Effects of targeting pod modification on F/A-18C Hornet weapons release

2012 ◽  
Vol 116 (1181) ◽  
pp. 743-755 ◽  
Author(s):  
C. W. O’Brien ◽  
M. R. Snyder ◽  
E. N. Hallberg ◽  
A. Cenko
Keyword(s):  
Fluid Dynamics ◽  
Cfd Analysis ◽  
Prior Work ◽  
Cfd Simulations ◽  
Store Separation ◽  
History Of ◽  
Wind Tunnel Data ◽  
Computational Fluid Dynamics Cfd ◽  
Separation Behavior ◽  
Forward Looking

Abstract This paper describes a study that investigated the efficacy of modifications to the trailing end of the externally mounted advanced targeting forward looking infrared pod (ATFLIR) on the store separation characteristics of the F/A-18C aircraft. Prior work by Godiksen suggests that the trailing end of the geometrically similar targeting forward looking infrared pod (TFLIR) is the likely source of shock waves that can adversely impact the trajectory of a recently released store. In our study five different modifications to the aft end of the ATFLIR were analysed using computational fluid dynamics (CFD). The two most promising designs, an ogive shape such as that used in artillery shells and rockets, and a simpler extended but truncated cone shape were then further investigated. The moments that these trailing shapes produced on an adjacent released store were compared. CFD analysis revealed that the simpler cone shape resulted in weaker shocks from the aft end of the pod with a resultant smaller adverse moment on the store. While there is an extensive history of using CFD to predict store separation behavior, results from our study should be compared with wind tunnel data in order to validate the CFD simulations.

scholarly journals Numerical Simulation and Optimization of Wind Effects of Porous Parapets on Low-Rise Buildings with Flat Roofs

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Ye Qiu ◽  
Bingbing San ◽  
Youyi Zhao
Keyword(s):  
Fluid Dynamics ◽  
Momentum Equation ◽  
Cfd Simulations ◽  
Simulation And Optimization ◽  
Wind Tunnel Data ◽  
Computational Fluid Dynamics Cfd ◽  
Simulation Results ◽  
Optimization Methodology ◽  
Conical Vortices ◽  
Flat Roofs

This paper presents a procedure to optimize the porosity of parapets to improve the aerodynamic behavior of low-rise buildings with flat roofs, by coupling an optimization algorithm and computational fluid dynamics (CFD) simulations. The performance of solid parapets to decrease the wind suctions on flat roofs induced by conical vortices was firstly studied, based on four turbulence closure models (standard k-ε, RNG k-ε, SST k-ω, and RSM). The simulation results were validated by comparing with the wind tunnel data. Additionally, the porous parapet was treated as a momentum sink in the governing momentum equation, and the RSM turbulence model was employed. As a result, six optimization studies focusing on the highest mean suction minimization that consider parapet height were presented. The aim of this paper is to search for the best performing porosity through an automatic CFD-based optimization methodology. At low relative heights (hp/H = 0.01∼0.05, hp is the parapet height, and H is the roof height), the porous parapet with optimal porosity in between 38.2% and 52.3% seems to be more effective than solid parapets in attenuating high corner suctions generated by conical vortices; however, the solid parapet gives the best performance in the reduction of wind suctions when hp/H ≥ 0.07.

On Deriving High Pressure Empirical Multiphase Forcing Functions From CFD Analysis

2019 ◽  
Author(s):  
Olivier Macchion ◽  
Stefan Belfroid ◽  
Leszek Stachyra ◽  
Atle Jensen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Pressure ◽  
Pipe Flow ◽  
Experimental Results ◽  
Internal Diameter ◽  
Cfd Analysis ◽  
Empirical Correlations ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Cfd

Abstract Computational Fluid Dynamics (CFD) simulations are used to predict the flow-induced forcing in high-pressure multiphase pipe flow. Furthermore, empirical correlations from the literature is compared and validated against computational and experimental results. Based on the CFD results and in conjunction with the reference 6” (internal diameter (ID)) data, new scaling rules are proposed.

