Parameters in Addition to the Unit Cell That Determine the Cracking Activity and Selectivity of Dealuminated HY Zeolites

1988 ◽  
pp. 542-554 ◽  
Author(s):  
A. Corma ◽  
V. Fornés ◽  
A. Martínez ◽  
A. V. Orchillés
Keyword(s):  
Unit Cell ◽  
Hy Zeolites

High-resolution structure determination by ALCHEMI

1983 ◽  
Vol 41 ◽  
pp. 178-181 ◽  
Author(s):  
Peter G. Self ◽  
Peter R. Buseck
Keyword(s):  
Site Occupancy ◽  
Real Space ◽  
Unit Cell ◽  
Bragg Angle ◽  
Electron Current ◽  
High Resolution Structure ◽  
Beam Incident ◽  
Crystallographic Planes ◽  
Electron Beam Incident ◽  
Resolution Structure

ALCHEMI (Atom Location by CHanneling Enhanced Microanalysis) enables the site occupancy of atoms in single crystals to be determined. In this article the fundamentals of the method for both EDS and EELS will be discussed. Unlike HRTEM, ALCHEMI does not place stringent resolution requirements on the microscope and, because EDS clearly distinguishes between elements of similar atomic number, it can offer some advantages over HRTEM. It does however, place certain constraints on the crystal. These constraints are: a) the sites of interest must lie on alternate crystallographic planes, b) the projected charge density on the alternate planes must be significantly different, and c) there must be at least one atomic species that lies solely on one of the planes.An electron beam incident on a crystal undergoes elastic scattering; in reciprocal space this is seen as a diffraction pattern and in real space this is a modulation of the electron current across the unit cell. When diffraction is strong (i.e., when the crystal is oriented near to the Bragg angle of a low-order reflection) the electron current at one point in the unit cell will differ significantly from that at another point.

The External Shape of Human γ GI Immunoglobulin from Crystal Sections

1971 ◽  
Vol 29 ◽  
pp. 428-429
Author(s):  
L. W. Labaw
Keyword(s):  
Molecular Weight ◽  
Sodium Phosphate ◽  
Osmium Tetroxide ◽  
Unit Cell ◽  
Monoclinic Space Group ◽  
X Ray ◽  
Large Molecular Weight ◽  
Cell Dimensions ◽  
Unit Cell Dimensions ◽  
Crystallographic Axes

Crystals of a human γGl immunoglobulin have the external morphology of diamond shaped prisms. X-ray studies have shown them to be monoclinic, space group C2, with 2 molecules per unit cell. The unit cell dimensions are a = 194.1, b = 91.7, c = 51.6Å, 8 = 102°. The relatively large molecular weight of 151,000 and these unit cell dimensions made this a promising crystal to study in the EM.Crystals similar to those used in the x-ray studies were fixed at 5°C for three weeks in a solution of mother liquor containing 5 x 10-5M sodium phosphate, pH 7.0, and 0.03% glutaraldehyde. They were postfixed with 1% osmium tetroxide for 15 min. and embedded in Maraglas the usual way. Sections were cut perpendicular to the three crystallographic axes. Such a section cut with its plane perpendicular to the z direction is shown in Fig. 1.This projection of the crystal in the z direction shows periodicities in at least four different directions but these are only seen clearly by sighting obliquely along the micrograph.

The orientation of sickle hemoglobin fibers within fascicles

1988 ◽  
Vol 46 ◽  
pp. 400-401
Author(s):  
Christopher A. Miller ◽  
Bridget Carragher ◽  
William A. McDade ◽  
Robert Josephs
Keyword(s):  
Sickle Cell ◽  
Sickle Cell Anemia ◽  
Relative Orientation ◽  
Unit Cell ◽  
Red Cell ◽  
High Ph ◽  
Sickle Hemoglobin ◽  
Polar Crystal ◽  
Helical Configuration

Highly ordered bundles of deoxyhemoglobin S (HbS) fibers, termed fascicles, are intermediates in the high pH crystallization pathway of HbS. These fibers consist of 7 Wishner-Love double strands in a helical configuration. Since each double strand has a polarity, the odd number of double strands in the fiber imparts a net polarity to the structure. HbS crystals have a unit cell containing two double strands, one of each polarity, resulting in a net polarity of zero. Therefore a rearrangement of the double strands must occur to form a non-polar crystal from the polar fibers. To determine the role of fascicles as an intermediate in the crystallization pathway it is important to understand the relative orientation of fibers within fascicles. Furthermore, an understanding of fascicle structure may have implications for the design of potential sickling inhibitors, since it is bundles of fibers which cause the red cell distortion responsible for the vaso-occlusive complications characteristic of sickle cell anemia.

