scholarly journals Mechanical Counterbalance of Kinesin and Dynein Motors in a Microtubular Network Regulates Cell Mechanics, 3D Architecture, and Mechanosensing

ACS Nano ◽  
2021 ◽  
Author(s):  
Alexander S. Zhovmer ◽  
Alexis Manning ◽  
Chynna Smith ◽  
James B. Hayes ◽  
Dylan T. Burnette ◽  
...  
2021 ◽  
Author(s):  
Alexander S Zhovmer ◽  
Alexis Manning ◽  
Chynna Smith ◽  
James B Hayes ◽  
Dylan Tyler Burnette ◽  
...  

Microtubules (MTs) and MT motor proteins form active 3D networks made of unstretchable cables with rod-like bending mechanics that provide cells with a dynamically changing structural scaffold. In this study, we report an antagonistic mechanical balance within the dynein-kinesin microtubular motor system. Dynein activity drives microtubular network inward compaction, while isolated activity of kinesins bundles and expands MTs into giant circular bands that deform the cell cortex into discoids. Furthermore, we show that dyneins recruit MTs to sites of cell adhesion increasing topographic contact guidance of cells, while kinesins antagonize it via retraction of MTs from sites of cell adhesion. Actin-to-microtubules translocation of septin-9 enhances kinesins-MTs interactions, outbalances activity of kinesins over dyneins and induces discoid architecture of cells. These orthogonal mechanisms of MT network reorganization highlight the existence of an intricate mechanical balance between motor activities of kinesins and dyneins that controls cell 3D architecture, mechanics, and cell-microenvironment interactions.


2018 ◽  
Author(s):  
Liangshan Chen ◽  
Yuting Wei ◽  
Tanya Schaeffer ◽  
Chongkhiam Oh

Abstract The paper reports the investigation on the root cause of source-drain leakage in bulk FinFET devices. While the failing device was readily isolated by nanoprobing technique and the electrical analysis pinpointed the potential defect location inside the Fin channel, the identification of physical root cause went through extreme challenges imposed by the tiny-sized device and the unique FinFET 3D architecture. The initial TEM analysis was misled by the projection of a species in the lamella surface and thus could not explain the electrical data. Careful analysis on the device structure was able to identify the origin of the species and led to the discovery of the actual root cause. This paper will provide the analysis details leading to the findings, and highlight the role of electrical understanding in not only providing guidance for physical analysis but also revealing the true root cause of failure in FinFET devices.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1304
Author(s):  
Wenchao Wu ◽  
Yongguang Hu ◽  
Yongzong Lu

Plant leaf 3D architecture changes during growth and shows sensitive response to environmental stresses. In recent years, acquisition and segmentation methods of leaf point cloud developed rapidly, but 3D modelling leaf point clouds has not gained much attention. In this study, a parametric surface modelling method was proposed for accurately fitting tea leaf point cloud. Firstly, principal component analysis was utilized to adjust posture and position of the point cloud. Then, the point cloud was sliced into multiple sections, and some sections were selected to generate a point set to be fitted (PSF). Finally, the PSF was fitted into non-uniform rational B-spline (NURBS) surface. Two methods were developed to generate the ordered PSF and the unordered PSF, respectively. The PSF was firstly fitted as B-spline surface and then was transformed to NURBS form by minimizing fitting error, which was solved by particle swarm optimization (PSO). The fitting error was specified as weighted sum of the root-mean-square error (RMSE) and the maximum value (MV) of Euclidean distances between fitted surface and a subset of the point cloud. The results showed that the proposed modelling method could be used even if the point cloud is largely simplified (RMSE < 1 mm, MV < 2 mm, without performing PSO). Future studies will model wider range of leaves as well as incomplete point cloud.


Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 115
Author(s):  
Lukas Seewald ◽  
Robert Winkler ◽  
Gerald Kothleitner ◽  
Harald Plank

Additive, direct-write manufacturing via a focused electron beam has evolved into a reliable 3D nanoprinting technology in recent years. Aside from low demands on substrate materials and surface morphologies, this technology allows the fabrication of freestanding, 3D architectures with feature sizes down to the sub-20 nm range. While indispensably needed for some concepts (e.g., 3D nano-plasmonics), the final applications can also be limited due to low mechanical rigidity, and thermal- or electric conductivities. To optimize these properties, without changing the overall 3D architecture, a controlled method for tuning individual branch diameters is desirable. Following this motivation, here, we introduce on-purpose beam blurring for controlled upward scaling and study the behavior at different inclination angles. The study reveals a massive boost in growth efficiencies up to a factor of five and the strong delay of unwanted proximal growth. In doing so, this work expands the design flexibility of this technology.


Cells ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 851
Author(s):  
Veronika Pfannenstill ◽  
Aurélien Barbotin ◽  
Huw Colin-York ◽  
Marco Fritzsche

Mechanobiology seeks to understand how cells integrate their biomechanics into their function and behavior. Unravelling the mechanisms underlying these mechanobiological processes is particularly important for immune cells in the context of the dynamic and complex tissue microenvironment. However, it remains largely unknown how cellular mechanical force generation and mechanical properties are regulated and integrated by immune cells, primarily due to a profound lack of technologies with sufficient sensitivity to quantify immune cell mechanics. In this review, we discuss the biological significance of mechanics for immune cells across length and time scales, and highlight several experimental methodologies for quantifying the mechanics of immune cells. Finally, we discuss the importance of quantifying the appropriate mechanical readout to accelerate insights into the mechanobiology of the immune response.


2019 ◽  
Vol 110 ◽  
pp. 368-387 ◽  
Author(s):  
Matthieu Dupuis ◽  
Patrice Imbert ◽  
Francis Odonne ◽  
Bruno Vendeville

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Christian Aermes ◽  
Alexander Hayn ◽  
Tony Fischer ◽  
Claudia Tanja Mierke

AbstractThe knowledge of cell mechanics is required to understand cellular processes and functions, such as the movement of cells, and the development of tissue engineering in cancer therapy. Cell mechanical properties depend on a variety of factors, such as cellular environments, and may also rely on external factors, such as the ambient temperature. The impact of temperature on cell mechanics is not clearly understood. To explore the effect of temperature on cell mechanics, we employed magnetic tweezers to apply a force of 1 nN to 4.5 µm superparamagnetic beads. The beads were coated with fibronectin and coupled to human epithelial breast cancer cells, in particular MCF-7 and MDA-MB-231 cells. Cells were measured in a temperature range between 25 and 45 °C. The creep response of both cell types followed a weak power law. At all temperatures, the MDA-MB-231 cells were pronouncedly softer compared to the MCF-7 cells, whereas their fluidity was increased. However, with increasing temperature, the cells became significantly softer and more fluid. Since mechanical properties are manifested in the cell’s cytoskeletal structure and the paramagnetic beads are coupled through cell surface receptors linked to cytoskeletal structures, such as actin and myosin filaments as well as microtubules, the cells were probed with pharmacological drugs impacting the actin filament polymerization, such as Latrunculin A, the myosin filaments, such as Blebbistatin, and the microtubules, such as Demecolcine, during the magnetic tweezer measurements in the specific temperature range. Irrespective of pharmacological interventions, the creep response of cells followed a weak power law at all temperatures. Inhibition of the actin polymerization resulted in increased softness in both cell types and decreased fluidity exclusively in MDA-MB-231 cells. Blebbistatin had an effect on the compliance of MDA-MB-231 cells at lower temperatures, which was minor on the compliance MCF-7 cells. Microtubule inhibition affected the fluidity of MCF-7 cells but did not have a significant effect on the compliance of MCF-7 and MDA-MB-231 cells. In summary, with increasing temperature, the cells became significant softer with specific differences between the investigated drugs and cell lines.


Author(s):  
Jinjie Lin ◽  
Daniel Cohen-Or ◽  
Hao Zhang ◽  
Cheng Liang ◽  
Andrei Sharf ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document