The effect of density and nitrogen fertilizer on the growth and yield of maize (Zea maysL.) in Nigeria

1986 ◽  
Vol 107 (3) ◽  
pp. 573-578 ◽  
Author(s):  
E. O. Lucas
Keyword(s):  
Nitrogen Fertilizer ◽  
Dry Matter ◽  
Morphological Characters ◽  
Application Rate ◽  
Growth And Yield ◽  
High Yield ◽  
Nitrogen Application ◽  
Wide Range ◽  
Number Of Leaves ◽  
Applied Nitrogen

SummarFARZ 27, a high-yield maize variety, was grown in 1984 and 1985 over a wide range of density treatments (1·9– 11·1 plants/m2) and with four rates of nitrogen application (0, 75, 100 and 150 kg N/ha) in Ibadan. south-western Nigeria.There was no significant density or fertilizer effect on morphological characters of number of leaves per plant, height or stem diameter. For total dry-matter yield, the highest density of planting gave the highest yield although less dry matter was obtained in the 1985 experiment than in the 1984 experiment. Optimum density for grain production in both years was 8·8 plants/m2. There is an indication that there is no need to increase density of planting of maize beyond 80000 plants/ha in the south-western part of Nigeria. Plants without applied nitrogen fertilizer gave significantly lower total dry-matter and grain yields than plants with applied nitrogen. Highest grain yield was obtained with 150 kg N/ha in both years. By doubling the nitrogen application rate from the present recommended level of 75 kg N/ha to 150 kg N/ha an average increase of 0·42t/ha of maize was obtained in both years. With the present prices of fertilizer and maize, this increase is economical. It seems therefore that more revenue would accrue to the farmers by using 150 kg N/ha on the ‘FARZ series’ of maize instead of the present recommendation of 75 kg N/ha.

Radiation absorption, growth and yield of cereals

1978 ◽  
Vol 91 (1) ◽  
pp. 47-60 ◽  
Author(s):  
J. N. Gallagher ◽  
P. V. Biscoe
Keyword(s):  
Dry Matter ◽  
Growing Season ◽  
Growth Efficiency ◽  
Growth And Yield ◽  
Radiation Absorption ◽  
Exponential Equation ◽  
Crop Cover ◽  
Crop Growth Rate ◽  
Wide Range ◽  
Total Crop

SummaryAnalysis of measurements of absorbed radiation and leaf area indices of wheat and barley crops showed that throughout most of growth the fraction of absorbed solar radiation could be described by a simple exponential equation.For several of these crops grown under a wide range of weather and husbandry at Sutton Bonington and Rothamsted, 2-weekly values of crop growth rate (C) were closely related to radiation absorbed until ear emergence and about 3·0 g of dry matter (D.M.) were produced by each MJ of photosynthetically active radiation (PAR) absorbed. Final crop weight was closelyrelated to total PAR absorbed during growth (SA); on average about 2·2 g D.M. were produced per MJ absorbed, equivalent to a growth efficiency (Eg) of approximately 3·9%. Unfertilized and drought-stressed crops had a smaller Eg.The fraction of total crop D.M. harvested as grain (harvest index) varied more for wheat than for barley. Calculations of a maximum realizable grain yield made using the largest values of Eg and SA for the crops measured and assuming a harvestindex of 0.53 (achieved in an experimental crop) showed a grain D.M. yield of 10·3 t D.M./ha to be possible. To achieve such a yield would require full crop cover from the beginning of April until the end of July in a typical English growing season.

The Effect of Pruning and Several Kinds of Growing Media Fertigation Hydroponic Systems Against Protection and Production of Melons (Cucumis Melo L.)

Nabatia ◽  
2016 ◽  
Vol 4 (2) ◽  
pp. 57-63
Author(s):  
M Abror ◽  
M Koko Ardiansyah
Keyword(s):  
Plant Height ◽  
Cucumis Melo ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Leaf Number ◽  
Growing Media ◽  
Hydroponic System ◽  
Wide Range ◽  
Number Of Leaves ◽  
Cucumis Melo L

This study aims to determine the effect of trimming with a wide variety of growing media hydroponic system fertigation on growth and yield of melon. Research will be conducted in the green house (House of plastic) UMSIDA Agriculture Faculty, Campus 2, Gelam, Candi, Sidoarjo, research time between the months of March to June 2016 using analysis of variance and continued test HSD 5%. The variables measured were plant height, leaf number, level of sweetness of fruit, fruit weight, high-fruit, thickness of the flesh of the fruit, conclusion from this research is going on the effect of trimming and a wide variety of growing media hydroponic system fertigation in treatment PM5 (trimming down, kokopit). There was also a real influence on the treatment PM6 (without pruning, kokopit) .In observation of plant height, leaf number, fruit weight, and high fruit. And also happens to influence a wide range of growing media on growth and yield of melon on hydroponics fertigation system, the PM6 treatment (without pruning, kokopit) had the highest rates in the observation of plant height, weight of the fruit, and the number of leaves.

