scholarly journals Assessment of Upper Tropospheric Water Vapor Monthly Variation in Reanalyses With Near‐Global Homogenized 6.5‐μm Radiances From Geostationary Satellites

2020 ◽  
Vol 125 (18) ◽  
Author(s):  
Yunheng Xue ◽  
Jun Li ◽  
Zhenglong Li ◽  
Riyu Lu ◽  
Mathew M. Gunshor ◽  
...  
2019 ◽  
Vol 46 (17-18) ◽  
pp. 10599-10608 ◽  
Author(s):  
Zhenglong Li ◽  
Jun Li ◽  
Mathew Gunshor ◽  
Szu‐Chia Moeller ◽  
Timothy J. Schmit ◽  
...  

2020 ◽  
Vol 12 (5) ◽  
pp. 861
Author(s):  
Tasuku Tabata ◽  
Viju O. John ◽  
Rob A. Roebeling ◽  
Tim Hewison ◽  
Jörg Schulz

The authors wish to make the following corrections to this paper [...]


2006 ◽  
Vol 45 (12) ◽  
pp. 1622-1633 ◽  
Author(s):  
Catherine Prigent ◽  
Juan R. Pardo ◽  
William B. Rossow

Abstract Geostationary satellites provide revisiting times that are desirable for nowcasting and observations of severe weather. To overcome the problem of spatial resolution from a geostationary orbit, millimeter to submillimeter wave sounders have been suggested. This study compares the capabilities of various oxygen and water vapor millimeter and submillimeter bands for temperature and water vapor atmospheric profiling at nadir in cloudy situations. It shows the impact of different cloud types on the received signal for the different frequency bands. High frequencies are very sensitive to the cloud ice phase, with potential applications to cirrus characterization.


2019 ◽  
Vol 11 (10) ◽  
pp. 1189 ◽  
Author(s):  
Tasuku Tabata ◽  
Viju O. John ◽  
Rob A. Roebeling ◽  
Tim Hewison ◽  
Jörg Schulz

Infrared sounding measurements of the Infrared Atmospheric Sounding Interferometer (IASI), Atmospheric Infrared Sounder (AIRS), and High-resolution Infrared Radiation Sounder/2 (HIRS/2) instruments are used to recalibrate infrared (IR; ~11 µm) channels and water vapor (WV; ~6 µm) channels of the Visible and Infrared Spin Scan Radiometer (VISSR), Japanese Advanced Meteorological Imager (JAMI), and IMAGER instruments onboard the historical geostationary satellites of the Japan Meteorological Agency (JMA). The recalibration was performed using a common recalibration method developed by European Organization for the Exploitation of Meteorological Satellites (EUMETSAT), which can be applied to the historical geostationary satellites to produce Fundamental Climate Data Records (FCDR). Pseudo geostationary imager radiances were computed from the infrared sounding measurements and regressed against the radiances from the geostationary satellites. Recalibration factors were computed from these pseudo imager radiance pairs. This paper presents and evaluates the result of recalibration of longtime-series of IR (1978–2016) and WV (1995–2016) measurements from JMA’s historical geostationary satellites. For the IR data of the earlier satellites (Geostationary Metrological Satellite (GMS) to GMS-4) significant seasonal variations in radiometric biases were observed. This suggests that the sensors on GMS to GMS-4 were strongly affected by seasonal variations in solar illumination. The amplitudes of these seasonal variations range from 3 K for the earlier satellites to <0.4 K for the recent satellites (GMS-5, Geostationary Operational Environmental Satellite-9 (GOES-9), Multi-functional Transport Satellite-1R (MTSAT-1R) and MTSAT-2). For the WV data of GOES-9, MTSAT-1R and MTSAT-2, no seasonal variations in radiometric biases were observed. However, for GMS-5, the amplitude of seasonal variation in bias was about 0.5 K. Overall, the magnitude of the biases for GMS-5, MTSAT-1R and MTSAT-2 were smaller than 0.3 K. Finally, our analysis confirms the existence of errors due to atmospheric absorption contamination in the operational Spectral Response Function (SRF) of the WV channel of GMS-5. The method used in this study is based on the principles developed within Global Space-based Inter-calibration System (GSICS). Moreover, presented results contribute to the Inter-calibration of imager observations from time-series of geostationary satellites (IOGEO) project under the umbrella of the World Meteorological Organization (WMO) initiative Sustained and Coordinated Processing of Environmental Satellite data for Climate Monitoring (SCOPE-CM).


2018 ◽  
Author(s):  
Gary Jedlovec ◽  
Emily Berndt ◽  
Kevin Fuell ◽  
Frank LaFontaine ◽  
Nicholas Elmer

Author(s):  
R. C. Moretz ◽  
G. G. Hausner ◽  
D. F. Parsons

Electron microscopy and diffraction of biological materials in the hydrated state requires the construction of a chamber in which the water vapor pressure can be maintained at saturation for a given specimen temperature, while minimally affecting the normal vacuum of the remainder of the microscope column. Initial studies with chambers closed by thin membrane windows showed that at the film thicknesses required for electron diffraction at 100 KV the window failure rate was too high to give a reliable system. A single stage, differentially pumped specimen hydration chamber was constructed, consisting of two apertures (70-100μ), which eliminated the necessity of thin membrane windows. This system was used to obtain electron diffraction and electron microscopy of water droplets and thin water films. However, a period of dehydration occurred during initial pumping of the microscope column. Although rehydration occurred within five minutes, biological materials were irreversibly damaged. Another limitation of this system was that the specimen grid was clamped between the apertures, thus limiting the yield of view to the aperture opening.


Author(s):  
V. R. Matricardi ◽  
G. G. Hausner ◽  
D. F. Parsons

In order to observe room temperature hydrated specimens in an electron microscope, the following conditions should be satisfied: The specimen should be surrounded by water vapor as close as possible to the equilibrium vapor pressure corresponding to the temperature of the specimen.The specimen grid should be inserted, focused and photo graphed in the shortest possible time in order to minimize dehydration.The full area of the specimen grid should be visible in order to minimize the number of changes of specimen required.There should be no pressure gradient across the grid so that specimens can be straddled across holes.Leakage of water vapor to the column should be minimized.


Author(s):  
E. L. Vigil ◽  
E. F. Erbe

In cotton seeds the radicle has 12% moisture content which makes it possible to prepare freeze-fracture replicas without fixation or cryoprotection. For this study we have examined replicas of unfixed radicle tissue fractured at room temperature to obtain data on organelle and membrane structure.Excised radicles from seeds of cotton (Gossyplum hirsutum L. M-8) were fractured at room temperature along the longitudinal axis. The fracture was initiated by spliting the basal end of the excised radicle with a razor. This procedure produced a fracture through the tissue along an unknown fracture plane. The warm fractured radicle halves were placed on a thin film of 100% glycerol on a flat brass cap with fracture surface up. The cap was rapidly plunged into liquid nitrogen and transferred to a freeze- etch unit. The sample was etched for 3 min at -95°C to remove any condensed water vapor and then cooled to -150°C for platinum/carbon evaporation.


Sign in / Sign up

Export Citation Format

Share Document