Kinematical and Dynamical CBED Pattern Models: Increasing the Accuracy of the Unit-Cell Parameter Measurements Based on CBED Patterns

1990 ◽  
Vol 48 (2) ◽  
pp. 540-541
Author(s):  
I.N. Yadhikov ◽  
S.K. Maksimov
Keyword(s):  
Reciprocal Lattice ◽  
Unit Cell ◽  
Reciprocal Lattice Vector ◽  
Unit Cell Parameters ◽  
Lattice Vector ◽  
Cell Parameters ◽  
Accuracy Of Measurements ◽  
The Difference ◽  
Image Position ◽  
Convergent Beam

Convergent beam electron diffraction (CBED) is widely used as a microanalysis tool. By the relative position of HOLZ-lines (Higher Order Laue Zone) in CBED-patterns one can determine the unit cell parameters with a high accuracy up to 0.1%. For this purpose, maps of HOLZ-lines are simulated with the help of a computer so that the best matching of maps with experimental CBED-pattern should be reached. In maps, HOLZ-lines are approximated, as a rule, by straight lines. The actual HOLZ-lines, however, are different from the straights. If we decrease accelerating voltage, the difference is increased and, thus, the accuracy of the unit cell parameters determination by the method becomes lower.To improve the accuracy of measurements it is necessary to give up the HOLZ-lines substitution by the straights. According to the kinematical theory a HOLZ-line is merely a fragment of ellipse arc described by the parametric equationwith arc corresponding to change of β parameter from -90° to +90°, wherevector, h - the distance between Laue zones, g - the value of the reciprocal lattice vector, g‖ - the value of the reciprocal lattice vector projection on zero Laue zone.

Structure Information From Electron Diffraction Intensities

1990 ◽  
Vol 48 (2) ◽  
pp. 516-517
Author(s):  
J. Gjønnes ◽  
N. Bøe ◽  
K. Gjønnes
Keyword(s):  
Computational Effort ◽  
Unit Cell ◽  
Small Unit ◽  
Structure Information ◽  
Dispersion Surface ◽  
Integrated Intensity ◽  
The One ◽  
Image Position ◽  
Convergent Beam ◽  
Beam Patterns

Structure information of high precision can be extracted from intentsity details in convergent beam patterns like the one reproduced in Fig 1. From low order reflections for small unit cell crystals,bonding charges, ionicities and atomic parameters can be derived, (Zuo, Spence and O’Keefe, 1988; Zuo, Spence and Høier 1989; Gjønnes, Matsuhata and Taftø, 1989) , but extension to larger unit cell ma seem difficult. The disks must then be reduced in order to avoid overlap calculations will become more complex and intensity features often less distinct Several avenues may be then explored: increased computational effort in order to handle the necessary many-parameter dynamical calculations; use of zone axis intensities at symmetry positions within the CBED disks, as in Figure 2 measurement of integrated intensity across K-line segments. In the last case measurable quantities which are well defined also from a theoretical viewpoint can be related to a two-beam like expression for the intensity profile:With as an effective Fourier potential equated to a gap at the dispersion surface, this intensity can be integrated across the line, with kinematical and dynamical limits proportional to and at low and high thickness respctively (Blackman, 1939).

The crystal structure of eugaAl

1992 ◽  
Vol 50 (2) ◽  
pp. 1452-1453
Author(s):  
H. Brigitte Krause ◽  
Yonglin Qian
Keyword(s):  
Crystal Structure ◽  
Electron Microscope ◽  
Zone Axis ◽  
Unit Cell ◽  
Polycrystalline Specimen ◽  
Lattice Constants

A polycrystalline specimen of nominal formula EuGaAl with unknown crystal structure was investigated by various electron microscope techniques; EDS-, SED-, and CBED data were taken on a Philips 400 electron microscope operated at 100kV, HREM data on a Hitachi 9000 microscope operated at 300kV. The EDS data confirmed the composition for the bulk of the material but, in addition, revealed particles with other fractions of the elements. Only the EuGaAl particles were further investigated. The unit cell was determined to be orthorhombic with a ratio: a/b=0.969(2) , a/c=0.234(2) and b/c=0.234(2). The lattice constants are a=4.54(5)Ȧ, b=4.68Ȧ and c=19.97(20)Ȧ. Based on systematic extinctions for hkl reflections with h+l=2n+l, the unit cell was found to be b-centered. CBED patterns of the [001], [100], and [010] zone axes are shown in Fig. 1. The zone axis patterns are in agreement with the above stated data except for diffused (2m+l,2n+l,0)- reflections, not compatible with the above stated systematic absences. But these occurred only occasionally in conjunction with a complicated noncommensurate superlattice pattern.

