A novel five-degrees-of-freedom decoupled robot

Robotica ◽  
2009 ◽  
Vol 28 (6) ◽  
pp. 909-917 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Horacio Orozco-Mendoza ◽  
José M. Rico-Martínez
Keyword(s):  
Machine Tools ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Solar Panels ◽  
Spatial Mechanism ◽  
Moving Platforms ◽  
Parallel Kinematic ◽  
Radar Antennas

SUMMARYIn this work a new nonoverconstrained redundant decoupled robot, free of compound joints, formed from three parallel manipulators, with two moving platforms and provided with six active limbs connected to the fixed platform, called LinceJJP, is presented. Interesting applications such as multi-axis machine tools with parallel kinematic architectures, solar panels, radar antennas, and telescopes are available for this novel spatial mechanism.

A Novel Parallel Mechanism With 3-RRUR Legs

2007 ◽  
Author(s):  
Yanwen Li ◽  
Yueyue Zhang ◽  
Lumin Wang ◽  
Zhen Huang
Keyword(s):  
Machine Tools ◽  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Symmetrical Structure ◽  
Forward Kinematic ◽  
Accumulated Error

This paper investigates a novel 4-DOF 3-RRUR parallel manipulator, the number and the characteristics of its degrees of freedom are determined firstly, the rational input plan and the invert and forward kinematic solutions are carried out then. The corresponding numeral example of the forward kinematics is given. This type of parallel manipulators has a symmetrical structure, less accumulated error, and can be used to construct virtual-axis machine tools. The analysis in this paper will play an important role in promoting the application of such manipulators.

A novel class of generalized parallel manipulators with high rotational capability

2020 ◽  
Vol 234 (23) ◽  
pp. 4599-4619
Author(s):  
Chunxu Tian ◽  
Dan Zhang ◽  
Jian Liu
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Structural Characteristics ◽  
Synthesis Method ◽  
Parallel Manipulators ◽  
Rigid Bodies ◽  
Kinematic Chains ◽  
Moving Platforms ◽  
Moving Platform ◽  
Limb Structure

A conventional parallel manipulator is characterized by connecting one moving platform with two or more serial kinematic limbs. Since each limb is independently supporting one moving platform, the moving platform must be a rigid body with several kinematic pairs fixed on it. However, for generalized parallel manipulators with articulated moving platforms, the moving platforms are not limited to rigid bodies but including serial kinematic chains or internal kinematic joints. The introduction of articulated moving platforms allows for improving the kinematic performance of generalized parallel manipulators, especially for rotational capability. On account of the structural characteristics of the moving platforms, it also poses a significant challenge in the construction of the structures of manipulators. This research raises a new method for the type synthesis of generalized parallel manipulators with novel articulated moving platforms. The proposed method introduces a striking shortcut for the limb structure analysis of mechanisms with high rotational capability. In this paper, a class of generalized parallel manipulator with different degrees of freedom from 3 to 6 are constructed by using the constraint synthesis method, and several examples are provided to demonstrate the feasibility of the advocated method. At last, the 3T3R generalized parallel manipulator is taken as an example to analyze the inverse kinematics, and the evaluation of the workspace is conducted to verify the rotational capacity.

Enumeration and instantaneous mobility analysis of a class of 3-UPU parallel manipulators with equilateral triangular platforms

Robotica ◽  
2021 ◽  
pp. 1-32
Author(s):  
Sercan Boztaş ◽  
Gökhan Kiper
Keyword(s):  
Software Package ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Mobility Analysis ◽  
Specific Design ◽  
Design Task ◽  
Moving Platforms ◽  
Joint Axis ◽  
Motion Characteristics

Abstract In this study, several joint axis orientations on equilateral platforms and the limbs of 3-UPU parallel manipulators (PMs) are examined. The generated joint layouts for the platforms were matched with each other to generate and enumerate manipulator architectures based on certain assumptions. The structures of thus obtained manipulators are examined and limb types were determined. These limb types were analyzed using screw theory. The instantaneous mobility of the manipulators and the motion characteristics of the moving platforms are tabulated. The finite mobility analysis of one of the manipulators is performed using a software package as an example. Among several different 3-UPU PM architectures, 118 novel 3-UPU PMs with non-parasitic 3-degrees-of-freedom are significantly important. The classified 3-UPU PMs with determined motion characteristics can be used by researchers as a design alternative for their specific design task.

