Hydrophobic surface areas and net charges of αs1-, κ-casein and αs1-casein: κ-casein complex

1980 ◽  
Vol 47 (1) ◽  
pp. 123-129 ◽  
Author(s):  
Shun'ichi Dosako ◽  
Shuichi Kaminogawa ◽  
Shin'ichi Taneya ◽  
Kunio Yamauchi
Keyword(s):  
Complex Formation ◽  
Surface Area ◽  
Electrostatic Interaction ◽  
Hydrophobic Surface ◽  
The Other ◽  
Salting Out ◽  
Net Charge ◽  
Surface Areas ◽  
Other Hand ◽  
Net Charges

SummaryHydrophobic surface areas of αs1- and κ-casein polymers and αs1-casein: κ-casein complex were estimated by the salting-out technique using various salts according to the theory of Melander & Horvath (1977). Calculated hydrophobic surface areas of αs1, κ-casein polymers and αs1-casein: κ-casein complex were 1976, 3571 and 2989 Å2 respectively. Assuming that κ-casein polymer dissociated into 4 particles in complex formation and that 1 mole of αs1-casein: κ-casein complex was produced from 2 mole of αs1-casein polymer and one of these dissociated κ-casein particles, the hydrophobic surface area of αs1-casein: κ-casein complex was less than those of 2 mole of αs1-casein polymer plus a quarter κ-casein polymer. On the other hand, the net charge of αs1-casein: κ-casein complex was nearly equal to that of 2 mole of αs1-casein polymer plus a quarter of κ-casein polymer. From these results, it was concluded that the complex formation of αs1- and κ-casein polymers was hydrophobic and that electrostatic interaction did not participate in complex formation.

Polarization and apparent dipole moments of some symmetrical molecules

1991 ◽  
Vol 56 (2) ◽  
pp. 406-410 ◽  
Author(s):  
Otto Exner ◽  
Ivan Mach
Keyword(s):  
Complex Formation ◽  
Standard Method ◽  
Dipole Moments ◽  
The Other ◽  
Atomic Polarization ◽  
Other Hand ◽  
Unknown Structure ◽  
Apparent Orientation

Polarization and apparent dipole moments of a series of symmetrical molecules were determined by the standard method in three solvents: benzene, p-xylene, and mesitylene. Their explanation by complex formation with solvent applies only in the case of 1,4-dicyanobenzene and 4,4’-dicyanobiphenyl since the apparent orientation polarizations (PO.app) are large and depend strongly on solvent. On the other hand, 1,4-dihalogenbenzenes do not form any complexes and PO.appis virtually zero. 1,4-Dihalogenbicyclo[2,2,2]octanes reveal also considerable PO.app which is attributed mainly to enhanced atomic polarization but – in the case of heavier halogens – also partly to complexes of unknown structure.

CATALYTIC ACTIVITY FOR METHANE OXIDATION OF GOETHITE SUPPORTED ON ALUMINA

2006 ◽  
Vol 20 (25n27) ◽  
pp. 4249-4254 ◽  
Author(s):  
KEI-ICHIRO MURAI ◽  
KOHEI TOMITA ◽  
SUGURU TOJO ◽  
TOSHIHIRO MORIGA ◽  
ICHIRO NAKABAYASHI
Keyword(s):  
Catalytic Activity ◽  
Specific Surface ◽  
Methane Oxidation ◽  
Model Experiment ◽  
The Other ◽  
Catalytic Activities ◽  
Surface Areas ◽  
Oxidation Of Methane ◽  
Other Hand ◽  
Specific Surface Areas

Two kinds of α- Fe 2 O 3 catalysts supported on χ- Al 2 O 3 and γ- Al 2 O 3 were synthesized. α- Fe 2 O 3 was prepared from α- FeOOH . As a model experiment, an investigation was made with the oxidation of methane. As all catalysts with various Fe contents supported on χ- Al 2 O 3 with various Fe contents had higher specific surface areas than those supported on γ- Al 2 O 3, α- Fe 2 O 3/χ- Al 2 O 3 catalyst has higher catalytic activities than α- Fe 2 O 3/γ- Al 2 O 3 catalyst. From SEM-EDS analyses, it is concluded that in α- Fe 2 O 3/χ- Al 2 O 3 catalyst, α- Fe 2 O 3 exists mainly on the surface of the support, because of flatness of the surface of χ- Al 2 O 3. On the other hand, in the case of α- Fe 2 O 3/γ- Al 2 O 3 catalyst, as the surface of support, γ- Al 2 O 3, is uneven, α- Fe 2 O 3 do not partially exist on the surface but in the pores.

