Investigation on effect of transmit condition on ultrasonic measurement of 2D motion velocity

A phase-sensitive 2D motion estimator is useful for measurement of minute tissue motion. However, the effect of conditions for emission of ultrasonic waves on the accuracy of such an estimator has not been investigated thoroughly. In the present study, the accuracy of the phase-sensitive 2D motion estimator was evaluated under a variety of transmission conditions. Although plane wave imaging with a single emission per frame achieved an extremely high temporal resolution of 10417 Hz, the accuracy in estimation of lateral velocities was worse than compound-based method or focused-beam method. By contrast, the accuracy in estimation of axial velocities hardly depended on the transmission conditions. Also, the phase-sensitive 2D motion estimator was combined with the block matching method to estimate displacements larger than the ultrasonic wavelength. Furthermore, the results show that the correlation coefficient in block matching has potential to be used for evaluation of the reliability of the estimated velocity.

Component-based Access Design Method for Dynamic Spatial Database

In order to realize the optimal access of dynamic spatial database, a component-based optimal access method of dynamic spatial database is proposed. The statistical information distribution model for storing the characteristic data of association rules is constructed in the dynamic spatial database. The fuzzy information features are extracted by using the dynamic component fusion clustering analysis method. Combined with the distributed association feature quantity, the fusion scheduling is carried out to control the dynamic information clustering. Combined with fuzzy c-means clustering analysis method, dynamic attribute classification analysis is carried out. The dynamic component block matching model is used for update iterative optimization, and the optimal access to the dynamic spatial database is realized in the cluster center. Simulation results show that this method has strong adaptability to the optimal access of dynamic spatial database, and has high accuracy and good convergence for data information extraction in dynamic spatial database.

Group-Based Sparse Representation for Compressed Sensing Image Reconstruction with Joint Regularization

Achieving high-quality reconstructions of images is the focus of research in image compressed sensing. Group sparse representation improves the quality of reconstructed images by exploiting the non-local similarity of images; however, block-matching and dictionary learning in the image group construction process leads to a long reconstruction time and artifacts in the reconstructed images. To solve the above problems, a joint regularized image reconstruction model based on group sparse representation (GSR-JR) is proposed. A group sparse coefficients regularization term ensures the sparsity of the group coefficients and reduces the complexity of the model. The group sparse residual regularization term introduces the prior information of the image to improve the quality of the reconstructed image. The alternating direction multiplier method and iterative thresholding algorithm are applied to solve the optimization problem. Simulation experiments confirm that the optimized GSR-JR model is superior to other advanced image reconstruction models in reconstructed image quality and visual effects. When the sensing rate is 0.1, compared to the group sparse residual constraint with a nonlocal prior (GSRC-NLR) model, the gain of the peak signal-to-noise ratio (PSNR) and structural similarity (SSIM) is up to 4.86 dB and 0.1189, respectively.

Application of Video Processing Technology Based on Diffusion Equation Model in Basketball Analysis

Video event detection and annotation work is an important content of video analysis and the basis of video content retrieval. Basketball is one of the most popular types of sports. Event detection and labeling of basketball videos can help viewers quickly locate events of interest and meet retrieval needs. This paper studies the application of anisotropic diffusion in video image smoothing, denoising, and enhancement. An improved form of anisotropic diffusion that can be used for video image enhancement is analyzed. This paper studies the anisotropic diffusion method for coherent speckle noise removal and proposes a video image denoising method that combines anisotropic diffusion and stationary wavelet transform. This paper proposes an anisotropic diffusion method based on visual characteristics, which adds a factor of video image detail while smoothing, and improves the visual effect of diffusion. This article discusses how to apply anisotropic diffusion methods and ideas to video image segmentation. We introduced the classic watershed segmentation algorithm and used forward-backward diffusion to process video images to reduce oversegmentation, introduced the active contour model and its improved GVF Snake, and analyzed the idea of how to use anisotropic diffusion and improve the GVF Snake model to get a new GGVF Snake model. In the study of basketball segmentation of close-up shots, we propose an improved Hough transform method based on a variable direction filter, which can effectively extract the center and radius of the basketball. The algorithm has good robustness to basketball partial occlusion and motion blur. In the basketball segmentation research of the perspective shot, the commonly used object segmentation method based on the change area detection is very sensitive to noise and requires the object not to move too fast. In order to correct the basketball segmentation deviation caused by the video noise and the fast basketball movement, we make corrections based on the peak characteristics of the edge gradient. At the same time, the internal and external energy calculation methods of the traditional active contour model are improved, and the judgment standard of the regional optimal solution and segmentation validity is further established. In the basketball tracking research, an improved block matching method is proposed. On the one hand, in order to overcome the influence of basketball’s own rotation, this article establishes a matching criterion that has nothing to do with the location of the area. On the other hand, this article improves the diamond motion search path based on the basketball’s motion correlation and center offset characteristics to reduce the number of searches and improve the tracking speed.

