Energy-dispersive x-ray detectors for analytical electron microscopy

1991 ◽  
Vol 49 ◽  
pp. 986-987
Author(s):  
L. E. Thomas
Keyword(s):  
Collection Efficiency ◽  
Analytical Electron Microscopy ◽  
Energy Dispersive ◽  
Detector Performance ◽  
X Ray ◽  
Performance Improvements ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Scanning Transmission ◽  
Electron Microscopes

Continuing evolution of energy-dispersive x-ray spectrometer (EDS) systems has greatly advanced x-ray detector performance in analytical electron microscopes. The latest detectors offer improved energy resolution, count rate performance, geometrical collection efficiency, durability, and efficiency for light and heavy elements. Innovative detector designs for transmission and scanning transmission electron microscopes (TEM/STEMs) include such features as liquid-nitrogen-free operation, in situ de-icing of the detector crystal, user cleanable windows, demountable windows, ultrahigh vacuum compatibility (including adaptations to allow microscope bakeouts without removing the detector), beam damage protection, and microscope interfaces with optimized collection geometries. Divergent design philosophies have produced a variety of systems with specialized features, and users may face hard choices in selecting the best detector for the job. The aim of this paper is to review the current state of EDS detector development and the importance of the performance improvements to TEM/STEM users.

X-ray Energy-Dispersive Spectrometry During In Situ Liquid Cell Studies Using an Analytical Electron Microscope

2014 ◽  
Vol 20 (2) ◽  
pp. 323-329 ◽  
Author(s):  
Nestor J. Zaluzec ◽  
M. Grace Burke ◽  
Sarah J. Haigh ◽  
Matthew A. Kulzick
Keyword(s):  
Electron Microscope ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Energy Dispersive ◽  
X Ray ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Scanning Transmission ◽  
Liquid Cell

AbstractThe use of analytical spectroscopies during scanning/transmission electron microscope (S/TEM) investigations of micro- and nano-scale structures has become a routine technique in the arsenal of tools available to today’s materials researchers. Essential to implementation and successful application of spectroscopy to characterization is the integration of numerous technologies, which include electron optics, specimen holders, and associated detectors. While this combination has been achieved in many instrument configurations, the integration of X-ray energy-dispersive spectroscopy and in situ liquid environmental cells in the S/TEM has to date been elusive. In this work we present the successful incorporation/modifications to a system that achieves this functionality for analytical electron microscopy.

Quantitative Assessment and Measurement of X-ray Detector Performance and Solid Angle in the Analytical Electron Microscope

2021 ◽  
pp. 1-13
Author(s):  
Nestor J. Zaluzec
Keyword(s):  
Solid Angle ◽  
Collection Efficiency ◽  
Analytical Formula ◽  
Individual Performance ◽  
Detector Performance ◽  
X Ray ◽  
Wide Range ◽  
Analytical Electron ◽  
Scanning Transmission ◽  
Electron Microscopes

A wide range of X-ray detectors and geometries are available today on transmission/scanning transmission analytical electron microscopes. While there have been numerous reports of their individual performance, no single experimentally reproducible metric has been proposed as a basis of comparison between the systems. In this paper, we detail modeling, experimental procedures, measurements, and specimens which can be used to provide a manufacturer-independent assessment of the performance of an analytical system. Using these protocols, the geometrical collection efficiency, system peaks, and minimum detection limits can be independently assessed and can be used to determine the best conditions to conduct modern hyperspectral and/or spectrally resolved tomographic analyses for an individual instrument. A simple analytical formula and specimen is presented which after suitable system calibrations can be used to experimentally determine the X-ray detector solid angle.