Studies on the Effect of Plasminogen Activator on the Interaction between α2-Macroglobulin and Plasmin

1978 ◽  
Vol 40 (02) ◽  
pp. 377-386 ◽  
Author(s):  
Naotika Toki ◽  
Sumiyoshi Takasugi ◽  
Hiroyuki Sumi ◽  
Takuso Yamura
Keyword(s):  
Complex Formation ◽  
Plasminogen Activator ◽  
Molecular Form ◽  
The Other ◽  
Free Form ◽  
Inhibitory Effects ◽  
Other Hand ◽  
Α2 Macroglobulin ◽  
Human Plasminogen ◽  
The Difference

SummarySix different plasmins were prepared by incubating human plasminogen with various amounts of streptokinase or urokinase. It was confirmed that the six different plasmins possessed similar caseinolytic activities, and the inhibitory effects of α 1-antitrypsin on caseinolytic activities of the six different plasmins were all the same. On the other hand, interactions between the six different plasmins and α2-macroglobulin were complicated. Plasmins activated by cleavage of plasminogen were almost immediately or effectively inhibited by α2-macroglobulin. However, plasmin activated by complex formation of plasminogen with streptokinase was not so immediately or effectively inhibited by α2- macroglobulin. It was supposed that the difference between these two results on the interaction between plasmin and α2-macroglobulin might be due to the difference in molecular form of plasmin. In the present study, it was also confirmed that streptokinase or urokinase, in free form in the reaction mixture, interfered with the interaction between plasmin and α2-macroglobulin. The cause for such interference was discussed.

scholarly journals IRAK1-dependent Regnase-1-14-3-3 complex formation controls Regnase-1-mediated mRNA decay

eLife ◽  
2021 ◽  
Vol 10 ◽  
Author(s):  
Kotaro Akaki ◽  
Kosuke Ogata ◽  
Yuhei Yamauchi ◽  
Noriki Iwai ◽  
Ka Man Tse ◽  
...  
Keyword(s):  
Complex Formation ◽  
Inflammatory Mediators ◽  
Mrna Decay ◽  
Human Cells ◽  
The Other ◽  
Structural Domain ◽  
Phosphorylation Sites ◽  
Toll Like Receptor ◽  
Other Hand

Regnase-1 is an endoribonuclease crucial for controlling inflammation by degrading mRNAs encoding cytokines and inflammatory mediators in mammals. However, it is unclear how Regnase-1-mediated mRNA decay is controlled in interleukin (IL)-1β- or Toll-like receptor (TLR) ligand-stimulated cells. Here, by analyzing the Regnase-1 interactome, we found that IL-1β or TLR stimulus dynamically induced the formation of Regnase-1-β-transducin repeat-containing protein (βTRCP) complex. Importantly, we also uncovered a novel interaction between Regnase-1 and 14-3-3 in both mouse and human cells. In IL-1R/TLR-stimulated cells, the Regnase-1-14-3-3 interaction is mediated by IRAK1 through a previously uncharacterized C-terminal structural domain. Phosphorylation of Regnase-1 at S494 and S513 is critical for Regnase-1-14-3-3 interaction, while a different set of phosphorylation sites of Regnase-1 is known to be required for the recognition by βTRCP and proteasome-mediated degradation. We found that Regnase-1-14-3-3 and Regnase-1-βTRCP interactions are not sequential events. Rather, 14-3-3 protects Regnase-1 from βTRCP-mediated degradation. On the other hand, 14-3-3 abolishes Regnase-1-mediated mRNA decay by inhibiting Regnase-1-mRNA association. In addition, nuclear-cytoplasmic shuttling of Regnase-1 is abrogated by 14-3-3 interaction. Taken together, the results suggest that a novel inflammation-induced interaction of 14-3-3 with Regnase-1 stabilizes inflammatory mRNAs by sequestering Regnase-1 in the cytoplasm to prevent mRNA recognition.

scholarly journals Profitability of biomass production in relation to harvesting technology

