scholarly journals Chipless RFID tags and sensors: a review on time-domain techniques

2015 ◽  
Vol 2 (2) ◽  
pp. 62-77 ◽  
Author(s):  
Mohammadali Forouzandeh ◽  
Nemai Chandra Karmakar
Keyword(s):  
Time Domain ◽  
Radio Frequency Identification ◽  
Time Domain Reflectometry ◽  
Ultra Wideband ◽  
Rfid Tags ◽  
Data Encoding ◽  
The Past ◽  
Rfid Systems ◽  
Chipless Rfid ◽  
Frequency Identification

In the past few years Radio Frequency Identification(RFID)has grown to be one of the most popular technologies in the area of identification systems. Following a brief survey of RFID systems, this paper provides a technical review of work undertaken in the field of time-domain chipless RFID tags and sensors. This paper aims not only to address the chipless tags which use Time Domain Reflectometry (TDR) concept for data encoding but also for the use of Ultra-Wideband Impulse-Radar (UWB-IR) as a time-domain measurement technique. The penultimate section intends to focus on time-domain reading setups and finally, a brief comparison between this method and other chipless techniques is provided.

scholarly journals Three-Dimensional Chipless RFID Tags: Fabrication through Additive Manufacturing

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4740
Author(s):  
Sergio Terranova ◽  
Filippo Costa ◽  
Giuliano Manara ◽  
Simone Genovesi
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Three Dimensional ◽  
Rfid Tags ◽  
Metallic Surfaces ◽  
Data Encoding ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
3D Printed ◽  
Promising Solution

A new class of Radio Frequency IDentification (RFID) tags, namely the three-dimensional (3D)-printed chipless RFID one, is proposed, and their performance is assessed. These tags can be realized by low-cost materials, inexpensive manufacturing processes and can be mounted on metallic surfaces. The tag consists of a solid dielectric cylinder, which externally appears as homogeneous. However, the information is hidden in the inner structure of the object, where voids are created to encrypt information in the object. The proposed chipless tag represents a promising solution for anti-counterfeiting or security applications, since it avoids an unwanted eavesdropping during the reading process or information retrieval from a visual inspection that may affect other chipless systems. The adopted data-encoding algorithm does not rely on On–Off or amplitude schemes that are commonly adopted in the chipless RFID implementations but it is based on the maximization of available states or the maximization of non-overlapping regions of uncertainty. The performance of such class of chipless RFID tags are finally assessed by measurements on real prototypes.

scholarly journals Frequency-Coded Chipless RFID Tags: Notch Model, Detection, Angular Orientation, and Coverage Measurements

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 1843 ◽  
Author(s):  
Jahangir Alam ◽  
Maher Khaliel ◽  
Abdelfattah Fawky ◽  
Ahmed El-Awamry ◽  
Thomas Kaiser
Keyword(s):  
Cross Section ◽  
Radio Frequency Identification ◽  
Measurement Errors ◽  
Federal Communications Commission ◽  
Ultra Wideband ◽  
Mathematical Representation ◽  
Rfid Tags ◽  
Angular Orientation ◽  
Chipless Rfid ◽  
Frequency Identification

This paper focuses on the frequency coded chipless Radio Frequency Identification (RFID) wherein the tag’s information bits are physically encoded by the resonators’ notch position which has an effect on the frequency spectrum of the backscattered or retransmitted signal of the tag. In this regard, the notch analytical model is developed to consider the notch position and quality factor. Besides, the radar cross section (RCS) mathematical representation of the tag is introduced to consider the incident wave’s polarization and orientation angles. Hence, the influences of the incident wave’s orientation and polarization mismatches on the detection performance are quantified. After that, the tag measurement errors and limitations are comprehensively explained. Therefore, approaches to measureing RCS- and retransmission-based tags are introduced. Furthermore, the maximum reading range is theoretically calculated and practically verified considering the Federal Communications Commission (FCC) Ultra Wideband (UWB) regulations. In all simulations and experiments conducted, a mono-static configuration is considered, in which one antenna is utilized for transmission and reception.

scholarly journals On the application of the EM-imaging for chipless RFID tags

2015 ◽  
Vol 2 (2) ◽  
pp. 86-96 ◽  
Author(s):  
M. Zomorrodi ◽  
N.C. Karmakar
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
60 Ghz ◽  
Rfid Tag ◽  
High Data ◽  
Data Encoding ◽  
Bending Effect ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Cost Item