scholarly journals Effect of Sulphur and GA3 on the Growth and Yield of Onion

2013 ◽  
Vol 21 (1-2) ◽  
pp. 57-63 ◽  
Author(s):  
MHA Rashid
Keyword(s):  
Dry Matter ◽  
Matter Content ◽  
Growth And Yield ◽  
Control Treatment ◽  
Dry Matter Content ◽  
Number Of Leaves ◽  
Four Levels ◽  
Experimental Findings ◽  
Almost All ◽  
Bulb Yield

An experiment was conducted at the Horticulture Farm of the Bangladesh Agricultural University, Mymensingh to evaluate the effects of sulphur and GA3 on the growth and yield performance of onion cv. BARI Peaj-1. The experiment included four levels of sulphur viz., 0 (control), 15, 30 and 45 kg/ha and four concentrations of GA3 viz., 0 (control), 50, 75, 100 ppm. The experimental findings revealed that sulphur and GA3 had significant influence on plant height, number of leaves per plant, bulb diameter and length, individual bulb weight, splitted and rotten bulb, bulb dry matter content and bulb yield. The highest bulb yield (13.85 t/ha) was recorded from 30 kg S/ha, while the lowest bulb yield (11.20 t/ha) was obtained from control. Most of the parameters showed increasing trend with the higher concentration of GA3. Application of GA3 @ 100 ppm gave the maximum bulb yield (15.23 t/ha), while the minimum value (10.10 t/ha) was observed from control. Almost all the parameters were significantly influenced by combined treatments of sulphur and GA3 except bulb length of onion. The maximum bulb dry matter content (13.50%) and bulb yield (17.10 t/ha) were produced from the application of sulphur @ 30 kg/ha with 100ppm GA3, while the minimum bulb dry matter content (9.23%) and bulb yield (9.33 t/ha) were recorded from control treatment of sulphur with GA3.DOI: http://dx.doi.org/10.3329/pa.v21i1-2.16749 Progress. Agric. 21(1 & 2): 57 - 63, 2010

scholarly journals Effect of Planting Date and Gibberellic Acid on the Growth and Yield of Garlic

2010 ◽  
pp. 132-140 ◽  
Author(s):  
MA Islam ◽  
MH Reza ◽  
SMAHM Kamal ◽  
MA Wazed ◽  
KM Islam
Keyword(s):  
Gibberellic Acid ◽  
Plant Height ◽  
Dry Matter ◽  
Dry Weight ◽  
Planting Date ◽  
Growth And Yield ◽  
Planting Time ◽  
Local Cultivar ◽  
Number Of Leaves ◽  
Bulb Yield

An experiment was conducted with a local cultivar of garlic to study the effects of planting date and gibberellic acid on the growth and yield of garlic at the field laboratory of the Department of Crop Botany, Bangladesh Agricultural University, Mymensingh during November 2001 to April 2002. Early planting influenced the plant height, leaf number, bulb diameter and total dry matter. With the delay in planting time starting from November 7, the yield was chronologically reduced in later plantings. Significantly the highest bulb yield (2.67 t/ha) was recorded when planting was done on November 7 and lowest yield (0.92 t/ha) was obtained from December 22 planted crop. Bulb yield was higher in control plants than those of GA3 treated plants. The interaction effects of planting date and different concentrations of GA3 differed significantly in respect of plant height, number of leaves, bulb diameter and dry weight of roots, leaves and bulbs and yield of garlic.

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

Milk production from cows grazing on tropical grass pastures. 1. Effects of stocking rate and level of nitrogen fertilizer on the pasture and diet

1985 ◽  
Vol 25 (3) ◽  
pp. 505 ◽  
Author(s):  
TM Davison ◽  
RT Cowan ◽  
RK Shepherd ◽  
P Martin
Keyword(s):  
Protein Content ◽  
Milk Production ◽  
Nitrogen Fertilizer ◽  
Crude Protein ◽  
Dry Matter ◽  
Fertilizer Application ◽  
Stocking Rate ◽  
Crude Protein Content ◽  
Stocking Rates ◽  
Applied Nitrogen

