scholarly journals Water wave diffraction by a cylinder array. Part 1. Regular waves

2001 ◽  
Vol 442 ◽  
pp. 1-32 ◽  
Author(s):  
C. O. G. OHL ◽  
R. EATOCK TAYLOR ◽  
P. H. TAYLOR ◽  
A. G. L. BORTHWICK
Keyword(s):  
Free Surface ◽  
Diffraction Theory ◽  
Second Order ◽  
Surface Elevation ◽  
Circular Cylinders ◽  
Regular Waves ◽  
Wave Basin ◽  
Measured Time ◽  
Field Radiation ◽  
Offshore Wave

Diffraction of regular waves by arrays of vertical bottom-mounted circular cylinders is investigated using theoretical, computational, and experimental methods. Experiments in an offshore wave basin are designed to measure free surface elevation η at multiple locations in the vicinity of a multi-column structure subjected to regular waves of frequency 0.449 < ka < 0.524 and steepness 0.122 < kA < 0.261, where k is the wavenumber, a the cylinder radius and A the wave amplitude. Results from regular wave data analysis for first-order amplitudes are compared with those from analytical linear diffraction theory, which is shown to be accurate for predicting incident waves of low steepness. Second- and third-order terms are also estimated from the measured time series, and the effects near a second-order near-trapping frequency are compared to semi-analytical second-order diffraction theory. Linear diffraction theory is shown to be very accurate at predicting the global surface elevation features, even for waves of high steepness. However, violent events and significant nonlinear interactions, including breaking induced by wave scattering, have been observed. Furthermore, second-order near-trapping was observed to affect the magnitude of local free surface oscillations as well as scattered far-field radiation.

Effect of Second-Order and Fully Nonlinear Wave Kinematics on a Tension-Leg-Platform Wind Turbine in Extreme Wave Conditions

2017 ◽  
Author(s):  
Antonio Pegalajar-Jurado ◽  
Michael Borg ◽  
Amy Robertson ◽  
Jason Jonkman ◽  
Henrik Bredmose
Keyword(s):  
Wind Turbine ◽  
Nonlinear Wave ◽  
Second Order ◽  
Surface Elevation ◽  
Tension Leg Platform ◽  
Fully Nonlinear ◽  
Wave Kinematics ◽  
Wave Basin ◽  
Definition Of ◽  
The Impact

In this study, we assess the impact of different wave kinematics models on the dynamic response of a tension-leg-platform wind turbine. Aero-hydro-elastic simulations of the floating wind turbine are carried out employing linear, second-order, and fully nonlinear kinematics using the Morison equation for the hydrodynamic forcing. The wave kinematics are computed from either theoretical or measured signals of free-surface elevation. The numerical results from each model are compared to results from wave basin tests on a scaled prototype. The comparison shows that sub and superharmonic responses can be introduced by second-order and fully nonlinear wave kinematics. The response at the wave frequency range is better reproduced when kinematics are generated from the measured surface elevation. In the future, the numerical response may be further improved by replacing the global, constant damping coefficients in the model by a more detailed, customizable definition of the user-defined numerical damping.

Wave Run-Up Simulations With a Moving Large Volume Semi-Submersible Platform

2011 ◽  
Author(s):  
Rafael de Andrade Watai ◽  
Fabio Tadao Matsumoto ◽  
Joa˜o Vicente Sparano ◽  
Alexandre Nicolaos Simos ◽  
Marcos Donato A. S. Ferreira
Keyword(s):  
Free Surface ◽  
Large Volume ◽  
Stokes Equations ◽  
Scale Model ◽  
Uniform Grid ◽  
Small Scale ◽  
Regular Waves ◽  
Wave Basin ◽  
Free Surface Displacement ◽  
Run Up