Denoising of Degenerative Lumbar Spine Lesions MRI Images Using Block-Matching and 3D Filtering

This work was aimed to explore the application of the L2-block-matching and 3-dimentional filtering (BM3D) (L2-BM3D) denoising algorithm in the treatment of lumbar degeneration with long- and short-segment fixation of posterior decompression. 120 patients with degenerative lumbar scoliosis were randomly divided into group A (MRI images were not processed), group B (MRI images were processed by the BM3D denoising algorithm), and group C (MRI images were processed by the BM3D denoising algorithm based on weighted norm L2). This denoising algorithm was comprehensively evaluated in terms of mean square error (MSE), peak signal-to-noise ratio (PSNR), structural similarity index measure (SSIM), and running time. Besides, the results of surgeries based on different denoising methods were assessed through the surgical time, intraoperative blood loss, postoperative drainage, and postoperative follow-up. The results showed the following: (1) PSNR (peak signal-to-noise ratio) and SSIM (structural similarity index measure) of the L2-BM3D algorithm are better than those of the BM3D algorithm (31.21 dB versus 29.33 dB, 0.83 versus 0.72), while mean square error (MSE) was less than that of the BM3D algorithm ( P < 0.05 ). (2) The operation time, intraoperative bleeding, and postoperative drainage volume in group C were lower than those in group B and group A ( P < 0.05 ). The postoperative follow-up results showed that, in group C, the postoperative VAS (visual analysis scale) score (1.03 ± 0.29) and ODI (Oswestry disability index) (9.29 ± 0.32) were lower, indicating that the postoperative recovery effect of patients was better. Therefore, the patient’s postoperative recovery effect was better. In conclusion, the L2-BM3D algorithm had an ideal denoising effect on MRI images of lumbar degeneration and was worthy of clinical promotion.

An Optimal Method for Extracting the Center of Light Stripes

A method for extracting the center of the light stripe to effectively reduce the environmental noise is proposed in this paper. The block matching algorithm is adapted to use the global information in the structured light image to group image blocks with similar light stripe structures. The center coordinates of the light stripe in each group of image blocks are extracted by the gray gravity method, and its average value is used as the final center of light stripes in the similar image block, which reduces the influence of random noise on the accuracy of the extraction algorithm.

Three-dimensional Spatial Localization Based on Binocular Vsion

In order to solve the problems of low accuracy and unstable system performance existing in binocular vision alone, this paper proposes a threedimensional space recognition and positioning algorithm based on binocular stereo vision and deep learning algorithms. First, a binocular camera for Zhang Zhengyou calibrated by several adjustments, calibration error will eventually set at 0.10pixels best, select and SAD in block matching algorithm in the algorithm, the matching point of the search range reduction, mitigation data for subsequent experiments burden. Then input the three-dimensional spatial data calculated by using the binocular ”parallax” principle into the Faster R-CNN model for data training, extract and classify the target features, and finally realize real-time detection of the target object and its position coordinate information. The analysis of experimental data shows that when the best calibration error is selected and the number of data training is sufficient, the algorithm in this paper can effectively improve the quality of target detection. The positioning accuracy and target recognition rate are increased by about 3%-5%, and it can achieve faster fps.