Analysis of an Airfoil Using a Transition and Turbulence Model

2016 ◽  
Vol 819 ◽  
pp. 356-360
Author(s):  
Mazharul Islam ◽  
Jiří Fürst ◽  
David Wood ◽  
Farid Nasir Ani
Keyword(s):  
Fluid Dynamics ◽  
Boundary Layer ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Turbulence Model ◽  
Original Version ◽  
Transitional Region ◽  
Cfd Analysis ◽  
Computational Fluid Dynamics Cfd

In order to evaluate the performance of airfoils with computational fluid dynamics (CFD) tools, modelling of transitional region in the boundary layer is very critical. Currently, there are several classes of transition-based turbulence model which are based on different methods. Among these, the k-kL- ω, which is a three equation turbulence model, is one of the prominent ones which is based on the concept of laminar kinetic energy. This model is phenomenological and has several advantageous features. Over the years, different researchers have attempted to modify the original version which was proposed by Walter and Cokljat in 2008 to enrich the modelling capability. In this article, a modified form of k-kL-ω transitional turbulence model has been used with the help of OpenFOAM for an investigative CFD analysis of a NACA 4-digit airfoil at range of angles of attack.

scholarly journals Rapid pivot feeding in pipefish: flow effects on prey and evaluation of simple dynamic modelling via computational fluid dynamics

2008 ◽  
Vol 5 (28) ◽  
pp. 1291-1301 ◽  
Author(s):  
Sam Van Wassenbergh ◽  
Peter Aerts
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Analytical Model ◽  
Dynamic Modelling ◽  
Head Rotation ◽  
Theoretical Models ◽  
Cfd Simulations ◽  
Deceleration Phase ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Effects

Most theoretical models of unsteady aquatic movement in organisms assume that including steady-state drag force and added mass approximates the hydrodynamic force exerted on an organism's body. However, animals often perform explosively quick movements where high accelerations are realized in a few milliseconds and are followed closely by rapid decelerations. For such highly unsteady movements, the accuracy of this modelling approach may be limited. This type of movement can be found during pivot feeding in pipefish that abruptly rotate their head and snout towards prey. We used computational fluid dynamics (CFD) to validate a simple analytical model of cranial rotation in pipefish. CFD simulations also allowed us to assess prey displacement by head rotation. CFD showed that the analytical model accurately calculates the forces exerted on the pipefish. Although the initial phase of acceleration changes the flow patterns during the subsequent deceleration phase, the accuracy of the analytical model was not reduced during this deceleration phase. Our analysis also showed that prey are left approximately stationary despite the quickly approaching pipefish snout. This suggests that pivot-feeding fish need little or no suction to compensate for the effects of the flow induced by cranial rotation.

scholarly journals Effect of hydraulic and geometric factors upon leakage flow rate in pressurized pipes

RBRH ◽  
2021 ◽  
Vol 26 ◽  
Author(s):  
Mayara Francisca da Silva ◽  
Fábio Veríssimo Gonçalves ◽  
Johannes Gérson Janzen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Rate ◽  
Leakage Flow ◽  
Cfd Simulations ◽  
Mean Velocity ◽  
Leakage Flow Rate ◽  
Geometric Factors ◽  
Leakage Area ◽  
Computational Fluid Dynamics Cfd

ABSTRACT Computational Fluid Dynamics (CFD) simulations of a leakage in a pressurized pipe were undertaken to determine the empirical effects of hydraulic and geometric factors on the leakage flow rate. The results showed that pressure, leakage area and leakage form, influenced the leakage flow rate significantly, while pipe thickness and mean velocity did not influence the leakage flow rate. With relation to the interactions, the effect of pressure upon leakage flow rate depends on leakage area, being stronger for great leakage areas; the effects of leakage area and pressure on leakage flow rate is more pronounced for longitudinal leakages than for circular leakages. Finally, our results suggest that the equations that predict leakage flow rate in pressurized pipes may need a revision.

scholarly journals The Aerodynamics of a Diabolo

2021 ◽  
Author(s):  
Darren Jia
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Angular Momentum ◽  
Flow Pattern ◽  
High Spin ◽  
Angular Speed ◽  
Geometric Shape ◽  
Cfd Simulations ◽  
Resistive Torque ◽  
Computational Fluid Dynamics Cfd

Diabolo is a popular game in which the object can be spun at up to speeds of 5000 rpm. This high spin velocity gives the diabolo the necessary angular momentum to remain stable. The shape of the diabolo generates an interesting air flow pattern. The viscous air applies a resistive torque on the fast spinning diabolo. Through computational fluid dynamics (CFD) simulations it's shown that the resistive torque has an interesting dependence on the angular speed of the diabolo. Further, the geometric shape of the diabolo affects the dependence of torque on angular speed.

Sign in / Sign up

Export Citation Format

Share Document