Since July 2008, the Numerical Offshore Tank (TPN) of the University of Sa˜o Paulo and Petrobras have been working on a research project intended to improve knowledge and modeling of advanced hydrodynamics topics, such as the wave run-up phenomenon. Among other activities, wave basin tests were performed with small-scale model of a large volume semi-submersible designed to operate in Campos Basin. These tests evidenced significant run-up effects on its squared-section columns for the steepest waves in several design conditions. In order to evaluate the difficulties involved in modeling the wave run-up phenomenon, simplified tests were also carried out with the model fixed and moored in regular waves with varying steepness. Previous studies using a 2nd order BEM model and a VOF CFD code to predict free-surface elevations below the deck under regular waves were presented in Matsumoto et al. (2010). The studies illustrated considerable differences between the wave elevation results in fixed and moored model setup; however, by that time, the analysis of the moored model by a VOF CFD code was not yet complete. This paper, therefore, presents wave run-up estimations with a moving large volume semi-submersible platform performed with the CFD code ComFLOW, which solves the Navier-Stokes equations employing a local height function to the free surface displacement. The phenomenon is investigated by simulating the flow around the semi-submersible model under the influence of high steepness regular waves on a non-uniform grid. Platform motions, derived from a first order BEM code, are imposed and synchronized with the incoming wave. Aiming at avoiding numerical wave reflections, a damping zone is also applied and positioned downstream the platform model. Predicted results are compared to experimental data, measured by seven vertical wave probes located in different positions below the model deck. Although considerably time-consuming, it will be shown that simulations present very good agreement with the experimental results.

3D Stereo Imaging of Abnormal Waves in a Wave Basin

2015 ◽  
Author(s):  
Kento Mozumi ◽  
Takuji Waseda ◽  
Amin Chabchoub
Keyword(s):  
Free Surface ◽  
3D Reconstruction ◽  
Linear Transformation ◽  
Analytical Solutions ◽  
New Method ◽  
Surface Elevation ◽  
Regular Wave ◽  
Wave Surface ◽  
Wave Basin ◽  
Net Method

This paper proposes a new method to measure the wave surface elevation in a wave basin. The Direct Linear Transformation (DLT) method is employed in the 3D reconstruction of the free surface marked by an array of floats attached to a flexible net. The method is coined the Marker-Net method (MNM). Experiments were conducted in a large basin to validate the proposed method. Regular wave records are compared against wave wire measurements to quantify the accuracy of the estimation based on the MNM. To demonstrate the advantage of the MNM over conventional techniques used in the tank, a set of experiments based on analytical solutions of the 2D+T nonlinear Schrodinger equations were conducted. The MNM reconstruction of the free surface revealed propagation of an oblique structure, which is difficult to visualize otherwise.

scholarly journals Statistical properties of mechanically generated surface gravity waves: a laboratory experiment in a three-dimensional wave basin

2009 ◽  
Vol 627 ◽  
pp. 235-257 ◽  
Author(s):  
M. ONORATO ◽  
L. CAVALERI ◽  
S. FOUQUES ◽  
O. GRAMSTAD ◽  
P. A. E. M. JANSSEN ◽  
...  
Keyword(s):  
Gravity Waves ◽  
Three Dimensional ◽  
Order Theory ◽  
Second Order ◽  
Statistical Properties ◽  
Surface Elevation ◽  
Surface Gravity ◽  
Surface Gravity Waves ◽  
Wave Basin ◽  
Dimensional Wave

A wave basin experiment has been performed in the MARINTEK laboratories, in one of the largest existing three-dimensional wave tanks in the world. The aim of the experiment is to investigate the effects of directional energy distribution on the statistical properties of surface gravity waves. Different degrees of directionality have been considered, starting from long-crested waves up to directional distributions with a spread of ±30° at the spectral peak. Particular attention is given to the tails of the distribution function of the surface elevation, wave heights and wave crests. Comparison with a simplified model based on second-order theory is reported. The results show that for long-crested, steep and narrow-banded waves, the second-order theory underestimates the probability of occurrence of large waves. As directional effects are included, the departure from second-order theory becomes less accentuated and the surface elevation is characterized by weak deviations from Gaussian statistics.

