Chemical Analysis by X-Ray Diffraction: Classification and Use of X-Ray Diffraction Patterns

1986 ◽  
Vol 1 (2) ◽  
pp. 2-14 ◽  
Author(s):  
J. D. Hanawalt ◽  
H. W. Rinn ◽  
L. K. Frevel
Keyword(s):  
Chemical Analysis ◽  
Polycrystalline Material ◽  
Financial Assistance ◽  
Original Publication ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Company ◽  
Diffraction Patterns ◽  
Analytical Laboratories

Editor's Note: As part of our plan to reprint previously published papers of great historical interest, the editorial board is pleased to reproduce the following paper by Hanawalt, Frevel and Rinn. This paper was originally published in Volume 10 (1938) of the Analytical Ediction of “Industrial and Engineering Chemistry” and is considered by most diffractionists to be the classic work in qualitative identification of multiphase polycrystalline material. The original publication carried a foreword written by the editor of Industrial and Engineering Chemistry. This foreword ended with this prophetic statement:“There is reason to believe that this publication, which is made possible in this form by the generous financial assistance of the Dow Chemical Company, will serve to bring this method of analysis into general use in industrial and consulting analytical laboratories.”

Identification of Crystalline Materials: Classification and Use of X-Ray Diffraction Patterns

1986 ◽  
Vol 1 (1) ◽  
pp. 2-6 ◽  
Author(s):  
J. D. Hanawalt ◽  
H. W. Rinn
Keyword(s):  
Theoretical Basis ◽  
X Rays ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Chemical Company ◽  
The Past ◽  
Different Types ◽  
Diffraction Patterns ◽  
Or Applications

In the course of the past few years, X-ray and spectroscopic methods of analysis have found an increasing usefulness at the Dow Chemical Company. There are a large number of different types of problems on which information can be obtained by the variations of apparatus and technic which are possible in these two fields. It is not the purpose of this paper, however, to discuss these methods or applications in general, but to describe in some detail a scheme of classifying and using X-ray diffraction patterns which has been found very helpful in one particular application of X-rays — namely, that of identifying unknown substances by means of their Hull powder diffraction patterns.The inherent power of X-ray diffraction as a practical means of chemical analysis was pointed out a good many years ago. Having a different theoretical basis and depending upon an entirely different technic than other methods, it would be expected to supplement the information to be obtained from other methods and, at times, to be applicable where other methods are not suitable. It appears, however, that the use of this method has not increased at a rate commensurate with its unique and valuable features, and that it is used by relatively few academic and industrial laboratories.

Low-Temperature X-Ray Diffraction of Frozen Electrolytes

1961 ◽  
Vol 5 ◽  
pp. 48-56 ◽  
Author(s):  
H.J. Weltman
Keyword(s):  
Low Temperature ◽  
Room Temperature ◽  
Structural Changes ◽  
Polycrystalline Material ◽  
Sample Introduction ◽  
X Ray Diffraction ◽  
Strip Chart Recorder ◽  
X Ray ◽  
Chart Recorder ◽  
Diffraction Patterns

AbstractA low-temperature X-ray diffraction apparatus has been constructed to study structure and structural changes of electrolytes in the frozen state. This apparatus, which is inexpensive and easy to construct, is an attachment to a standard wide-angle diffractometer. Diffraction patterns may be obtained of various types of materials at any temperature from room temperature to −196°C with a control of ±1°C. The diffraction patterns are recorded on a strip-chart recorder as they are being obtained. Thus, this diffractometer method has several advantages over the camera methods usually employed for low-temperature X-ray diffraction work. A unique sample-introduction method is described which ensures a polycrystalline material suitable for obtaining diffraction patterns. Such patterns are shown for various concentrations of salts in water at several low temperatures, phase transformations being in evidence.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

Examination of Rabbit Fc Crystals

1968 ◽  
Vol 26 ◽  
pp. 140-141
Author(s):  
J. P. Robinson ◽  
P. G. Lenhert
Keyword(s):  
Molecular Weight ◽  
Flat Plate ◽  
Phosphate Buffer ◽  
Asymmetric Unit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Neutral Ph ◽  
Small Crystals ◽  
Carbon Coated ◽  
Diffraction Patterns

Crystallographic studies of rabbit Fc using X-ray diffraction patterns were recently reported. The unit cell constants were reported to be a = 69. 2 A°, b = 73. 1 A°, c = 60. 6 A°, B = 104° 30', space group P21, monoclinic, volume of asymmetric unit V = 148, 000 A°3. The molecular weight of the fragment was determined to be 55, 000 ± 2000 which is in agreement with earlier determinations by other methods.Fc crystals were formed in water or dilute phosphate buffer at neutral pH. The resulting crystal was a flat plate as previously described. Preparations of small crystals were negatively stained by mixing the suspension with equal volumes of 2% silicotungstate at neutral pH. A drop of the mixture was placed on a carbon coated grid and allowed to stand for a few minutes. The excess liquid was removed and the grid was immediately put in the microscope.