A 3-year experiment was conducted at Kairi Research Station on the Atherton Tablelands, Queensland, to determine the effects of stocking rate and applied nitrogen fertilizer on the pasture yield and composition, diet selection by cows, and soil fertility of Gatton panic (Panicum maximum cv. Gatton) pastures. Thirty-two Friesian cows were used in a 4x2 factorial design: four stocking rates (2.0, 2.5, 3.0 and 3.5 cows/ha), each at two rates of fertilizer application 200 and 400 kg N/ha.year. The higher rate of fertilization increased the pasture green dry matter on offer at all samplings (P < 0.01); the increase ranged from 1 106 kg/ha in summer to 548 kg/ha in spring. Green dry matter decreased ( P< 0.0 1) with increasing stocking rate, with mean yields of 3736 and 2384 kg/ha at 2.0 and 3.5 cows/ha, respectively. Weed yields increased over the 3 years at the higher stocking rates for pastures receiving 200 kg N/ha.year. The crude protein content of leaf and stem increased with increasing stocking rate and amount of applied nitrogen fertilizer. Values ranged from 12.1 to 26.5% of dry matter (DM) in leaf and from 3.7 to 13.8% DM in stem. In leaf, sodium concentration (range 0.05-0.20% DM) was increased, while phosphorus concentration (range 0.21-0.44% DM) was decreased by the higher rate of fertilizer application. Plant sodium and phosphorus levels were inadequate for high levels of milk production. Dietary leaf content and crude protein contents were consistently increased by both a reduced stocking rate, and the higher rate of fertilization. Cows were able to select for leaf and at the lowest stocking rate, leaf in the diet averaged 38%; while the leaf content of the pasture was 20%. Dietary leaf content ranged from 38 to 57% in summer and from 11 to 36% in winter. Dietary crude protein ranged from 13 to 15% in summer and from 7 to 11% in winter and was positively correlated with pasture crude protein content and dietary leaf percentage. Soil pH decreased (P<0.05) from an overall mean of 6.3 in 1976 to 6.1 at 200 N and 5.8 at 400 N in 1979. Soil phosphorus status remained stable, while calcium and magnesium levels were lower (P<0.01) after 3 years.

scholarly journals Integrated nutrient management on soil fertility, growth and yield of tomato

2014 ◽  
Vol 11 (1) ◽  
pp. 33-40 ◽  
Author(s):  
MR Islam ◽  
MAH Chowdhury ◽  
BK Saha ◽  
MM Hasan
Keyword(s):  
Soil Fertility ◽  
Plant Height ◽  
Nutrient Management ◽  
Morphological Characters ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Integrated Nutrient Management ◽  
Combined Application ◽  
Number Of Leaves ◽  
Number Of Branches

To evaluate the effects of integrated nutrient management on growth and yield of BARI tomato-14 and soil fertility, a pot experiment was conducted in the net house of the department of Agricultural Chemistry of Bangladesh Agricultural University, Mymensingh during the period from October 2011 to April 2012. The experiment was laid out in a completely randomized design with 11 treatments and 3 replications. Treatments were control, RDCF100, 75% RDCF, 50% RDCF, 75% RDCF + PM2 t /ha, 75% RDCF + RS3 t /ha, 75% RDCF + PHRD, 50% RDCF + PM3 t /ha, 50% RDCF + RS5 t /ha, 50% RDCF + PHRD, PM3 t /ha + RS5 t /ha + PHRD. Among the treatments applied in combination of PM2 t /ha+ 75% of RDCF excelled in growth trends of morphological characters like plant height, number of branches plant- 1, number of leaves plant-1; available soil P and S. But sole application of RDCF100 recorded higher values for almost all morphological characters namely number of branches plant-1, number of leaves plant-1, fruit diameter, fruit weight plant-1 and yield of tomato following the same trend as seen in combined application of CF and PM. Among the plant hormone applied in combination, RDCF75% + PHRD showed the highest plant height. The more number of leaves plant-1, number of branches plant-1, yield and yield parameters as compared to other treatments were also significantly influenced by application of PH. Combined application of 50% of RDCF+RS5 t /ha increased exchangeable soil K. PM3 t /ha+ RS5 t /ha+ PHRD conserved more organic carbon and total soil N. Results showed that the integrated use of PM, RS along with CF increased the availability of nutrients throughout the growth period by maintaining the long term productivity for sustainable production of tomato. DOI: http://dx.doi.org/10.3329/jbau.v11i1.18204 J. Bangladesh Agril. Univ. 11(1): 33-40, 2013

scholarly journals Effect of foliar application of gibberellic acid on different growth contributing characters of mungbean

2018 ◽  
Vol 29 (3) ◽  
pp. 233-238
Author(s):  
MM Rahman ◽  
ABMMM Khan ◽  
MM Hasan ◽  
LA Banu ◽  
MHK Howlader
Keyword(s):  
Dry Matter ◽  
Foliar Application ◽  
Growth And Yield ◽  
Optimum Level ◽  
Yield Parameters ◽  
Number Of Leaves ◽  
Pod Length ◽  
Dry Matter Weight ◽  
Thousand Seed Weight ◽  
Physiological Characters

