Silicon pixel detectors for X-ray diffraction studies at synchrotron sources

1995 ◽  
Vol 28 (1) ◽  
pp. 1-32 ◽  
Author(s):  
G. Hall
Keyword(s):  
Elementary Particle ◽  
High Performance ◽  
Two Dimensional ◽  
Silicon Detectors ◽  
X Ray Diffraction ◽  
Particle Detection ◽  
X Ray ◽  
Pixel Detectors ◽  
Good Spatial Resolution ◽  
Small Elements

Customized silicon diode detectors are widely used for elementary particle detection for their good spatial resolution. Silicon detectors are also excellent X-ray detectors in the energy range of interest for applications in synchrotron radiation experiments and, with small elements laid out in a two-dimensional array, may provide high performance imaging devices for future diffraction experiments.

MicroGap Area Detector for Stress and Texture Analysis

2011 ◽  
Vol 681 ◽  
pp. 19-24
Author(s):  
Bob B. He
Keyword(s):  
Texture Analysis ◽  
High Performance ◽  
High Efficiency ◽  
X Rays ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Large Area ◽  
Ray Optics ◽  
X Ray ◽  
Area Detector

Two-dimensional x-ray diffraction is an ideal method for examining the residual stress and texture. The most dramatic development in two-dimensional x-ray diffractometry involves three critical devices, including x-ray sources, x-ray optics and detectors. The recent development in brilliant x-rays sources and high efficiency x-ray optics provided high intensity x-ray beam with the desired size and divergence. Correspondingly, the detector used in such a high performance system requires the capability to collect large two-dimensional images with high counting rate and high resolution. This paper introduces the diffraction vector approach in two-dimensional x-ray diffraction for stress and texture analysis, and an innovative large area detector based on the MikroGap™ technology.

scholarly journals Assembly of MXene/PP Separator and Its Enhancement for Ni-Rich LiNi0.8Co0.1Mn0.1O2 Electrochemical Performance

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2192
Author(s):  
Qiu-Shi Rao ◽  
Song-Yi Liao ◽  
Xing-Wen Huang ◽  
Yue-Zhu Li ◽  
Yi-Dong Liu ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
High Performance ◽  
Large Scale ◽  
Lithium Ion ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Near Future ◽  
Spraying Method

In this work, a few-layer MXene is prepared and sprinkled on a commercial polypropylene (PP) separator by a facile spraying method to enhance the electrochemistry of the Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. Scanning electron microscope (SEM) and X-ray diffraction (XRD) are used to characterize the morphology and structure of MXene. Fourier transform infrared spectroscopy (FT-IR) and a contact angle tester are used to measure the bond structure and surface wettability PP and MXene/PP separator. The effect of the MXene/PP separator on the electrochemical performance of ternary NCM811 material is tested by an electrochemical workstation. The results show that the two-dimensional MXene material could improve the wettability of the separator to the electrolyte and greatly enhance the electrochemical properties of the NCM811 cathode. During 0.5 C current density cycling, the Li/NCM811 cell with MXene/PP separator remains at 166.2 mAh/g after the 100 cycles with ~90.7% retention. The Rct of MXene/PP cell is measured to be ~28.0 Ω. Combining all analyses results related to MXene/PP separator, the strategy by spraying the MXene on commercial PP is considered as a simple, convenient, and effective way to improve the electrochemical performance of the Ni-rich NCM811 cathode and it is expected to achieve large-scale in high-performance lithium-ion batteries in the near future.

Tubulin structure at intermediate resolution

1995 ◽  
Vol 53 ◽  
pp. 852-853
Author(s):  
K. H. Downing ◽  
S. G. Wolf ◽  
E. Nogales
Keyword(s):  
High Resolution ◽  
Structural Data ◽  
Therapeutic Drug ◽  
Zinc Ions ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Negative Stain ◽  
Functional Mechanisms ◽  
Tubulin Structure

Microtubules are involved in a host of critical cell activities, many of which involve transport of organelles through the cell. Different sets of microtubules appear to form during the cell cycle for different functions. Knowledge of the structure of tubulin will be necessary in order to understand the various functional mechanisms of microtubule assemble, disassembly, and interaction with other molecules, but tubulin has so far resisted crystallization for x-ray diffraction studies. Fortuitously, in the presence of zinc ions, tubulin also forms two-dimensional, crystalline sheets that are ideally suited for study by electron microscopy. We have refined procedures for forming the sheets and preparing them for EM, and have been able to obtain high-resolution structural data that sheds light on the formation and stabilization of microtubules, and even the interaction with a therapeutic drug.Tubulin sheets had been extensively studied in negative stain, demonstrating that the same protofilament structure was formed in the sheets and microtubules. For high resolution studies, we have found that the sheets embedded in either glucose or tannin diffract to around 3 Å.

Synthesis and Structure of a Clathrated Two-Dimensional Metal-Organic Framework: [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2·H2O (L = Bis(1-pyrazinylethylidene)hydrazine)

2008 ◽  
Vol 73 (1) ◽  
pp. 24-31
Author(s):  
Dayu Wu ◽  
Genhua Wu ◽  
Wei Huang ◽  
Zhuqing Wang
Keyword(s):  
Metal Organic Framework ◽  
Channel Structure ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
X Ray ◽  
Square Planar ◽  
Metal Organic ◽  
Aqueous Meoh ◽  
Organic Framework