The electromagnetic (EM) imaging technique at mm-band 60 GHz is proposed for data encoding purpose in the chipless Radio Frequency Identification (RFID) systems. The fully printable chipless RFID tag comprises tiny conductive EM polarizers to create high cross-polar radar cross-section. Synthetic aperture radar approach is applied for formation of the tag's EM-image and revealing the tag's content. The achieved high data encoding capacity of 2 bits/cm2in this technique based on a fully printable tag is very convincing for many applications. The system immunity to multipath interference, bending effect, and printing inaccuracy suggests huge potentials for low-cost item tagging. Tags are also readable through a tick paper envelop; hence secure identification is provided by the proposed technique.

scholarly journals Four-State Coupled-Line Resonator for Chipless RFID Tags Application

Electronics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 581 ◽  
Author(s):  
Wazie M. Abdulkawi ◽  
Abdel-Fattah A. Sheta
Keyword(s):  
Dielectric Constant ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Microstrip Resonator ◽  
Coupled Line ◽  
Chipless Rfid ◽  
Compact Size ◽  
Frequency Identification ◽  
The Cost ◽  
Good Agreement

A novel quad-state coupled-line microstrip resonator is proposed for compact chipless radio frequency identification (RFID) tags. The proposed resonator can be reconfigured to present one of four possible states: 00, 01, 10, and 11, representing, no resonance, resonance at f2, resonance at f1, and resonance at both f1 and f2, respectively. The frequency span between f2 and f1 can be easily controlled, thereby reducing the required spectrum. Moreover, the proposed technique allows the storage of a large amount of data in a compact size to reduce the cost per bit. A multi-resonator prototype consisting of six resonators is designed, analyzed, and experimentally characterized. This prototype is implemented on the RT Duroid 5880 substrate with a dielectric constant of 2.2, loss tangent of 0.0009, and thickness of 0.79 mm. The designed configuration can be reconfigured for 46 codes. Two complete the RFID tags, including the six resonators and two orthogonally polarized transmitting and receiving antennas, are implemented and tested. The first tag code is designed for all ones, 111111111111, and the second tag is designed as 101010101010 code. Experimental results show good agreement with the simulation.

Investigation on the chipless RFID tag with a UWB pulse using a UWB IR-based reader

2021 ◽  
pp. 1-10
Author(s):  
Kawther Mekki ◽  
Omrane Necibi ◽  
Hugo Dinis ◽  
Paulo Mendes ◽  
Ali Gharsallah
Keyword(s):  
Radio Frequency Identification ◽  
Ultra Wideband ◽  
Rfid Tag ◽  
Triangular Patch ◽  
Chipless Rfid ◽  
Frequency Domains ◽  
Measurement Results ◽  
Reader Antenna ◽  
Frequency Identification ◽  
Working Principle

Abstract In order to encrypt/encode data based on the magnitude level of the radar cross-section (RCS), we propose an approach with a precise estimation considering the resonant characteristics of a multipatch backscatter-based chipless radio frequency identification (RFID) dedicated for chipless tags depolarization. The working principle is based on the polarization mismatch between the tag and the reader antenna to control the magnitude of the backscatter, which allows a reliable detection in real environments. We introduce in this paper a new 4-bit chipless RFID tag with an enhanced RCS, based on a triangular patch antenna with multiple resonators. Additionally, we propose an ultra-wideband impulse radar (UWB-IR)-based reader that interrogates the chipless tag with a UWB pulse, and the received backscatter was studied in both time- and frequency-domains. The antenna was operating from 4.7 to 6.1 GHz, a band allocated for RFID systems. The obtained experimental measurement results in the environment of anechoic chamber were exceptionally relevant to validate the simulation results.

scholarly journals Reader Scheduling for Tag Population Estimation in Multicategory and Multireader RFID Systems

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhiyong He
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Rfid Tags ◽  
Rfid Technology ◽  
Rfid Systems ◽  
Estimation Scheme ◽  
Scheduling Method ◽  
Frequency Identification ◽  
Coloring Graph ◽  
Monitoring Area

Radio Frequency Identification (RFID) technology has been used in numerous applications, e.g., supply chain management and inventory control. This paper focuses on the practically important problem of the rapid estimation of the number of tags in large-scale RFID systems with multiple readers and multicategory RFID tags. RFID readers are often static and have to be deployed strategically after careful planning to cover the entire monitoring area, but reader-to-reader collision (R2Rc) remains a problem. R2Rc decreases the reliability of the estimation of the tag population size, because it results in the failure of communication between the reader and tags. In this paper, we propose a coloring graph-based estimation scheme (CGE), which is the first estimation framework designed for multireader and multicategory RFID systems to determine the distribution of tags in different categories. CGE allows for the use of any estimation protocol to determine the number of tags, prevents R2Rc, and results in higher time efficiency and less power-consumption than the classic scheduling method DCS.

