Introduction to Fluid Mechanics and Heat Transfer. By JERALD. D. PARKER, JAMES H. BOGGS and EDWARD F. BLICK. Addison-Wesley, 1969. 612 pp. 140s. Heat and Mass Transfer in Recirculating Flows. By A. D. GOSMAN, W. M. PUN, A. K. RUNCHAL, D. B. SPALDING and M. WOLFSHTEIN. Academic Press, 1969. 338 pp. 60s. or $9.50.

1970 ◽  
Vol 44 (3) ◽  
pp. 623-624 ◽  
Author(s):  
R. J. Goldstein
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Fluid Mechanics ◽  
Heat And Mass Transfer ◽  
Academic Press ◽  
Recirculating Flows

scholarly journals Impact of Binary Chemical Reaction and Activation Energy on Heat and Mass Transfer of Marangoni Driven Boundary Layer Flow of a Non-Newtonian Nanofluid

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 702
Author(s):  
Ramanahalli Jayadevamurthy Punith Gowda ◽  
Rangaswamy Naveen Kumar ◽  
Anigere Marikempaiah Jyothi ◽  
Ballajja Chandrappa Prasannakumara ◽  
Ioannis E. Sarris
Keyword(s):  
Heat Transfer ◽  
Activation Energy ◽  
Boundary Layer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Velocity Gradient ◽  
Boundary Layer Flow ◽  
Biological Fluids ◽  
Porosity Parameter ◽  
Layer Flow

The flow and heat transfer of non-Newtonian nanofluids has an extensive range of applications in oceanography, the cooling of metallic plates, melt-spinning, the movement of biological fluids, heat exchangers technology, coating and suspensions. In view of these applications, we studied the steady Marangoni driven boundary layer flow, heat and mass transfer characteristics of a nanofluid. A non-Newtonian second-grade liquid model is used to deliberate the effect of activation energy on the chemically reactive non-Newtonian nanofluid. By applying suitable similarity transformations, the system of governing equations is transformed into a set of ordinary differential equations. These reduced equations are tackled numerically using the Runge–Kutta–Fehlberg fourth-fifth order (RKF-45) method. The velocity, concentration, thermal fields and rate of heat transfer are explored for the embedded non-dimensional parameters graphically. Our results revealed that the escalating values of the Marangoni number improve the velocity gradient and reduce the heat transfer. As the values of the porosity parameter increase, the velocity gradient is reduced and the heat transfer is improved. Finally, the Nusselt number is found to decline as the porosity parameter increases.

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yao Li ◽  
Haiqing Si ◽  
Jingxuan Qiu ◽  
Yingying Shen ◽  
Peihong Zhang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Exchanger ◽  
Heat And Mass Transfer ◽  
Field Performance ◽  
High Specific Surface Area ◽  
Calculation Model ◽  
Air Separation ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency

Abstract The plate-fin heat exchanger has been widely applied in the field of air separation and aerospace due to its high specific surface area of heat transfer. However, the low heat transfer efficiency of its plate bundles has also attracted more attention. It is of great significance to optimize the structure of plate-fin heat exchanger to improve its heat transfer efficiency. The plate bundle was studied by combining numerical simulation with experiment. Firstly, according to the heat and mass transfer theory, the plate bundle calculation model of plate-fin heat exchanger was established, and the accuracy of the UDF (User-Defined Functions) for describing the mass and heat transfer was verified. Then, the influences of fin structure parameters on the heat and mass transfer characteristics of channel were discussed, including the height, spacing, thickness and length of fins. Finally the influence of various factors on the flow field performance under different flow states was integrated to complete the optimal design of the plate bundle.

An Overview: Analysis of Heat and Mass Transfer in Fractal Media by Fractal Geometry and Technique

2010 ◽  
Author(s):  
Boming Yu
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Porous Media ◽  
Heat And Mass Transfer ◽  
Oil Recovery ◽  
Fractal Geometry ◽  
Boiling Heat Transfer ◽  
Nucleate Boiling ◽  
Fractal Media ◽  
Nucleate Boiling Heat Transfer

In the past three decades, fractal geometry and technique have received considerable attention due to its wide applications in sciences and technologies such as in physics, mathematics, geophysics, oil recovery, material science and engineering, flow and heat and mass transfer in porous media etc. The fractal geometry and technique may become particularly powerful when they are applied to deal with random and disordered media such as porous media, nanofluids, nucleate boiling heat transfer. In this paper, a summary of recent advances is presented in the areas of heat and mass transfer in fractal media by fractal geometry technique. The present overview includes a brief summary of the fractal geometry technique applied in the areas of heat and mass transfer; thermal conductivities of porous media and nanofluids; nucleate boiling heat transfer. A few comments are made with respect to the theoretical studies that should be made in the future.