Epitaxy and texture analysis of Bi-Sr-Ca-Cu-O thin films on (100) MgO using Transmission Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 68-69
Author(s):  
J. T. Sizemore ◽  
D. G. Schlom ◽  
Z. J. Chen ◽  
J. N. Eckstein ◽  
I. Bozovic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Critical Currents ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Cell Axis ◽  
Transmission Electron ◽  
Synthesis Procedure

Investigators observe large critical currents for superconducting thin films deposited epitaxially on single crystal substrates. The orientation of these films is often characterized by specifying the unit cell axis that is perpendicular to the substrate. This omits specifying the orientation of the other unit cell axes and grain boundary angles between grains of the thin film. Misorientation between grains of YBa2Cu3O7−δ decreases the critical current, even in those films that are c axis oriented. We presume that these results are similar for bismuth based superconductors and report the epitaxial orientations and textures observed in such films.Thin films of nominally Bi2Sr2CaCu2Ox were deposited on MgO using molecular beam epitaxy (MBE). These films were in situ grown (during growth oxygen was incorporated and the films were not oxygen post-annealed) and shuttering was used to encourage c axis growth. Other papers report the details of the synthesis procedure. The films were characterized using x-ray diffraction (XRD) and transmission electron microscopy (TEM).

Site occupancy in gamma alumina

1996 ◽  
Vol 54 ◽  
pp. 654-655
Author(s):  
C. A. Bateman ◽  
A.Z. Ringwelski ◽  
R.W. Broach
Keyword(s):  
Spinel Structure ◽  
Site Occupancy ◽  
Unit Cell ◽  
Neutron Diffraction Data ◽  
Gamma Alumina ◽  
Tetrahedral Sites ◽  
Powder Neutron Diffraction ◽  
Cation Sites ◽  
Powder Neutron Diffraction Data ◽  
Insufficient Number

Gamma (γ) alumina is referred to as a defect spinel because it has a tetragonally distorted spinel structure (AB2O4) and an insufficient number of cations to fill all cation sites. In the spinel structure, the oxygen lattice is cubic close packed with A- and B-site cations in tetrahedral and octahedral coordination, respectively. The 2l⅓ Al atoms per unit cell of γ alumina can distribute themselves across 16 octahedral and 8 tetrahedral sites.The literature differs on where the 2⅔ cation vacancies per unit cell are located. Wilson and McConnell proposed that the vacancies in γ alumina, as first formed by calcining boehmite, are predominantly on the tetrahedral lattice but, with further heat treatment, move to occupy random positions on both octahedral and tetrahedral lattices. One study using NMR showed that the vacancies lay exclusively on the tetrahedral lattice, independent of the calcination temperature. A more-recent study using Rietveld refinement of powder neutron diffraction data suggested that both octahedral and tetrahedral lattices were partially occupied.

Sectioned rubisco crystals in TEM

1990 ◽  
Vol 48 (3) ◽  
pp. 664-665
Author(s):  
Gunnel Karlsson ◽  
Jan-Olov Bovin ◽  
Michael Bosma
Keyword(s):  
Plant Cell ◽  
Carbon Fixation ◽  
Unit Cell ◽  
Protein Crystals ◽  
Unit Cell Parameters ◽  
Cell Parameters ◽  
Photosynthetic Carbon Fixation ◽  
Photosynthetic Carbon

RuBisCO (D-ribulose-l,5-biphosphate carboxylase/oxygenase) is the most aboundant enzyme in the plant cell and it catalyses the key carboxylation reaction of photosynthetic carbon fixation, but also the competing oxygenase reaction of photorespiation. In vitro crystallized RuBisCO has been studied earlier but this investigation concerns in vivo existance of RuBisCO crystals in anthers and leaves ofsugarbeets. For the identification of in vivo protein crystals it is important to be able to determinethe unit cell of cytochemically identified crystals in the same image. In order to obtain the best combination of optimal contrast and resolution we have studied different staining and electron accelerating voltages. It is known that embedding and sectioning can cause deformation and obscure the unit cell parameters.

Toward quantitative defect analysis using HREM

1994 ◽  
Vol 52 ◽  
pp. 714-715
Author(s):  
David J. Smith
Keyword(s):  
Electron Microscope ◽  
Unit Cell ◽  
Defect Analysis ◽  
Significant Progress ◽  
Detailed Characterization ◽  
Small Unit ◽  
Resolution Electron ◽  
High Resolution Electron Microscope ◽  
Large Unit Cell ◽  
Made In

The electron microscope has evolved to the level where it is now straightforward to record highresolution images from thin samples (t∼10 to 20nm) that are directly interpretable in terms of atomic arrangements. Whilst recorded images necessarily represent two-dimensional projections of the structure, many defects such as dislocations and interfaces may be linear or planar in nature and thus might be expected to be amenable to detailed characterization. In this review, we briefly consider the recent significant progress that has been made in quantitative defect analysis using the high-resolution electron microscope and then discuss some drawbacks to the technique as well as potential scope for further improvements. Surveys of defect modelling for some small-unit-cell materials and interfaces have recently been published, and reference should be made to other papers in this symposium for further examples.The technique of structure imaging originated in the early '70s with observations of large-unit-cell block oxides.

Sign in / Sign up

Export Citation Format

Share Document