scholarly journals Miniaturized Chipless RFID Tags Based on Periodically Loaded Microstrip Structure

2019 ◽  
Vol 9 (5) ◽  
pp. 4679-4684
Author(s):  
M. Added ◽  
K. Rabaani ◽  
S. Chabaan ◽  
N. Boulejfen
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Resonant Circuit ◽  
Rfid Tags ◽  
Frequency Range ◽  
Rfid Tag ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Coding Capacity ◽  
Microstrip Structure

A compact chipless radio frequency identification (RFID) tag-based on slow-wave technology is introduced in this paper. The tag consists of a resonant circuit based on open stub resonators periodically loaded by shunt stubs allowing a coding capacity of 9 bits and operating in a frequency range from 2 to 4GHz. The receiving and transmitting antennas of the tag are particularly designed to minimize the tag size as much as possible. The proposed tag presents a robust bit pattern with a compact and fully printable structure using FR4 substrate for a low-cost tag.

scholarly journals On the Security of Rotation Operation Based Ultra-Lightweight Authentication Protocols for RFID Systems

2018 ◽  
Vol 10 (9) ◽  
pp. 82
Author(s):  
Masoumeh Safkhani ◽  
Nasour Bagheri ◽  
Mahyar Shariat
Keyword(s):  
Radio Frequency Identification ◽  
Success Probability ◽  
Authentication Protocol ◽  
Rfid Tags ◽  
Rfid Systems ◽  
Frequency Identification ◽  
Lightweight Authentication ◽  
The Given ◽  
Rotation Function ◽  
Lightweight Encryption

Passive Radio Frequency IDentification (RFID) tags are generally highly constrained and cannot support conventional encryption systems to meet the required security. Hence, designers of security protocols may try to achieve the desired security only using limited ultra-lightweight operations. In this paper, we show that the security of such protocols is not provided by using rotation functions. In the following, for an example, we investigate the security of an RFID authentication protocol that has been recently developed using rotation function named ULRAS, which stands for an Ultra-Lightweight RFID Authentication Scheme and show its security weaknesses. More precisely, we show that the ULRAS protocol is vulnerable against de-synchronization attack. The given attack has the success probability of almost ‘1’, with the complexity of only one session of the protocol. In addition, we show that the given attack can be used as a traceability attack against the protocol if the parameters’ lengths are an integer power of 2, e.g., 128. Moreover, we propose a new authentication protocol named UEAP, which stands for an Ultra-lightweight Encryption based Authentication Protocol, and then informally and formally, using Scyther tool, prove that the UEAP protocol is secure against all known active and passive attacks.

scholarly journals Frequency-Spectra-Based High Coding Capacity Chipless RFID Using an UWB-IR Approach

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2525
Author(s):  
Kawther Mekki ◽  
Omrane Necibi ◽  
Hugo Dinis ◽  
Paulo Mendes ◽  
Ali Gharsallah
Keyword(s):  
Radio Frequency Identification ◽  
Ultra Wideband ◽  
Frequency Spectra ◽  
Rfid Tag ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Main Components ◽  
The Time Domain ◽  
Antenna Mode ◽  
Structural Mode

A novel methodology is proposed to reliably predict the resonant characteristics of a multipatch backscatter-based radio frequency identification (RFID) chipless tag. An ultra-wideband impulsion radio (UWB-IR)-based reader interrogates the chipless tag with a UWB pulse, and analyzes the obtained backscatter in the time domain. The RFID system consists of a radar cross-section (RCS)-based chipless tag containing a square microstrip patch antenna array in which the chipless tag is interrogated with a UWB pulse by an UWB-IR-based reader. The main components of the backscattered signal, the structural mode, and the antenna mode were identified and their spectral quality was evaluated. The study revealed that the antenna-mode backscatter includes signal carrying information, while the structural mode backscatter does not include any tag information. The simulation findings were confirmed by experimental measurements obtained in an anechoic chamber environment using a 6-bit multipatch chipless RFID tag. Finally, the novel technique does not use calibration tags and can freely orient tags with respect to the reader.

Sign in / Sign up

Export Citation Format

Share Document