The effect of small additions of Cu on precipitation in Al-Mg-Si alloys

1990 ◽  
Vol 48 (2) ◽  
pp. 442-443
Author(s):  
M. Tamizifar ◽  
G. Cliff ◽  
R.W. Devenish ◽  
G.W. Lorimer
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Argon Atmosphere ◽  
Age Hardening ◽  
X Ray ◽  
Transmission Electron ◽  
Heat Treated ◽  
Analytical Electron ◽  
Scanning Transmission

Small additions of copper, <1 wt%, have a pronounced effect on the ageing response of Al-Mg-Si alloys. The object of the present investigation was to study the effect of additions of copper up to 0.5 wt% on the ageing response of a series of Al-Mg-Si alloys and to use high resolution analytical electron microscopy to determine the composition of the age hardening precipitates.The composition of the alloys investigated is given in Table 1. The alloys were heat treated in an argon atmosphere for 30m, water quenched and immediately aged either at 180°C for 15 h or given a duplex treatment of 180°C for 15 h followed by 350°C for 2 h2. The double-ageing treatment was similar to that carried out by Dumolt et al. Analyses of the precipitation were carried out with a HB 501 Scanning Transmission Electron Microscope. X-ray peak integrals were converted into weight fractions using the ratio technique of Cliff and Lorimer.

scholarly journals New capabilities for `colouring in' the chemistry of crystal defects atom-by-atom

2014 ◽  
Vol 70 (6) ◽  
pp. 521-523
Author(s):  
Sarah J. Haigh
Keyword(s):  
High Resolution ◽  
High Efficiency ◽  
Crystal Defects ◽  
Energy Dispersive ◽  
Acta Cryst ◽  
X Ray ◽  
Elemental Imaging ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Electron Microscopes

The latest generation of scanning transmission electron microscopes equipped with high-efficiency energy-dispersive X-ray detectors are breaking new ground with respect to high-resolution elemental imaging of materials. In this issue, Paulauskaset al.[Acta Cryst.(2014), A70, 524–531] demonstrate impressive results when applying this technique to improve understanding of CdTe dislocation structures.

scholarly journals Materials science applications of a 120kV FEG TEM/STEM: Triskaidekaphilia

1991 ◽  
Vol 49 ◽  
pp. 698-699
Author(s):  
J. Bentley ◽  
A. T. Fisher ◽  
E. A. Kenik ◽  
Z. L. Wang
Keyword(s):  
Electron Microscope ◽  
Materials Science ◽  
X Ray ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Scanning Transmission ◽  
Potential Impact ◽  
Electron Microscopes ◽  
Electron Energy Loss

The introduction by several manufacturers of 200kV transmission electron microscopes (TEM) equipped with field emission guns affords the opportunity to assess their potential impact on materials science by examining applications of similar 100-120kV instruments that have been in use for more than a decade. This summary is based on results from a Philips EM400T/FEG configured as an analytical electron microscope (AEM) with a 6585 scanning transmission (STEM) unit, ED AX 9100/70 or 9900 energy dispersive X-ray spectroscopy (EDS) systems, and Gatan 607 serial- or 666 parallel-detection electron energy-loss spectrometers (EELS). Examples in four areas that illustrate applications that are impossible or so difficult as to be impracticable with conventional thermionic electron guns are described below.

Mixed-layer mica-chlorite in very low-grade metaclastites from the Malàguide Complex (Betic Cordilleras, Spain)

Clay Minerals ◽  
2001 ◽  
Vol 36 (3) ◽  
pp. 307-324 ◽  
Author(s):  
M. D. Ruiz Cruz
Keyword(s):  
Electron Microscopy ◽  
Mixed Layer ◽  
Analytical Electron Microscopy ◽  
Low Grade ◽  
X Ray ◽  
Betic Cordilleras ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Microscopy Data ◽  
Ray Patterns

AbstractMixed-layered phyllosilicates with composition intermediate between mica and chlorite were identified in very low-grade metaclastites from the Malàguide Complex (Betic Cordilleras, Spain), and studied by X-ray diffraction, and transmission and analytical electron microscopy. They occur both as small grains in the rock matrix, and associated with muscovitechlorite stacks. Transmission electron microscope observations revealed a transition from chlorite to ordered 1:1 interstratifications through complex 1:2 and 1:3 interstratifications. Analytical electron microscopy data indicate a composition slightly different from the sum of discrete trioctahedral chlorite and dioctahedral mica. The types of layer transitions suggest that mixed-layer formation included two main processes: (1) the replacement of a brucite sheet by a cation sheet in the chlorite structure; and (2) the precipitation of mica-like layers between the chlorite layers. The strongest diffraction lines in oriented X-ray patterns are: 12.60 Å (002), 7.98 Å (003), 4.82 Å (005) and 3.48 Å (007).

Sign in / Sign up

Export Citation Format

Share Document