The compound [Cd(4,4'-bpy)2(H2O)2](ClO4)2·(L)2 was obtained by the reaction of Cd(ClO4)2, bis(1-pyrazinylethylidene)hydrazine (L) and 4,4'-bipyridine in aqueous MeOH. Single-crystal X-ray diffraction has revealed its two-dimensional metal-organic framework. The 2-D layers superpose on each other, giving a channel structure. The square planar grids consist of two pairs of shared edges with Cd(II) ion and a 4,4'-bipyridine molecule each vertex and side, respectively. The square cavity has a dimension of 11.817 × 11.781 Å. Two guest molecules of bis(1-pyrazinylethylidene)hydrazine are clathrated in every hydrophobic host cavity, being further stabilized by π-π stacking and hydrogen bonding. The results suggest that the hydrazine molecules present in the network serve as structure-directing templates in the formation of crystal structures.

scholarly journals Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1085
Author(s):  
Patricia Castaño-Rivera ◽  
Isabel Calle-Holguín ◽  
Johanna Castaño ◽  
Gustavo Cabrera-Barjas ◽  
Karen Galvez-Garrido ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
High Performance ◽  
Rubber Matrix ◽  
Butadiene Rubber ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rubber Blends ◽  
Ft Ir ◽  
Chloroprene Rubber

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Two-dimensional lanthanide(III) coordination polymers: solvothermal synthesis, crystal structure, and stability

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Runmei Ding ◽  
Zixin He ◽  
Meilin Wang ◽  
Danian Tian ◽  
Peipei Cen
Keyword(s):  
Crystal Structure ◽  
Coordination Polymers ◽  
Solvothermal Synthesis ◽  
Analysis Data ◽  
Water Stability ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Solvothermal Conditions

AbstractBased on 2-(4-pyridyl)-terephthalate (H2pta) and oxalate ligands, two new lanthanide-containing coordination polymers (CPs), [Tb(pta)(C2O4)0.5(H2O)2)]·2H2O (1) and [Sm(pta)(C2O4)0.5(H2O)2)]·2H2O (2), have been synthesized under solvothermal conditions. The structures of both 1 and 2 have been determined by single-crystal X-ray diffraction. Infrared, elemental analysis, powder X-ray diffraction and thermogravimetric analysis data are also presented. The crystals of 1 and 2 exhibit isostructural layer-like networks, crystallizing in the triclinic space group P$‾{1}$. The layers are further stabilized and associated into 3D architectures through hydrogen bonding. Remarkably, the CPs 1 and 2 exhibit excellent water stability and remarkable thermostability with thermal decomposition temperatures of more than 420 °C.

scholarly journals c-Perpendicular Orientation of Poly(ʟ-lactide) Films

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1572
Author(s):  
Baku Nagendra ◽  
Paola Rizzo ◽  
Christophe Daniel ◽  
Lucia Baldino ◽  
Gaetano Guerra
Keyword(s):  
Low Temperature ◽  
Film Plane ◽  
Wide Angle ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Amorphous Films ◽  
High Transparency ◽  
X Ray ◽  
Crystalline Forms ◽  
Induced Crystallization

Poly(ʟ-lactide) (PLLA) films, even of high thickness, exhibiting co-crystalline and crystalline α phases with their chain axes preferentially perpendicular to the film plane (c⊥ orientation) have been obtained. This c⊥ orientation, unprecedented for PLLA films, can be achieved by the crystallization of amorphous films as induced by low-temperature sorption of molecules being suitable as guests of PLLA co-crystalline forms, such as N,N-dimethylformamide, cyclopentanone or 1,3-dioxolane. This kind of orientation is shown and quantified by two-dimensional wide-angle X-ray diffraction (2D-WAXD) patterns, as taken with the X-ray beam parallel to the film plane (EDGE patterns), which present all the hk0 arcs centered on the meridian. PLLA α-form films, as obtained by low-temperature guest-induced crystallization, also exhibit high transparency, being not far from those of the starting amorphous films.

Effect of Yttria-Stabilized Zirconia Concentration in an Electroless Bath on Microstructure and Composition of Ni/Yttria-Stabilized Zirconia Nanocomposite

2021 ◽  
Vol 21 (11) ◽  
pp. 5592-5602
Author(s):  
Samira Almasi ◽  
Ali Mohammad Rashidi
Keyword(s):  
High Performance ◽  
Yttria Stabilized Zirconia ◽  
X Ray Diffraction ◽  
Stabilized Zirconia ◽  
Nickel Ion ◽  
Nanocomposite Particles ◽  
X Ray ◽  
Ni Content ◽  
Naoh Solution ◽  
Average Size

The effect of the yttria-stabilized zirconia (YSZ) nanoparticle loading in an electro-less bath was considered as one of the vital synthesis variables for control Ni content and microstructure of prepared nanocomposite particles, which are two crucial factors to achieving high-performance SOFC anode. Nanocomposite particles were prepared using a simple electroless method without any expensive pretreatment of sensitizing by Sn2+ ions as well as activating by Pd2+ ions that are usually used to apply nickel coating on the surface of a non-conductive substrate. The process was performed by adding YSZ nanoparticles into NaOH solution, separating them from the solution by the centrifugal method, then providing several water-based nanofluids with different concentrations of activated YSZ nanoparticles, mixing them with NiCI2 solution, followed by adding the hydrazine and then NaOH solution. X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray analysis were used to analyze the prepared nanocomposite particles. It is observed that after adding YSZ nanoparticles into the NaOH solution, the pH of the solution varied gradually from a starting pH of 10.2 to 9. Also, by increasing the YSZ nanoparticles loading in the electroless bath from 76 mg/l to 126 mg/l, the grain size of Ni deposits, the Ni content and the average size of the prepared nanocomposite particles decreased. The electrochemical mechanism previously proposed for the nickel ion reduction was modified, and a novel analytical model was proposed for variation of the efficiency of Ni deposition with YSZ nanoparticles loading.

Sign in / Sign up

Export Citation Format

Share Document