Microdomains in BaFeO3-y (0.35 < y < 0.50)

1990 ◽  
Vol 48 (4) ◽  
pp. 780-781
Author(s):  
M. Vallet-Regí ◽  
M. Parras ◽  
J.M. González-Calbet ◽  
J.C. Grenier
Keyword(s):  
Electron Diffraction ◽  
Chemical Analysis ◽  
Monoclinic Phase ◽  
Orthorhombic Phase ◽  
Total Iron ◽  
Zone Axis ◽  
Electron Micrograph ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compositional Variations

BaFeO3-y compositions (0.35<y<0.50) have been investigated by means of electron diffraction and microscopy to resolve contradictory results from powder X-ray diffraction data.The samples were obtained by annealing BaFeO2.56 for 48 h. in the temperature range from 980°C to 1050°C . Total iron and barium in the samples were determined using chemical analysis and gravimetric methods, respectively.In the BaFeO3-y system, according to the electron diffraction and microscopy results, the nonstoichiometry is accommodated in different ways as a function of the composition (y):In the domain between BaFeO2.5+δBaFeO2.54, compositional variations are accommodated through the formation of microdomains. Fig. la shows the ED pattern of the BaFeO2.52 material along thezone axis. The corresponding electron micrograph is seen in Fig. 1b. Several domains corresponding to the monoclinic BaFeO2.50 phase, intergrow with domains of the orthorhombic phase. According to that, the ED pattern of Fig. 1a, can be interpreted as formed by the superposition of three types of diffraction maxima : Very strong spots corresponding to a cubic perovskite, a set of maxima due to the superposition of three domains of the monoclinic phase along [100]m and a series of maxima corresponding to three domains corresponding to the orthorhombic phase along the [100]o.

Control of the phase composition of advanced calcium phosphates using an x-ray diffractometer with a curved position-sensitive detector

2020 ◽  
Vol 86 (6) ◽  
pp. 29-35
Author(s):  
V. P. Sirotinkin ◽  
O. V. Baranov ◽  
A. Yu. Fedotov ◽  
S. M. Barinov
Keyword(s):  
Phase Composition ◽  
Calcium Phosphates ◽  
Position Sensitive Detector ◽  
Sensitive Detector ◽  
X Ray Diffraction ◽  
X Ray ◽  
Impurity Phases ◽  
Position Sensitive ◽  
Diffraction Peaks ◽  
Diffraction Patterns

The results of studying the phase composition of advanced calcium phosphates Ca10(PO4)6(OH)2, β-Ca3(PO4)2, α-Ca3(PO4)2, CaHPO4 · 2H2O, Ca8(HPO4)2(PO4)4 · 5H2O using an x-ray diffractometer with a curved position-sensitive detector are presented. Optimal experimental conditions (angular positions of the x-ray tube and detector, size of the slits, exposure time) were determined with allowance for possible formation of the impurity phases during synthesis. The construction features of diffractometers with a position-sensitive detector affecting the profile characteristics of x-ray diffraction peaks are considered. The composition for calibration of the diffractometer (a mixture of sodium acetate and yttrium oxide) was determined. Theoretical x-ray diffraction patterns for corresponding calcium phosphates are constructed on the basis of the literature data. These x-ray diffraction patterns were used to determine the phase composition of the advanced calcium phosphates. The features of advanced calcium phosphates, which should be taken into account during the phase analysis, are indicated. The powder of high-temperature form of tricalcium phosphate strongly adsorbs water from the environment. A strong texture is observed on the x-ray diffraction spectra of dicalcium phosphate dihydrate. A rather specific x-ray diffraction pattern of octacalcium phosphate pentahydrate revealed the only one strong peak at small angles. In all cases, significant deviations are observed for the recorded angular positions and relative intensity of the diffraction peaks. The results of the study of experimentally obtained mixtures of calcium phosphate are presented. It is shown that the graphic comparison of experimental x-ray diffraction spectra and pre-recorded spectra of the reference calcium phosphates and possible impurity phases is the most effective method. In this case, there is no need for calibration. When using this method, the total time for analysis of one sample is no more than 10 min.