Numerical Investigation of Focused Waves and Their Interaction With a Vertical Cylinder Using REEF3D

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Hans Bihs ◽  
Mayilvahanan Alagan Chella ◽  
Arun Kamath ◽  
Øivind Asgeir Arntsen
Keyword(s):  
Free Surface ◽  
Stokes Equations ◽  
Free Surface Flows ◽  
Surface Elevation ◽  
Numerical Wave Tank ◽  
Free Surface Elevation ◽  
Wave Tank ◽  
Numerical Wave ◽  
Focused Wave ◽  
The Impact

For the stability of offshore structures, such as offshore wind foundations, extreme wave conditions need to be taken into account. Waves from extreme events are critical from the design perspective. In a numerical wave tank, extreme waves can be modeled using focused waves. Here, linear waves are generated from a wave spectrum. The wave crests of the generated waves coincide at a preselected location and time. Focused wave generation is implemented in the numerical wave tank module of REEF3D, which has been extensively and successfully tested for various wave hydrodynamics and wave–structure interaction problems in particular and for free surface flows in general. The open-source computational fluid dynamics (CFD) code REEF3D solves the three-dimensional Navier–Stokes equations on a staggered Cartesian grid. Higher order numerical schemes are used for time and spatial discretization. For the interface capturing, the level set method is selected. In order to test the generated waves, the time series of the free surface elevation are compared with experimental benchmark cases. The numerically simulated free surface elevation shows good agreement with experimental data. In further computations, the impact of the focused waves on a vertical circular cylinder is investigated. A breaking focused wave is simulated and the associated kinematics is investigated. Free surface flow features during the interaction of nonbreaking focused waves with a cylinder and during the breaking process of a focused wave are also investigated along with the numerically captured free surface.

Simulation of the Gap Resonance Between Two Rectangular Barges in Regular Waves by a Free Surface Viscous Flow Solver

2013 ◽  
Author(s):  
B. Elie ◽  
G. Reliquet ◽  
P.-E. Guillerm ◽  
O. Thilleul ◽  
P. Ferrant ◽  
...  
Keyword(s):  
Experimental Data ◽  
Free Surface ◽  
Viscous Flow ◽  
Stokes Equations ◽  
Resonance Phenomenon ◽  
Navier Stokes ◽  
Regular Waves ◽  
Navier Stokes Equations ◽  
Flow Solver ◽  
Gap Resonance

This paper compares numerical and experimental results in the study of the resonance phenomenon which appears between two side-by-side fixed barges for different sea-states. Simulations were performed using SWENSE (Spectral Wave Explicit Navier-Stokes Equations) approach and results are compared with experimental data on two fixed barges with different headings and bilges. Numerical results, obtained using the SWENSE approach, are able to predict both the frequency and the magnitude of the RAO functions.

Effective Power and Speed Loss of Underwater Vehicles in Close Proximity to Regular Waves

2017 ◽  
Author(s):  
Stefan Daum ◽  
Martin Greve ◽  
Renato Skejic
Keyword(s):  
Free Surface ◽  
Deep Water ◽  
Water Waves ◽  
Underwater Vehicles ◽  
Total Resistance ◽  
Wave Load ◽  
Regular Waves ◽  
Effective Power ◽  
Close Proximity ◽  
Deep Water Waves

The present study is focused on performance issues of underwater vehicles near the free surface and gives insight into the analysis of a speed loss in regular deep water waves. Predictions of the speed loss are based on the evaluation of the total resistance and effective power in calm water and preselected regular wave fields w.r.t. the non-dimensional wave to body length ratio. It has been assumed that the water is sufficiently deep and that the vehicle is operating in a range of small to moderate Froude numbers by moving forward on a straight-line course with a defined encounter angle of incident regular waves. A modified version of the Doctors & Days [1] method as presented in Skejic and Jullumstrø [2] is used for the determination of the total resistance and consequently the effective power. In particular, the wave-making resistance is estimated by using different approaches covering simplified methods, i.e. Michell’s thin ship theory with the inclusion of viscosity effects Tuck [3] and Lazauskas [4] as well as boundary element methods, i.e. 3D Rankine source calculations according to Hess and Smith [5]. These methods are based on the linear potential fluid flow and are compared to fully viscous finite volume methods for selected geometries. The wave resistance models are verified and validated by published data of a prolate spheroid and one appropriate axisymmetric submarine model. Added resistance in regular deep water waves is obtained through evaluation of the surge mean second-order wave load. For this purpose, two different theoretical models based on potential flow theory are used: Loukakis and Sclavounos [6] and Salvesen et. al. [7]. The considered theories cover the whole range of important wavelengths for an underwater vehicle advancing in close proximity to the free surface. Comparisons between the outlined wave load theories and available theoretical and experimental data were carried out for a submerged submarine and a horizontal cylinder. Finally, the effective power and speed loss are discussed from a submarine operational point of view where the mentioned parameters directly influence mission requirements in a seaway. All presented results are carried out from the perspective of accuracy and efficiency within common engineering practice. By concluding current investigations in regular waves an outlook will be drawn to the application of advancing underwater vehicles in more realistic sea conditions.

