reynolds numbers are obtained, In contrast to the corresponding equation for two-dimensional disturbances, two slowly varying functions are needed to describe the development: the amplitude function and a function related to the secular pressure gradient produced by the disturbance. These two functions satisfy a pair of coupled partial differential equations. The equations derived in Hocking, Stewartson & Stuart (1972) are shown to be incorrect, Some of the properties of the governing equations are discussed briefly.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

scholarly journals Composite hollow truss with multiple vierendeel panels

2013 ◽  
Vol 66 (4) ◽  
pp. 431-438
Author(s):  
Augusto Ottoni Bueno da Silva ◽  
Newton de Oliveira Pinto Júnior ◽  
João Alberto Venegas Requena
Keyword(s):  
Bearing Capacity ◽  
Failure Modes ◽  
Three Dimensional ◽  
Analytical Calculation ◽  
Two Dimensional ◽  
Shear Forces ◽  
Vertical Displacements ◽  
New System ◽  
The Ideal

The aim of this study was to evaluate through analytical calculation, two-dimensional elastic modeling, and three-dimensional plastic modeling, the bearing capacity and failure modes of composite hollow trusses bi-supported with a 15 meter span, varying the number of central Vierendeel panels. The study found the proportion span/3 - span/3 - span/3, as the ideal relationship for the truss - Vierendeel - truss lengths, because by increasing the proportion of the length occupied by the central Vierendeel panels, the new system loses stiffness and no longer supports the load stipulated in the project. Furthermore, they can start presenting excessive vertical displacements and insufficient resistance to external shear forces acting on the panels.

Bifurcation Characteristics of Flows in Rectangular Sudden Expansion Channels

2005 ◽  
Author(s):  
Francine Battaglia ◽  
George Papadopoulos
Keyword(s):  
Reynolds Number ◽  
Laminar Flow ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Expansion Ratio ◽  
Sudden Expansion ◽  
Two Dimensional ◽  
Effective Expansion ◽  
Three Dimensional Simulations

The effect of three-dimensionality on low Reynolds number flows past a symmetric sudden expansion in a channel was investigated. The geometric expansion ratio of in the current study was 2:1 and the aspect ratio was 6:1. Both experimental velocity measurements and two- and three-dimensional simulations for the flow along the centerplane of the rectangular duct are presented for Reynolds numbers in the range of 150 to 600. Comparison of the two-dimensional simulations with the experiments revealed that the simulations fail to capture completely the total expansion effect on the flow, which couples both geometric and hydrodynamic effects. To properly do so requires the definition of an effective expansion ratio, which is the ratio of the downstream and upstream hydraulic diameters and is therefore a function of both the expansion and aspect ratios. When the two-dimensional geometry was consistent with the effective expansion ratio, the new results agreed well with the three-dimensional simulations and the experiments. Furthermore, in the range of Reynolds numbers investigated, the laminar flow through the expansion underwent a symmetry-breaking bifurcation. The critical Reynolds number evaluated from the experiments and the simulations was compared to other values reported in the literature. Overall, side-wall proximity was found to enhance flow stability, helping to sustain laminar flow symmetry to higher Reynolds numbers in comparison to nominally two-dimensional double-expansion geometries. Lastly, and most importantly, when the logarithm of the critical Reynolds number from all these studies was plotted against the reciprocal of the effective expansion ratio, a linear trend emerged that uniquely captured the bifurcation dynamics of all symmetric double-sided planar expansions.

Review of Three Dimensional Dynamic Analyses of Circular Cylinders and Cylindrical Shells

1994 ◽  
Vol 47 (10) ◽  
pp. 501-516 ◽  
Author(s):  
Kostas P. Soldatos
Keyword(s):  
Cylindrical Shells ◽  
Three Dimensional ◽  
Circular Cylinders ◽  
Accurate Information ◽  
Two Dimensional ◽  
Governing Equations ◽  
Complicated Form ◽  
Dynamic Analyses ◽  
Cylindrical Panels ◽  
Elastic Cylinders

There is an increasing usefulness of exact three-dimensional analyses of elastic cylinders and cylindrical shells in composite materials applications. Such analyses are considered as benchmarks for the range of applicability of corresponding studies based on two-dimensional and/or finite element modeling. Moreover, they provide valuable, accurate information in cases that corresponding predictions based on that later kind of approximate modeling is not satisfactory. Due to the complicated form of the governing equations of elasticity, such three-dimensional analyses are comparatively rare in the literature. There is therefore a need for further developments in that area. A survey of the literature dealing with three-dimensional dynamic analyses of cylinders and open cylindrical panels will serve towards such developments. This paper presents such a survey within the framework of linear elasticity.

