A Much Cleaner Oxidation Process for 2,2′-Dibenzothiazole Disulfide Synthesis Catalyzed by Phosphotungstic Acid

Author(s):  
Jiaxin Tian ◽  
Zifei Yan ◽  
Jian Deng ◽  
Guangsheng Luo
Author(s):  
R. R. Dils ◽  
P. S. Follansbee

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.


Author(s):  
E. N. Albert

Silver tetraphenylporphine sulfonate (Ag-TPPS) was synthesized in this laboratory and used as an electron dense stain for elastic tissue (Fig 1). The procedures for the synthesis of tetraphenylporphine sulfonate and the staining method for mature elastic tissue have been described previously.The fine structure of developing elastic tissue was observed in fetal and new born rat aorta using tetraphenylporphine sulfonate, phosphotungstic acid, uranyl acetate and lead citrate. The newly forming elastica consisted of two morphologically distinct components. These were a central amorphous and a peripheral fibrous. The ratio of the central amorphous and the peripheral fibrillar portion changed in favor of the former with increasing age.It was also observed that the staining properties of the two components were entirely different. The peripheral fibrous component stained with uranyl acetate and/or lead citrate while the central amorphous portion demonstrated no affinity for these stains. On the other hand, the central amorphous portion of developing elastic fibers stained vigorously with silver tetraphenylporphine sulfonate, while the fibrillar part did not (compare figs 2, 3, 4). Based upon the above observations it is proposed that developing elastica consists of two components that are morphologically and chemically different.


Author(s):  
J. Quatacker ◽  
W. De Potter

Mucopolysaccharides have been demonstrated biochemically in catecholamine-containing subcellular particles in different rat, cat and ox tissues. As catecholamine-containing granules seem to arise from the Golgi apparatus and some also from the axoplasmic reticulum we examined wether carbohydrate macromolecules could be detected in the small and large dense core vesicles and in structures related to them. To this purpose superior cervical ganglia and irises from rabbit and cat and coeliac ganglia and their axons from dog were subjected to the chromaffin reaction to show the distribution of catecholamine-containing granules. Some material was also embedded in glycolmethacrylate (GMA) and stained with phosphotungstic acid (PTA) at low pH for the detection of carbohydrate macromolecules.The chromaffin reaction in the perikarya reveals mainly large dense core vesicles, but in the axon hillock, the axons and the terminals, the small dense core vesicles are more prominent. In the axons the small granules are sometimes seen inside a reticular network (fig. 1).


Author(s):  
L. P. Lemaire ◽  
D. E. Fornwalt ◽  
F. S. Pettit ◽  
B. H. Kear

Oxidation resistant alloys depend on the formation of a continuous layer of protective oxide scale during the oxidation process. The initial stages of oxidation of multi-component alloys can be quite complex, since numerous metal oxides can be formed. For oxidation resistance, the composition is adjusted so that selective oxidation occurs of that element whose oxide affords the most protection. Ideally, the protective oxide scale should be i) structurally perfect, so as to avoid short-circuit diffusion paths, and ii) strongly adherent to the alloy substrate, which minimizes spalling in response to thermal cycling. Small concentrations (∼ 0.1%) of certain reactive elements, such as yttrium, markedly improve the adherence of oxide scales in many alloy systems.


Author(s):  
César D. Fermin ◽  
Dale Martin

Otoconia of higher vertebrates are interesting biological crystals that display the diffraction patterns of perfect crystals (e.g., calcite for birds and mammal) when intact, but fail to produce a regular crystallographic pattern when fixed. Image processing of the fixed crystal matrix, which resembles the organic templates of teeth and bone, failed to clarify a paradox of biomineralization described by Mann. Recently, we suggested that inner ear otoconia crystals contain growth plates that run in different directions, and that the arrangement of the plates may contribute to the turning angles seen at the hexagonal faces of the crystals.Using image processing algorithms described earlier, and Fourier Transform function (2FFT) of BioScan Optimas®, we evaluated the patterns in the packing of the otoconia fibrils of newly hatched chicks (Gallus domesticus) inner ears. Animals were fixed in situ by perfusion of 1% phosphotungstic acid (PTA) at room temperature through the left ventricle, after intraperitoneal Nembutal (35mg/Kg) deep anesthesia. Negatives were made with a Hitachi H-7100 TEM at 50K-400K magnifications. The negatives were then placed on a light box, where images were filtered and transferred to a 35 mm camera as described.


Author(s):  
C. D. Humphrey ◽  
C.S. Goldsmith ◽  
L. Elliott ◽  
S.R. Zaki

An outbreak of unexplained acute pulmonary syndrome with high fatality was recognized in the spring of 1993 in the southwestern United States. The cause of the illness was quickly identified serologically and genetically as a hantavirus and the disease was named hantavirus pulmonary syndrome (HPS). Recently, the virus was isolated from deer mice which had been trapped near the homes of HPS patients, and cultivated in Vero E6 cells. We identified the cultivated virus by negative-stain direct and colloidal gold immune electron microscopy (EM).Virus was extracted, clarified, and concentrated from unfixed and 0.25% glutaraldehyde fixed supernatant fluids of infected Vero E6 cells by a procedure described previously. Concentrated virus suspensions tested by direct EM were applied to glow-discharge treated formvar-carbon filmed grids, blotted, and stained with 0.5% uranyl acetate (UA) or with 2% phosphotungstic acid (PTA) pH 6.5. Virus suspensions for immune colloidal gold identification were adsorbed similarly to filmed grids but incubated for 1 hr on drops of 1:50 diluted monoclonal antibody to Prospect Hill virus nucleoprotein or with 1:50 diluted sera from HPS virus infected deer mice.


Author(s):  
Blayne Fritz ◽  
Stanley J. Naides ◽  
Kenneth Moore

The pseudoreplica method of staining viral particles for visualization by transmission electron microscopy is a very popular technique. The ability to concentrate clinical specimens while semi-embedding viral particles makes it especially well suited for morphologic and diagnostic virology. Immunolabelling viral particles with colloidal gold is a technique frequently employed by both research and diagnostic virologists. We have characterized a procedure which provides the advantage of both by modifying and combining pseudoreplica staining and immunogold labelling.Modification of specimen retrieval and delay of staining allows us to utilize pseudoreplica processed specimens within our standard immunogold labelling protocol. In brief, we absorbed samples onto 2% agarose, added.25% Formvar and wicked dry. We then floated the Formvar-virus film onto double distilled water, added grids and retrieved with parafilm. The Formvar-virus specimens were then treated as thin tissue sections within our standard two stage immunolabelling protocol. Following completion of immunogold labelling; each grid was negatively stained with phosphotungstic acid or uranyl acetate contrast stains.


2018 ◽  
Author(s):  
Younghwan Cha ◽  
Jung-In Lee ◽  
Panpan Dong ◽  
Xiahui Zhang ◽  
Min-Kyu Song

A novel strategy for the oxidation of Mg-based intermetallic compounds using CO<sub>2</sub> as an oxidizing agent was realized via simple thermal treatment, called ‘CO2-thermic Oxidation Process (CO-OP)’. Furthermore, as a value-added application, electrochemical properties of one of the reaction products (carbon-coated macroporous silicon) was evaluated. Considering the facile tunability of the chemical/physical properties of Mg-based intermetallics, we believe that this route can provide a simple and versatile platform for functional energy materials synthesis as well as CO<sub>2</sub> chemical utilization in an environment-friendly and sustainable way.


Sign in / Sign up

Export Citation Format

Share Document