The comparative growth and yield performances between two Mungbean (BARI Mung 6 and BARI Mung 5) varieties with foliar application of GA3 (0, 50, 100 and 150 ppm) were studied to find out the suitable variety and optimum level of GA3 application. The design of experiment followed was RCBD. Data on morpho-physiological characteristics were recorded at 15, 25, 35, 45and 55 days after sowing (DAS) and yield contributing parameters were recorded only at harvest stage. The results showed that application of GA3 @ 100 ppm produced better performance on morpho-physiological characters namely, plant height (56.59cm), number of leaves per plant (10.75), branches per plant (4.75), length of root (24.73cm), total dry matter weight (12.67g)which were recorded from the variety BARI mung 6 with the foliar application of GA3 @ 100 ppm. Yield contributing characters were also showed the highest performance in terms of number of pods per plant (23.40), pod length (6.67cm), number of seeds per pod (12.82), thousand seed weight (33.95 g), seed yield (7.53 g/plant and 1.92 t ha–1), and harvest index (35.36%) which were the highest with the application of 100 ppm GA3 in case of BARI Mung 6. Single and combined effects of treatments were found statistically significant. Between two varieties BARI Mung 6, among the treatments GA3 @ 100 ppm as foliar application and interaction effect of GA3 @ 100 ppm and BARI mung 6 showed the highest performance in respect of all growth and yield parameters. Progressive Agriculture 29 (3): 233-238, 2018

The effect of density of planting on the growth of two Phaseolus vulgaris varieties in England

1976 ◽  
Vol 87 (1) ◽  
pp. 89-99 ◽  
Author(s):  
E. O. Lucas ◽  
G. M. Milbourn
Keyword(s):  
Phaseolus Vulgaris ◽  
Seed Yield ◽  
Dry Matter ◽  
Planting Density ◽  
High Yield ◽  
Vegetative Tissue ◽  
Wide Range ◽  
The Relationship ◽  
Pod Photosynthesis ◽  
Number Of Branches

SummaryThe growth and development of two varieties of Phaseolus vulgaris (Purley King and Limelight) were compared in two experiments in 1973 and 1974 at a range of planting density from 20 to 100 seeds/m2. Within this range, the relationship between seed yield and density in Purley King was asymptotic, although there was a suggestion that if even higher densities had been tested, a downward trend in yield might have occurred. The optimum density of planting for Purley King in Expt 1 was 50 seeds/m2 while that for Limelight was 40 seeds/m2. The corresponding densities in Expt 2 were 75 and 50 seeds/m2 respectively. Although number of branches per plant generally decreased with increasing density, there was no significant density effect on the number of nodes per plant. Thus stabilization of seed yield occurred even at quite low densities. Although in the low-density treatments, less vegetative tissue was produced, the peak of dry-matter yield occurred later after flowering and the slower subsequent senescence ensured the presence of active photosynthetic tissue throughout the pod-fill stage. Less pod retention occurred at high density which, combined with the ability of widely spaced plants to produce pods over a longer period, resulted in a similar number of pods per unit area over a wide range of density.Although the variety Purley King produced more than double the number of mature pods from its extra nodes and branches, it was outyielded by Limelight by 35% from the combined effect of more seeds per pod and a higher mean seed weight. Limelight also produced this high yield with less vegetative tissue. In both varieties it appeared that pod photosynthesis could take place, in Purley King because the pods were borne on higher nodes above the canopy and in Limelight due to the earlier senescence of its smaller leaf area. However, in spite of the apparent physiological advantages of Limelight, the pods are not borne high enough on this plant to enable satisfactory mechanical harvesting.

Effect of nitrogen and zinc on nodulation, growth and yield of cowpea (Vigna unguiculata)

2016 ◽  
Vol 39 (1) ◽  
Author(s):  
R. G. Upadhyay ◽  
Anita Singh
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Dry Matter ◽  
Growth And Yield ◽  
Production Plant ◽  
Plant Seeds ◽  
Matter Production ◽  
Number Of Leaves ◽  
Four Levels ◽  
Number Of Branches

A pot experiment was conducted to determine the effect of zinc and nitrogen on growth, nodulation pattern and yield of cowpea. The treatments were four levels of nitrogen ( 0 , 10, 20 and 30 kg/ha) and four levels of zinc (0, 5, 10 and 15 kg/ha). Application of various levels of nitrogen significantly increased dry matter production/plant , plant height number of branches/ plant, effective nodules/ plant, total nodule / plant, effective nodules weight /plant, pods/plant , seeds/pod and grain yield. Similarly zinc significantly increased plant height, branches / plant, number of leaves/plant, dry matter /plant, effective nodules weight /plant and grain yield. There was no significant interaction between nitrogen and zinc on grain yield.

Sign in / Sign up

Export Citation Format

Share Document