scholarly journals Technology-Oriented Optimization of the Secondary Design Parameters of Robots for High-Speed Machining Applications

2010 ◽  
Author(s):  
Se´bastien Briot ◽  
Anatol Pashkevich ◽  
Damien Chablat
Keyword(s):  
Machine Tools ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Parallel Robots ◽  
Design Parameters ◽  
Speed Up ◽  
Parallel Kinematic ◽  
Parallel Kinematic Machine Tools ◽  
Accuracy Constraints ◽  
Three Degrees Of Freedom

In this paper, a new methodology for the optimal design of the secondary geometric parameters (shape of links, size of the platform, etc.) of parallel kinematic machine tools is proposed. This approach aims at minimizing the total mass of the robot under position accuracy constraints. This methodology is applied to two translational parallel robots with three degrees-of-freedom (DOF): the Y-STAR and the UraneSX. The proposed approach is able to speed up the design process and to help the designer to find more quickly a set of design parameters.

Precision Mechanisms Based on Parallel Kinematics

2010 ◽  
Vol 4 (4) ◽  
pp. 326-337 ◽  
Author(s):  
Takaaki Oiwa ◽  
Keyword(s):  
Machine Tools ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Parallel Kinematics ◽  
Multiple Degrees Of Freedom ◽  
Parallel Kinematic Mechanism ◽  
Parallel Kinematic ◽  
Three Dimensional Coordinate ◽  
Kinematic Mechanism

The parallel kinematic mechanism has been applied to simulators and robots for its high speed or multiple degrees of freedom. In recent years, however, it has begun to be used for precision mechanisms, such as machine tools, measuring machines, or fine-motion mechanisms. This review outlines the parallel kinematic mechanism and compares it with the conventional orthogonal coordinate mechanism to describe its nature and characteristics as a precision mechanism. It also introduces some cases in which the parallel kinematic mechanism is applied to fine motion mechanisms and three-dimensional coordinate measuring machines in addition to machine tools and robots. Finally, it discusses the problems and future of this parallel kinematic mechanism.

A Method to Evaluate and Calculate the Mobility of a General Compliant Parallel Manipulator

2004 ◽  
Author(s):  
Jingjun Yu ◽  
Shusheng Bi ◽  
Guanghua Zong
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Compliant Mechanism ◽  
Parallel Manipulators ◽  
Kinematic Characteristic ◽  
Parallel Kinematic Machine ◽  
Compliance Matrix ◽  
Multiple Degrees Of Freedom ◽  
Parallel Kinematic

A compliant parallel manipulator (CPM), is a kind of compliant mechanism characterizes a complicate topological structure and multiple degrees of freedom. As one of the kinematic characteristics of a CPM, the mobility of a CPM become complicate compared to its rigid-counterpart. In order to describe such a complicate kinematic characteristic of a CPM, “primary mobility of a compliant parallel manipulator” concept is proposed. By means of the screw theory, a method of quantifying the primary mobility of the CPM is investigated under the ground that the compliance matrix of the manipulator should be calculated primarily. By using this method, the primary mobility of two typical compliant parallel manipulators, one is a planar 3-RRR CPM and the other a spatial 3-RRPR CPM, is addressed respectively. This proposed method is also instructive for analyzing the instantaneous mobility of a general degenerate-DOF parallel manipulator or a Parallel Kinematic Machine (PKM).