Cellular flow in a partially filled rotating drum: regular and chaotic advection

2017 ◽  
Vol 825 ◽  
pp. 631-650 ◽  
Author(s):  
Francesco Romanò ◽  
Arash Hajisharifi ◽  
Hendrik C. Kuhlmann
Keyword(s):  
Three Dimensional ◽  
Reynolds Numbers ◽  
Chaotic Advection ◽  
Two Dimensional ◽  
Rotating Drum ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Heteroclinic Connection ◽  
Two Dimensional Flow ◽  
Chaotic Streamlines

The topology of the incompressible steady three-dimensional flow in a partially filled cylindrical rotating drum, infinitely extended along its axis, is investigated numerically for a ratio of pool depth to radius of 0.2. In the limit of vanishing Froude and capillary numbers, the liquid–gas interface remains flat and the two-dimensional flow becomes unstable to steady three-dimensional convection cells. The Lagrangian transport in the cellular flow is organised by periodic spiralling-in and spiralling-out saddle foci, and by saddle limit cycles. Chaotic advection is caused by a breakup of a degenerate heteroclinic connection between the two saddle foci when the flow becomes three-dimensional. On increasing the Reynolds number, chaotic streamlines invade the cells from the cell boundary and from the interior along the broken heteroclinic connection. This trend is made evident by computing the Kolmogorov–Arnold–Moser tori for five supercritical Reynolds numbers.

scholarly journals The Two Dimensional Representation of Three Dimensional Interferometer Measurements

1979 ◽  
Vol 49 ◽  
pp. 19-26
Author(s):  
R.H. Frater
Keyword(s):  
Three Dimensional ◽  
General Purpose ◽  
Two Dimensions ◽  
Two Dimensional ◽  
Dimensional Representation ◽  
General Purpose Computer ◽  
Efficient Processing ◽  
Purpose Computer

SummaryA convolution technique for the reduction of three dimensional interferometer measurements to two dimensions is described. With the addition of relatively simple hardware to a general purpose computer the technique allows fast, efficient processing of three dimensional data.

Vortex rings impinging on walls: axisymmetric and three-dimensional simulations

1993 ◽  
Vol 256 ◽  
pp. 615-646 ◽  
Author(s):  
Paolo Orlandi ◽  
Roberto Verzicco
Keyword(s):  
Numerical Simulations ◽  
Strain Tensor ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Vortex Rings ◽  
Compression Phase ◽  
Vortex Pairing ◽  
The Impact ◽  
Good Agreement ◽  
Three Dimensional Simulations

Accurate numerical simulations of vortex rings impinging on flat boundaries revealed the same features observed in experiments. The results for the impact with a free-slip wall compared very well with previous numerical simulations that used spectral methods, and were also in qualitative agreement with experiments. The present simulation is mainly devoted to studying the more realistic case of rings interacting with a no-slip wall, experimentally studied by Walker et al. (1987). All the Reynolds numbers studied showed a very good agreement between experiments and simulations, and, at Rev > 1000 the ejection of a new ring from the wall was seen. Axisymmetric simulations demonstrated that vortex pairing is the physical mechanism producing the ejection of the new ring. Three-dimensional simulations were also performed to investigate the effects of azimuthal instabilities. These simulations have confirmed that high-wavenumber instabilities originate in the compression phase of the secondary ring within the primary one. The large instability of the secondary ring has been explained by analysis of the rate-of-strain tensor and vorticity alignment. The differences between passive scalars and the vorticity field have been also investigated.

Sign in / Sign up

Export Citation Format

Share Document