Discussion on Venkat & Spaulding: “Numerical Simulation of Nonlinear Free-Surface Flows Generated by a Heaving Body of Arbitrary Cross Section”

1991 ◽  
Vol 35 (03) ◽  
pp. 250-253
Author(s):  
Apostolos Papanikolaou
Keyword(s):  
Free Surface ◽  
Cross Section ◽  
Euler Method ◽  
Free Surface Flows ◽  
Arbitrary Cross Section ◽  
Circular Cylinders ◽  
Published Data ◽  
The Time Domain ◽  
Heave Motion ◽  
Nonlinear Free Surface

A method has been presented recently by Venkat and Spaulding to solve the nonlinear boundary-value problem of oscillating two-dimensional cylinders of arbitrary cross section on the free surface of a fluid. The method relies on a second-order finite-difference technique with a modified Euler method for the time domain and a successive over-relaxation procedure for the spatial domain. The authors compare their numerical results with those of other authors (theoretical and experimental), as they have published data for specialized forms like a wedge, circular cylinders, and ship-like sections in forced heave motion (references [4] to [7] and [22], [23] of the paper).

Numerical Simulation of Die Swell of Second-Order Fluids Using Smoothed Particle Hydrodynamics

2010 ◽  
Author(s):  
Samir Hassan Sadek ◽  
Mehmet Yildiz
Keyword(s):  
Free Surface ◽  
Smoothed Particle Hydrodynamics ◽  
Second Order ◽  
Rheological Parameters ◽  
Die Swell ◽  
Two Dimensional ◽  
Polymeric Fluid ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Second Order Fluids

This work presents the development of both weakly compressible and incompressible Smoothed Particle Hydrodynamics (SPH) models for simulating two-dimensional transient viscoelastic free surface flow which has extensive applications in polymer processing industries. As an illustration with industrial significance, we have chosen to model the extrudate swell of a second-order polymeric fluid. The extrudate or die swell is a phenomenon that takes place during the extrusion of polymeric fluids. When a polymeric fluid is forced through a die to give a polymer its desired shape, due to its viscoelastic non-Newtonian nature, it shows a tendency to swell or contract at the die exit depending on its rheological parameters. The die swell phenomenon is a typical example of a free surface problem where the free surface is formed at the die exit after the polymeric fluid has been extruded. The swelling process leads to an undesired increase in the dimensions of the extrudate. To be able to obtain a near-net shape product, the flow in the extrusion process should be well-understood to shed some light on the important process parameters behind the swelling phenomenon. To this end, a systematic study has been carried out to compare constitutive models proposed in literature for second-order fluids in terms of their ability to capture the physics behind the swelling phenomenon. The effect of various process and rheological parameters on the die swell such as the extrusion velocity, normal stress coefficients, and Reynolds and Deborah numbers have also been investigated. The models developed here can predict both swelling and contraction of the extrudate successfully. The die swell problem was solved for a wide range of Deborah numbers and for two different Re numbers. The numerical model was validated through the solution of fully developed Newtonian and Non-Newtonian viscoelastic flows in a two-dimensional channel, and the results of these two benchmark problems were compared with analytic solutions, and good agreements were obtained.

Sign in / Sign up

Export Citation Format

Share Document