scholarly journals Denoising of Atomic-Scale Images Based on Automatic Grain Segmentation, Unsupervised Primitive Unit Cell Extraction and Periodic Block-Matching

2016 ◽  
Vol 22 (S3) ◽  
pp. 1404-1405
Author(s):  
Benjamin Berkels ◽  
Niklas Mevenkamp
2021 ◽  
Vol 48 (9) ◽  
Author(s):  
G. Diego Gatta ◽  
Francesco Pagliaro ◽  
Paolo Lotti ◽  
Alessandro Guastoni ◽  
Laura Cañadillas-Delgado ◽  
...  

AbstractThe thermal behaviour of a natural allanite-(Ce) has been investigated up to 1073 K (at room pressure) by means of in situ synchrotron powder X-ray diffraction and single-crystal neutron diffraction. Allanite preserves its crystallinity up to 1073 K. However, up to 700 K, the thermal behaviour along the three principal crystallographic axes, of the monoclinic β angle and of the unit-cell volume follow monotonically increasing trends, which are almost linear. At T > 700–800 K, a drastic change takes place: an inversion of the trend is observed along the a and b axes (more pronounced along b) and for the monoclinic β angle; in contrast, an anomalous increase of the expansion is observed along the c axis, which controls the positive trend experienced by the unit-cell volume at T > 700–800 K. Data collected back to room T, after the HT experiments, show unit-cell parameters significantly different with respect to those previously measured at 293 K: allanite responds with an ideal elastic behaviour up to 700 K, and at T > 700–800 K its behaviour deviates from the elasticity field. The thermo-elastic behaviour up to 700 K was modelled with a modified Holland–Powell EoS; for the unit-cell volume, we obtained the following parameters: VT0 = 467.33(6) Å3 and αT0(V) = 2.8(3) × 10–5 K−1. The thermal anisotropy, derived on the basis of the axial expansion along the three main crystallographic directions, is the following: αT0(a):αT0(b):αT0(c) = 1.08:1:1.36. The T-induced mechanisms, at the atomic scale, are described on the basis of the neutron structure refinements at different temperatures. Evidence of dehydroxylation effect at T ≥ 848 K are reported. A comparison between the thermal behaviour of allanite, epidote and clinozoisite is carried out.


1996 ◽  
Vol 52 (1) ◽  
pp. 32-37 ◽  
Author(s):  
A. C. Lawson ◽  
J. A. Goldstone ◽  
B. Cort ◽  
R. J. Martinez ◽  
F. A. Vigil ◽  
...  

The structure of the ζ-phase in the Pu—U system has been determined by neutron powder diffraction. The phase crystallizes in space group R{\bar 3}m with 58 atoms in the primitive unit cell and 10 atoms in the asymmetric unit. The structure is characterized by many short bonds and fits the general pattern of the light actinides. Thermal expansion and elastic data were obtained from the diffraction experiments.


2005 ◽  
Vol 902 ◽  
Author(s):  
Kenji Takahashi ◽  
Muneyasu Suzuki ◽  
Mamoru Yoshimoto ◽  
Hiroshi Funakubo

Abstractc-axis-oriented epitaxial SrBi2Ta2O9 ultra-thin films were grown by pulse-gas-introduced metalorganic chemical vapor deposition (pulsed-MOCVD) on (100)SrTiO3 single crystal substrates with atomic scale step structure and their growth behavior was investigated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Minimum growth unit was found to be “ghalf-unit-cell” of SrBi2Ta2O9. Height of steps and width of terraces observed at SrBi2Ta2O9 film surface were in good agreement with those at SrTiO3 substrate surface. This shape transfer was induced by lattice displacement of SrBi2Ta2O9 along c-direction formed at atomic step on SrTiO3 substrate. In-plane growth of half-unit-cell SrBi2Ta2O9 2D-islands striding across the step walls was observed. It was considered to be a special phenomenon for c-axis-oriented films of layer-structured compounds due to their large crystal anisotropy and/or several times larger half-unit-cell height than single step one of SrTiO3.


1988 ◽  
Vol 133 ◽  
Author(s):  
M. Khantha ◽  
V. Vitek ◽  
D. P. Pope

ABSTRACTTwinning modes in topologically close-packed A-15 compounds are examined from a geometrical viewpoint. The crystallographically possible twinning modes with a shear less than a certain maximum are tabulated along with the percentage of shuffles involved for each of the modes. Based on some simple criteria, two of the most likely modes for deformation twinning are discussed in detail. The shuffle parameters usually employed to determine the percentage of lattice shuffles for a given mode have not been found to be useful in these structures because the primitive unit cell typically contains more than one formula unit. One has to examine the distribution of atoms in detail in order to determine the percentage of shuffles involved.


2008 ◽  
Vol 85 (1) ◽  
pp. 90 ◽  
Author(s):  
Linda M. Soper ◽  
John A. Hawkins ◽  
Jeffrey L. Rittenhouse ◽  
Robert C. Rittenhouse

2013 ◽  
Vol 19 (2) ◽  
pp. 310-318 ◽  
Author(s):  
Chun-Lin Jia ◽  
Juri Barthel ◽  
Felix Gunkel ◽  
Regina Dittmann ◽  
Susanne Hoffmann-Eifert ◽  
...  

AbstractA single layer of LaAlO3 with a nominal thickness of one unit cell, which is sandwiched between a SrTiO3 substrate and a SrTiO3 capping layer, is quantitatively investigated by high-resolution transmission electron microscopy. By the use of an aberration-corrected electron microscope and by employing sophisticated numerical image simulation procedures, significant progress is made in two aspects. First, the structural as well as the chemical features of the interface are determined simultaneously on an atomic scale from the same specimen area. Second, the evaluation of the structural and chemical data is carried out in a fully quantitative way on the basis of the absolute image contrast, which has not been achieved so far in materials science investigations using high-resolution electron microscopy. Considering the strong influence of even subtle structural details on the electronic properties of interfaces in oxide materials, a fully quantitative interface analysis, which makes positional data available with picometer precision together with the related chemical information, can contribute to a better understanding of the functionality of such interfaces.


1994 ◽  
Vol 9 (10) ◽  
pp. 2566-2573 ◽  
Author(s):  
T.M. Shaw ◽  
A. Gupta ◽  
M.Y. Chern ◽  
P.E. Batson ◽  
R.B. Laibowitz ◽  
...  

By depositing thin films under conditions where intensity oscillations are observed in RHEED (reflection high-energy electron diffraction) spots, unit cell level multilayers of SrTiO3/BaTiO3 structures have been grown by pulsed laser ablation. High resolution TEM (transmission electron microscopy) and STEM (scanning transmission electron microscopy) observations of the deposits show that epitaxial multilayers with layer thicknesses of 1, 2, 4, 8, and 16 unit cells can be grown on [100] orientation SrTiO3 substrates. The superlattices show partial intermixing of the Sr and Ba for layer thicknesses less than 8 unit cells, but incomplete intermixing occurs even when the layers are only a single unit cell thick. From observations of the degree of intermixing at different depths in the deposit, it was determined that most of the intermixing takes place during deposition and not during subsequent annealing of the deposit. The 16 and 8 unit cell thick BaTiO3 layers were found to be tetragonal with the c-axis of the layers oriented normal to the substrate but with the a-axis strained to coherently match the SrTiO3 layers.


Sign in / Sign up

Export Citation Format

Share Document