2020 ◽  
Vol 154 ◽  
pp. 01010
Author(s):  
Dariusz Kwaśniewski ◽  
Maciej Kuboń ◽  
Urszula Malaga-Toboła
Keyword(s):  
Theoretical Calculation ◽  
Surface Area ◽  
Biomass Production ◽  
Production Costs ◽  
The Other ◽  
Product Form ◽  
Computer Application ◽  
Other Hand

The aim of the paper was to determine the production costs and profitability of biomass production from Virginia mallow including various harvesting technologies. The paper covered theoretical calculation of the production costs of biomass form Virginia mallow with the use of the computer application “Biocalculator”. Calculations were made for a plantation with the surface area of 5 ha and four technologies of harvesting and the product form (pressed straw, chaff). The paper determines the profitability of production of biomass from Virginia mallow for four variants of sale prices of biomass at the level of 100, 120, 140 and 150 PLN∙t-1. In case of T1 technology all assumed prices of sale of Virginia mallow biomass with the obtained production costs were profitable. On the other hand, in T3 and T4 technology, the scope of sale prices from 120 to 150 PLN∙t-1 caused that the biomass production was profitable. While, the least profitable was application of T2 technology where only at the assessment of biomass sale 150 PLN∙t-1 production was profitable and in the remaining price options the profit was not obtained.

scholarly journals 41 Geometric change in valvular apparatus during tricuspid repair for severe tricuspid regurgitation

2020 ◽  
Vol 21 (Supplement_1) ◽  
Author(s):  
K Obase ◽  
I Matsumaru ◽  
S Nakaji ◽  
T Miura ◽  
K Eishi
Keyword(s):  
Surface Area ◽  
Tricuspid Regurgitation ◽  
The Other ◽  
Papillary Muscles ◽  
Severe Tricuspid Regurgitation ◽  
Other Hand ◽  
Transgastric Approach ◽  
Tricuspid Repair

Abstract Background For repairing severe tricuspid regurgitation (TR) with leaflet tethering, our team employs spiral suspension procedure, in which papillary muscles (PMs) are approximated and suspended towards annulus by suture in addition to annuloplasty. Purpose To visualize subtricuspid apparatus and investigate its geometric change by the procedure, comparing with annuloplasty alone. Methods 11 patients who underwent spiral suspension and 10 patients who underwent annuloplasty alone were studied. Using 3D dataset derived from transesophgeal echocardiography with transgastric approach, the distances between the mid septal annulus (point C) and the anterior PM tip (point A) and posterior PM (point P) were calculated. Also, annular perimeter, leaflet surface area and tenting height were measured Results In all cases, PM tips could be visualized and identified for the measurements. By spiral suspension, the distance CA and tenting height were significantly reduced. On the other hand, by annuloplasty alone, CA and tenting height were likely to be increased but statistically not significant. Conclusions Spiral suspension ameliorated leaflet tethering with relocating PMs. Annuloplasty alone reduced leaflet surface area, which indicates increase of coaptation surface. Interestingly, PM tip- annulus distance and tenting height were possibly increased by annuloplasty. Further investigation is need in large number. Result of measurements Annuloplasty alone Spiral suspension Pre-op Post-op Pre-op Post-op Annular perimeter, mm 120.9 ± 11.2 78.8 ± 5.1* 142.4 ± 18.2* 81.1 ± 6.4** Leaflet surface area, cm2 13.1 ± 3.1 5.6 ± 0.9* 19.3 ± 4.8* 5.8 ± 0.8** Tenting height, mm 2.8 ± 2.3 3.1 ± 1.2 7.0 ± 4.8* 2.9 ± 2.6** CA, mm 27.3 ± 3.9 29.1 ± 6.2 35.7 ± 6.9* 29.6 ± 5.2** CP, mm 33.1 ± 6.0 33.8 ± 9.4 38.5 ± 8.2 33.9 ± 6.1 *p < 0.05, vs Annuloplasty alone pre-op **p < 0.05, vs Spiral suspension pre-op Abstract 41 Figure. Pre- and post-operative valve apparatus

A study of cometary eruptions through OH radio-lines

1999 ◽  
Vol 173 ◽  
pp. 249-254
Author(s):  
A.M. Silva ◽  
R.D. Miró
Keyword(s):  
Short Duration ◽  
Growth Curves ◽  
The Other ◽  
Initial Mass ◽  
Radio Lines ◽  
Other Hand ◽  
Sudden Rise