Novel 2R3T and 2R2T parallel mechanisms with high rotational capability

Robotica ◽  
2015 ◽  
Vol 35 (2) ◽  
pp. 401-418 ◽  
Author(s):  
Congzhe Wang ◽  
Yuefa Fang ◽  
Hairong Fang
Keyword(s):  
Machine Tools ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Structural Synthesis ◽  
Lie Group Theory ◽  
Moving Platforms ◽  
Velocity Relationship ◽  
Parallel Machine Tools ◽  
Relationship Of

SUMMARYLarge rotational angles about two axes for parallel mechanisms (PMs) with two rotational and three translational (2R3T) degrees of freedom (DOFs) or two rotational and two translational (2R2T) DOFs are demanded in some industries, such as parallel machine tools and multi-axis 3D printing. To address the problem, this paper focuses on the structural synthesis of new 2R3T and 2R2T PMs with high rotational capability. First, two new moving platforms are proposed based on the concepts of decoupled and configurable design. By means of the proposed platforms and Lie group theory, a series of 2R2T and 2R3T PMs are synthesized. Then the inverse kinematics and velocity relationship of one of the synthesized 2R3T PMs are presented. Finally, the rotational capability of the same 2R3T PM is analyzed. The result shows that by means of actuation redundancy, the studied 2R3T PM indeed possesses the high rotational capability about two axes, even though interferences and singularities are taken into consideration.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

An XYZ Parallel Kinematic Flexure Mechanism With Geometrically Decoupled Degrees of Freedom

2011 ◽  
Author(s):  
Shorya Awtar ◽  
John Ustick ◽  
Shiladitya Sen
Keyword(s):  
Degrees Of Freedom ◽  
Element Analysis ◽  
Motion Direction ◽  
Form Analysis ◽  
Flexure Mechanism ◽  
Non Linear ◽  
Decoupled Motion ◽  
Motion Range ◽  
Parallel Kinematic ◽  
Cross Axis

We present the constraint-based design of a novel parallel kinematic flexure mechanism that provides highly decoupled motions along the three translational directions (X, Y, and Z) and high stiffness along the three rotational directions (θx, θy, and θz). The geometric decoupling ensures large motion range along each translational direction and enables integration with large-stroke ground-mounted linear actuators or generators, depending on the application. The proposed design, which is based on a systematic arrangement of multiple rigid stages and parallelogram flexure modules, is analyzed via non-linear finite element analysis. A proof-of-concept prototype of the flexure mechanism is fabricated to validate its large range and decoupled motion capability. The analyses as well as the hardware demonstrate an XYZ motion range of 10 mm × 10 mm × 10 mm. Over this motion range, the non-linear FEA predicts a cross-axis error of less than 3%, parasitic rotations less than 2 mrad, less than 4% lost motion, actuator isolation less than 1.5%, and no perceptible motion direction stiffness variation. Ongoing work includes non-linear closed-form analysis and experimental measurement of these error motion and stiffness characteristics.

An XYZ Parallel-Kinematic Flexure Mechanism With Geometrically Decoupled Degrees of Freedom

2012 ◽  
Vol 5 (1) ◽  
Author(s):  
Shorya Awtar ◽  
John Ustick ◽  
Shiladitya Sen
Keyword(s):  
Degrees Of Freedom ◽  
Finite Elements Analysis ◽  
Motion Direction ◽  
Flexure Mechanism ◽  
Nonlinear Finite Elements ◽  
Decoupled Motion ◽  
Motion Range ◽  
Stiffness Variation ◽  
Parallel Kinematic ◽  
Cross Axis

A novel parallel-kinematic flexure mechanism that provides highly decoupled motions along the three translational directions (X, Y, and Z) and high stiffness along the three rotational directions (θx, θy, and θz) is presented. Geometric decoupling ensures large motion range along each translational direction and enables integration with large-stroke ground-mounted linear actuators or generators, depending on the application. The proposed design, which is based on a systematic arrangement of multiple rigid stages and parallelogram flexure modules, is analyzed via nonlinear finite elements analysis (FEA). A proof-of-concept prototype is fabricated to validate the predicted large range and decoupled motion capabilities. The analysis and the hardware prototype demonstrate an XYZ motion range of 10 mm × 10 mm × 10 mm. Over this motion range, the nonlinear FEA predicts cross-axis errors of less than 7.8%, parasitic rotations less than 10.8 mrad, less than 14.4% lost motion, actuator isolation better than 1.5%, and no perceptible motion direction stiffness variation.

Sign in / Sign up

Export Citation Format

Share Document