Heat Transfer on Nanofluid Flow With Homogeneous–Heterogeneous Reactions and Internal Heat Generation

2014 ◽  
Vol 136 (12) ◽  
Author(s):  
Raj Nandkeolyar ◽  
Peri K. Kameswaran ◽  
Sachin Shaw ◽  
Precious Sibanda
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Generation ◽  
Internal Heat ◽  
Internal Heat Generation ◽  
Heterogeneous Reactions ◽  
Transfer Coefficients ◽  
Transfer Characteristics ◽  
Fluid Properties

We investigated heat and mass transfer on water based nanofluid due to the combined effects of homogeneous–heterogeneous reactions, an external magnetic field and internal heat generation. The flow is generated by the movement of a linearly stretched surface, and the nanofluid contains nanoparticles of copper and gold. Exact solutions of the transformed model equations were obtained in terms of hypergeometric functions. To gain more insights regarding subtle impact of fluid and material parameters on the heat and mass transfer characteristics, and the fluid properties, the equations were further solved numerically using the matlab bvp4c solver. The similarities and differences in the behavior, including the heat and mass transfer characteristics, of the copper–water and gold–water nanofluids with respect to changes in the flow parameters were investigated. Finally, we obtained the numerical values of the skin friction and heat transfer coefficients.

scholarly journals Modeling of conjugated heat and mass transfer in the entrance region of falling liquid film at various values of the Froude number

2018 ◽  
Vol 194 ◽  
pp. 01007
Author(s):  
Maria V. Bartashevich
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Liquid Film ◽  
Froude Number ◽  
Heat And Mass Transfer ◽  
Water Solution ◽  
Lithium Bromide ◽  
Entrance Region ◽  
Falling Film ◽  
Falling Liquid Film

Mathematical model of conjugated heat and mass transfer in absorption on the entrance region of the semi-infinite liquid film of lithium bromide water solution is investigated for different values of Froude number. The calculations shown that larger values of Froude number corresponds to a smaller thickness of the falling film. It was demonstrated that for large values of the Froude number the heat transfer from the surface is greater than for smaller values.

The Experimental Investigation of Steam Condensation With Non-Condensable Gas Under Natural Convection

2018 ◽  
Author(s):  
Xizhen Ma ◽  
Wen Fu ◽  
Haijun Jia ◽  
Peiyue Li ◽  
Jun Li
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
High Pressure ◽  
Natural Convection ◽  
Heat And Mass Transfer ◽  
Vertical Wall ◽  
Experimental System ◽  
Steam Condensation ◽  
Transfer Coefficients ◽  
Calculation Results

The non-condensable gas is used to keep the pressure stable in the steam-gas pressurizer. The processes of heat and mass transfer during steam condensation in the presence of non-condensable gas play an important role and the thermal hydraulic characteristics in the pressurizer is particularly complicated due to the non-condensable gas. The effects of non-condensable gas on the process of heat and mass transfer during steam condensation were experimental investigated. A steam condensation experimental system under high pressure and natural convection was built and nitrogen was chosen in the experiments. The steam and nitrogen were considered in thermal equilibrium and shared the same temperature in the vessel under natural convection. In the experiments, the factors, for instance, pressure, mass fraction of nitrogen, subcooling of wall and the distribution of nitrogen in the steam, had been taken into account. The rate of heat transfer of steam condensation on the vertical wall with nitrogen was obtained and the heat transfer coefficients were also calculated. The characteristics curve of heat and mass transfer during steam condensation with non-condensable gas under high pressure were obtained and an empirical correlation was introduced to calculated to heat transfer coefficient of steam condensation with nitrogen which the calculation results showed great agreement with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document