AbstractWe have developed a model for theH2OandOHevolution in a comet outburst, assuming that together with the gas, a distribution of icy grains is ejected. With an initial mass of icy grains of 108kg released, theH2OandOHproductions are increased up to a factor two, and the growth curves change drastically in the first two days. The model is applied to eruptions detected in theOHradio monitorings and fits well with the slow variations in the flux. On the other hand, several events of short duration appear, consisting of a sudden rise ofOHflux, followed by a sudden decay on the second day. These apparent short bursts are frequently found as precursors of a more durable eruption. We suggest that both of them are part of a unique eruption, and that the sudden decay is due to collisions that de-excite theOHmaser, when it reaches the Cometopause region located at 1.35 × 105kmfrom the nucleus.

Closing the GAP—A 5Å Scanning Microscope

1969 ◽  
Vol 27 ◽  
pp. 6-7
Author(s):  
A. V. Crewe
Keyword(s):  
Normal Form ◽  
The Other ◽  
Resolving Power ◽  
Scanning Microscope ◽  
Conventional Microscope ◽  
Other Hand ◽  
Closing The Gap ◽  
Thermal Sources ◽  
Better Than ◽  
Transmission Microscope

We have become accustomed to differentiating between the scanning microscope and the conventional transmission microscope according to the resolving power which the two instruments offer. The conventional microscope is capable of a point resolution of a few angstroms and line resolutions of periodic objects of about 1Å. On the other hand, the scanning microscope, in its normal form, is not ordinarily capable of a point resolution better than 100Å. Upon examining reasons for the 100Å limitation, it becomes clear that this is based more on tradition than reason, and in particular, it is a condition imposed upon the microscope by adherence to thermal sources of electrons.

Cell morphology, volume, and surface area determinations from multilevel contouring within HVEM micrographs of serial sections and whole-cell mounts

1987 ◽  
Vol 45 ◽  
pp. 588-589
Author(s):  
M. Marko ◽  
A. Leith ◽  
D. Parsons
Keyword(s):  
Surface Area ◽  
Electron Micrographs ◽  
Cell Morphology ◽  
Individual Variation ◽  
Serial Section ◽  
Stereo Pair ◽  
Complex Structures ◽  
Serial Sections ◽  
Surface Areas ◽  
Computer Based

The use of serial sections and computer-based 3-D reconstruction techniques affords an opportunity not only to visualize the shape and distribution of the structures being studied, but also to determine their volumes and surface areas. Up until now, this has been done using serial ultrathin sections.The serial-section approach differs from the stereo logical methods of Weibel in that it is based on the Information from a set of single, complete cells (or organelles) rather than on a random 2-dimensional sampling of a population of cells. Because of this, it can more easily provide absolute values of volume and surface area, especially for highly-complex structures. It also allows study of individual variation among the cells, and study of structures which occur only infrequently.We have developed a system for 3-D reconstruction of objects from stereo-pair electron micrographs of thick specimens.

Life Beyond 1MeV

1980 ◽  
Vol 38 ◽  
pp. 30-33
Author(s):  
K.H. Westmacott
Keyword(s):  
Electron Microscopy ◽  
Past Experience ◽  
The Other ◽  
Good Case ◽  
Other Hand ◽  
The U.S

Life beyond 1MeV – like life after 40 – is not too different unless one takes advantage of past experience and is receptive to new opportunities. At first glance, the returns on performing electron microscopy at voltages greater than 1MeV diminish rather rapidly as the curves which describe the well-known advantages of HVEM often tend towards saturation. However, in a country with a significant HVEM capability, a good case can be made for investing in instruments with a range of maximum accelerating voltages. In this regard, the 1.5MeV KRATOS HVEM being installed in Berkeley will complement the other 650KeV, 1MeV, and 1.2MeV instruments currently operating in the U.S. One other consideration suggests that 1.5MeV is an optimum voltage machine – Its additional advantages may be purchased for not much more than a 1MeV instrument. On the other hand, the 3MeV HVEM's which seem to be operated at 2MeV maximum, are much more expensive.

Sign in / Sign up

Export Citation Format

Share Document