Speckle Tracking Algorithm-Based Cardiac Color Ultrasound in Diagnosis of Patients with Atrial Fibrillation Combined with Heart Failure

The study focused on the application of speckle tracking algorithm in the segmentation of cardiac color ultrasound images of patients with atrial fibrillation combined with heart failure. First, the optical flow method and block matching method were introduced on the basis of multiphase level set algorithm. Then, the pyramid block matching method was applied to build a pyramid model from bottom to top according to each image, and thus a new segmentation algorithm of cardiac color ultrasound image was constructed. The speckle tracking algorithm based on the pyramid block matching method was applied to segment cardiac color ultrasound images of 136 patients with atrial fibrillation and heart failure and compared with the traditional diagnosis for the sensitivity, specificity, and accuracy. It was found that the curve smoothness and accuracy of the algorithm in this study were better than the traditional level set algorithm, and it made up for the shortcomings of the traditional method. The proportion of patients of class III-IV cardiac function was significantly higher than that of non-atrial fibrillation patients, and the difference was statistically significant ( P < 0.05 ); patients of classes III-IV showed better left ventricular ejection fraction (LVEF) (42.4 ± 2.8%), left ventricular end-diastolic diameter (LVED) (58.7 ± 7.4 mm), left ventricular end-systolic diameter (LVSD) (49.3 ± 5.6 mm), and left atrial inner diameter (LAD) (55.0 ± 1.4 mm) versus those of classes I-II, of whom the corresponding indexes were 58.8 ± 3.3%, 48.5 ± 5.9 mm, 33.5 ± 4.5 mm, and 45.2 ± 2.0 mm. The accuracy of diagnosis based on the algorithm of this study (93.22%) was significantly higher than that of traditional method (79.23%), and the differences were statistically significant ( P < 0.05 ). In conclusion, the algorithm in this study improves the segmentation accuracy and smoothness of the curve, which is suggested in clinic.

An Improved Image Filtering Algorithm for Mixed Noise

In recent years, image filtering has been a hot research direction in the field of image processing. Experts and scholars have proposed many methods for noise removal in images, and these methods have achieved quite good denoising results. However, most methods are performed on single noise, such as Gaussian noise, salt and pepper noise, multiplicative noise, and so on. For mixed noise removal, such as salt and pepper noise + Gaussian noise, although some methods are currently available, the denoising effect is not ideal, and there are still many places worthy of improvement and promotion. To solve this problem, this paper proposes a filtering algorithm for mixed noise with salt and pepper + Gaussian noise that combines an improved median filtering algorithm, an improved wavelet threshold denoising algorithm and an improved Non-local Means (NLM) algorithm. The algorithm makes full use of the advantages of the median filter in removing salt and pepper noise and demonstrates the good performance of the wavelet threshold denoising algorithm and NLM algorithm in filtering Gaussian noise. At first, we made improvements to the three algorithms individually, and then combined them according to a certain process to obtain a new method for removing mixed noise. Specifically, we adjusted the size of window of the median filtering algorithm and improved the method of detecting noise points. We improved the threshold function of the wavelet threshold algorithm, analyzed its relevant mathematical characteristics, and finally gave an adaptive threshold. For the NLM algorithm, we improved its Euclidean distance function and the corresponding distance weight function. In order to test the denoising effect of this method, salt and pepper + Gaussian noise with different noise levels were added to the test images, and several state-of-the-art denoising algorithms were selected to compare with our algorithm, including K-Singular Value Decomposition (KSVD), Non-locally Centralized Sparse Representation (NCSR), Structured Overcomplete Sparsifying Transform Model with Block Cosparsity (OCTOBOS), Trilateral Weighted Sparse Coding (TWSC), Block Matching and 3D Filtering (BM3D), and Weighted Nuclear Norm Minimization (WNNM). Experimental results show that our proposed algorithm is about 2–7 dB higher than the above algorithms in Peak Signal-Noise Ratio (PSNR), and also has better performance in Root Mean Square Error (RMSE), Structural Similarity (SSIM), and Feature Similarity (FSIM). In general, our algorithm has better denoising performance, better restoration of image details and edge information, and stronger robustness than the above-mentioned algorithms.