Study on erythrocytes by SEM photogrammetry (SEMP) technique

1990 ◽  
Vol 48 (3) ◽  
pp. 724-725
Author(s):  
Tong Wensheng ◽  
Lu Lianhuang ◽  
Zhang Zhijun
Keyword(s):  
Quantitative Analysis ◽  
Cell Membrane ◽  
Clinical Diagnosis ◽  
Human Body ◽  
Blood Cells ◽  
Three Dimensional ◽  
Normal Person ◽  
Blood Disease ◽  
Computation Technique ◽  
Important Basis

This is a combined study of two diffirent branches, photogrammetry and morphology of blood cells. The three dimensional quantitative analysis of erythrocytes using SEMP technique, electron computation technique and photogrammetry theory has made it possible to push the study of mophology of blood cells from LM, TEM, SEM to a higher stage, that of SEM P. A new path has been broken for deeply study of morphology of blood cells.In medical view, the abnormality of the quality and quantity of erythrocytes is one of the important changes of blood disease. It shows the abnormal blood—making function of the human body. Therefore, the study of the change of shape on erythrocytes is the indispensable and important basis of reference in the clinical diagnosis and research of blood disease.The erythrocytes of one normal person, three PNH Patients and one AA patient were used in this experiment. This research determines the following items: Height;Length of two axes (long and short), ratio; Crevice in depth and width of cell membrane; Circumference of erythrocytes; Isoline map of erythrocytes; Section map of erythrocytes.

scholarly journals Emergent cell-free layer asymmetry and biased haematocrit partition in a biomimetic vascular network of successive bifurcations

Soft Matter ◽  
2021 ◽  
Author(s):  
Qi Zhou ◽  
Joana Fidalgo ◽  
Miguel Bernabeu ◽  
Mónica S.N. Oliveira ◽  
Timm Krüger
Keyword(s):  
Red Blood Cells ◽  
Human Body ◽  
Blood Cells ◽  
Soft Matter ◽  
Vascular Network ◽  
Free Layer ◽  
Cell Free Layer

Blood is a vital soft matter, and its normal circulation in the human body relies on the distribution of red blood cells (RBCs) at successive bifurcations. Understanding how RBCs are...

Simulation Analysis of Pneumatic on-off Pressure Mechanism on Printing Press

2010 ◽  
Vol 154-155 ◽  
pp. 1481-1484 ◽  
Author(s):  
Jun Zhong Guo ◽  
Jun Ping Yang
Keyword(s):  
Kinematic Analysis ◽  
Simulation Analysis ◽  
Angular Displacement ◽  
Three Dimensional ◽  
Printing Press ◽  
Work Demand ◽  
Analysis Process ◽  
Adams Software ◽  
Important Basis

The on-off pressure mechanism has an important function to the printing press, the quality of which concerns the working performance of the printing machine and the quality of printed products directly. In this paper, the pneumatic on-off pressure mechanism is discussed; the work demand of order on-off pressure is analyzed. In addition, the three-dimensional digital model and the kinematic analysis process can be achieved on the basis of ADAMS software. What’s more, the on pressure value in the process of on pressure is derived from the kinematic analysis. Lastly, the relation between the motion of on-off pressure mechanism and cylinder’s angular displacement is analyzed, an important basis to the on-off pressure mechanism’s optimal design will be provided.

Sight distance red zones on combined horizontal and sag vertical curves

1998 ◽  
Vol 25 (4) ◽  
pp. 621-630 ◽  
Author(s):  
Yasser Hassan ◽  
Said M Easa
Keyword(s):  
Quantitative Analysis ◽  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Horizontal Curve ◽  
Sight Distance ◽  
Stopping Sight Distance ◽  
Three Dimensional Models ◽  
Highway Alignment ◽  
Current Standards

Coordination of highway horizontal and vertical alignments is based on subjective guidelines in current standards. This paper presents a quantitative analysis of coordinating horizontal and sag vertical curves that are designed using two-dimensional standards. The locations where a horizontal curve should not be positioned relative to a sag vertical curve (called red zones) are identified. In the red zone, the available sight distance (computed using three-dimensional models) is less than the required sight distance. Two types of red zones, based on stopping sight distance (SSD) and preview sight distance (PVSD), are examined. The SSD red zone corresponds to the locations where an overlap between a horizontal curve and a sag vertical curve should be avoided because the three-dimensional sight distance will be less than the required SSD. The PVSD red zone corresponds to the locations where a horizontal curve should not start because drivers will not be able to perceive it and safely react to it. The SSD red zones exist for practical highway alignment parameters, and therefore designers should check the alignments for potential SSD red zones. The range of SSD red zones was found to depend on the different alignment parameters, especially the superelevation rate. On the other hand, the results showed that the PVSD red zones exist only for large values of the required PVSD, and therefore this type of red zones is not critical. This paper should be of particular interest to the highway designers and professionals concerned with highway safety.Key words: sight distance, red zone, combined alignment.

Sign in / Sign up

Export Citation Format

Share Document