New Coordination Compounds of Fe(III) with Organic Ligands

2009 ◽  
Vol 59 (12) ◽  
Author(s):  
Mihaela Flondor ◽  
Ioan Rosca ◽  
Doina Sibiescu ◽  
Mihaela-Aurelia Vizitiu ◽  
Daniel-Mircea Sutiman ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Complex Compounds ◽  
Organic Ligands ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Chemical Analysis ◽  
Structural Formulae ◽  
Paramagnetic Properties

In this paper the synthesis and the study of some complex compounds of Fe(III) with ligands derived from: 2-(4-chloro-phenylsulfanyl)-1-(2-hydroxy-3,5-diiodo-phenyl)-ethanone (HL1), 1-(3,5-dibromo-2-hydroxy-phenyl)-2-phenylsulfanyl-ethanone(HL2), and 2-(4-chloro-phenylsulfanyl)-1-(3,5-dibromo-2-hydroxy-phenyl)-ethanone (HL3) is presented. The characterization of these complexes is based on method as: the elemental chemical analysis, IR and ESR spectroscopy, M�ssbauer, the thermogravimetric analysis and X-ray diffraction. Study of the IR and chemical analysis has evidenced that the precipitates form are a complexes and the combination ratio of M:L is 1:2. The central atoms of Fe(III) presented paramagnetic properties and a octaedric hybridization. Starting from this precipitation reactions, a method for the gravimetric determination of Fe(III) with this organic ligands has been possible. Based on the experimental data on literature indications, the structural formulae of the complex compounds are assigned.

Infrared spectroscopic study of the YPO4-YCrO4 system

1985 ◽  
Vol 50 (10) ◽  
pp. 2139-2145
Author(s):  
Alexander Muck ◽  
Eva Šantavá ◽  
Bohumil Hájek
Keyword(s):  
Spectroscopic Study ◽  
Infrared Spectra ◽  
Point Of View ◽  
Mixed Crystals ◽  
Crystal Symmetry ◽  
Infrared Spectroscopic Study ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infrared Spectroscopic ◽  
Diffraction Patterns

The infrared spectra and powder X-ray diffraction patterns of polycrystalline YPO4-YCrO4 samples are studied from the point of view of their crystal symmetry. Mixed crystals of the D4h19 symmetry are formed over the region of 0-30 mol.% YPO4 in YCrO4. The Td → D2d → D2 or C2v(GS eff) correlation is appropriate for both PO43- and CrO43- anions.

Hydrolytic products of Fe(III) after oxidation of Fe(II) by chlorate

1982 ◽  
Vol 47 (4) ◽  
pp. 1069-1077 ◽  
Author(s):  
Karel Mádlo ◽  
František Hanousek ◽  
Antonín Petřina ◽  
Jaroslav Tláskal
Keyword(s):  
Electron Microscopy ◽  
Ir Spectroscopy ◽  
Chemical Analysis ◽  
Ferrous Sulphate ◽  
Reaction Medium ◽  
Potassium Chlorate ◽  
X Ray Diffraction ◽  
X Ray

Ferrous sulphate was oxidized by potassium chlorate in the pH region 2-7 and at temperatures ranging from 298.1 to 323.1 K and various hydrolytic products of Fe(III) were separated and indentified. The separated solid ferric products were analyzed using a combination of the chemical analysis, IR spectroscopy, X-ray diffraction, and electron microscopy. The following substances were found as major components of the products: Fe2O3.n H2O ("ferric gel"), Fe2O3.n H2O with bound SO2-4 ions ("sulphogel"), α-FeO(OH), γ-FeO(OH) and Fe3O4. Their amount depends particularly on the pH temperature of the reaction medium.

scholarly journals Deep learning for visualization and novelty detection in large X-ray diffraction datasets

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Lars Banko ◽  
Phillip M. Maffettone ◽  
Dennis Naujoks ◽  
Daniel Olds ◽  
Alfred Ludwig
Keyword(s):  
Thin Film ◽  
Crystal Structure ◽  
Artificial Intelligence ◽  
Deep Learning ◽  
Novelty Detection ◽  
Structural Similarity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Post Hoc

AbstractWe apply variational autoencoders (VAE) to X-ray diffraction (XRD) data analysis on both simulated and experimental thin-film data. We show that crystal structure representations learned by a VAE reveal latent information, such as the structural similarity of textured diffraction patterns. While other artificial intelligence (AI) agents are effective at classifying XRD data into known phases, a similarly conditioned VAE is uniquely effective at knowing what it doesn’t know: it can rapidly identify data outside the distribution it was trained on, such as novel phases and mixtures. These capabilities demonstrate that a VAE is a valuable AI agent for aiding materials discovery and understanding XRD measurements both ‘on-the-fly’ and during post hoc analysis.

Sign in / Sign up

Export Citation Format

Share Document